Thin sputter deposited gold films on In2O3:Sn, SnO2:In, TiO2 and glass: Optical, electrical and structural effects
Source abstract
Abstract
Abstract Thin gold films are promising transparent conductors with many actual and potential uses in “green” technologies, transparent electronics, etc. These applications require different substrate materials, and hence it is important to understand the role of the substrate on Au thin film growth. Such effects have been studied in this work wherein Au films—ranging from island structures, via large scale coalescence into meandering metal networks, to thin homogenous layers—were deposited by DC magnetron sputtering onto glass substrates and In2O3:Sn (ITO), SnO2:In and TiO2 base layers backed by glass. Optical, electrical and structural properties were recorded for films deposited onto unheated substrates. We found distinct and characteristic differences in Au growth on the various backings. Thus ITO and SnO2:In base layers yielded gold films with island features remaining to larger thicknesses than for deposition directly onto glass, and the sheet resistance was lower for gold deposition onto SnO2:In and ITO only when the gold films were less than ~5 nm in thickness. Our results highlight the complexity of substrates' influence on thin film formation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Smith · 2010
2. 2012
3. Wager · 2008
4. 2010
5. Barquinha · 2012
6. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
7. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures10.1002/adma.201003188 ↗
8. Transparent conducting oxide semiconductors for transparent electrodes10.1088/0268-1242/20/4/004 ↗
9. 2010
10. Indium: Geology
11. Pulmonary alveolar proteinosis in workers at an indium processing facility10.1164/rccm.200907-1022CR ↗
12. Review of pulmonary toxicity of indium compounds to animals and humans10.1016/j.tsf.2009.10.123 ↗
13. Indium lung—case reports and epidemiology10.1007/s00420-010-0575-6 ↗
14. C. Bright, Alternative to ITO for plastic substrates: vacuum deposited, flexible, ultra-transparent conductive material with polymer/metal/polymer layers, in: Paper Presented at the 3rd International Symposium on Transparent Conductive Materials, Analipsi, Crete, Greece, 17–21 October, 2010, unpublished.
15. H. Mayer, Physik Dünner Schichten Gesamtbibliographie, Wissenschaftliche Verlagsgesellchaft mbH, Stuttgart, Germany, vol. 1 and 2, 1972.
16. 1970
17. Smith · 1995
18. Pulker · 1999
19. H.J. Gläser, Large Area Glass Coating, von Ardenne Anlagentechnik GmbH, Dresden, Germany, 2000.
20. Mahan · 2000
21. Ohring · 2002
22. Mattox · 2010
23. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
24. A study of transparent, highly conducting gold films10.1080/14786441008521119 ↗
25. Heat-reflecting windows using gold and bismuth oxide films10.1088/0508-3443/9/9/304 ↗
26. Radiative heating and cooling with spectrally selective surfaces10.1364/AO.20.002606 ↗
27. Diamond-like carbon based low-emissive coatings10.1016/j.solmat.2011.01.015 ↗
28. Effect of oxygen flow rate on the electrical properties of a transparent SiON/Ag/SiON multilayer10.1149/2.009202esl ↗
29. Fabrication and characterization of Ag intermediate transparent and conducting TiON/Ag/TiON multilayer films10.1016/j.optcom.2010.12.066 ↗
30. Tunable Ag surface-plasmon-resonance wavelength and its application on the photochromic behaviour of TiO2–Ag films10.1016/j.spmi.2008.10.043 ↗
31. Highly transparent, low resistance, and cost-efficient Nb:TiO2/Ag/Nb:TiO2 multilayer electrode prepared at room temperature using black Nb:TiO2 target10.1149/1.3313361 ↗
32. Semitransparent polymer solar cells using V2O5/Ag/V2O5 as transparent anodes10.1016/j.orgel.2011.03.036 ↗
33. Effect of Ag film thickness on the optical and the electrical properties in CuAlO2/Ag/CuAlO2 multilayer films grown on glass substrates10.1016/j.jallcom.2010.10.180 ↗
34. Conduction and transmission analysis in gold nanolayers embedded in zinc oxide for flexible electronics10.1063/1.3435467 ↗
35. Effect of an interface charge density wave on surface plasmon resonance in ZnO/Ag/ZnO thin films10.1063/1.3442916 ↗
36. The study of transmittance and conductivity by top ZnO thickness in ZnO/Ag/ZnO transparent conducting films10.1166/asl.2011.1681 ↗
37. Effect of silver evolution on conductivity and transmittance of ZnO/Ag thin films10.1063/1.3592975 ↗
38. Optimization of ZnO/Ag/ZnO multilayer electrodes obtained by ion beam sputtering for optoelectronic devices10.1016/j.tsf.2011.10.193 ↗
39. Comparison of ITO/metal/ITO and ZnO/metal/ZnO characteristics as transparent electrodes for third generation solar cells10.1016/j.solmat.2012.01.007 ↗
40. Optimum structure of metal oxide under-layer used in Ag-based multilayer10.1016/j.vacuum.2008.04.025 ↗
41. Nanoscale silver-based Al-doped ZnO multilayer transparent-conductive oxide films10.1149/1.3147376 ↗
42. Influence of a Ag layer on AZO/Ag/AZO multilayer thin films prepared by facing targets sputtering10.3938/jkps.54.1302 ↗
43. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
44. Development of ZnO-based transparent conductive coatings10.1016/j.solmat.2009.07.004 ↗
45. Transparent electrodes based on metal and metal oxide stacked layers grown at room temperature on polymer substrate10.1002/pssa.200983707 ↗
46. AZO/Ag/AZO multilayer films prepared by DC magnetron sputtering for dye-sensitized solar cell application10.1016/j.cap.2009.09.020 ↗
47. Highly transparent and conductive Al-doped ZnO/Ag/Al-doped ZnO multilayer source/drain electrodes for transparent oxide thin film resistors10.1149/1.3533436 ↗
48. Optimization of ZnO:Al/Ag/ZnO:Al structures for ultra-thin high-performance transparent conductive electrodes10.1016/j.tsf.2012.02.080 ↗
49. Room-temperature indium-free Ga:ZnO/Ag/Ga:ZnO multilayer electrode for organic solar cell applications10.1149/1.3149537 ↗
50. Thin Ag layer inserted GZO multilayer grown by roll-to-roll sputtering for flexible and transparent conducting electrodes10.1149/1.3454125 ↗
51. Effect of GZO thickness and annealing temperature on the structural, electrical and optical properties of GZO/Ag/GZO sandwich film10.1016/j.cap.2009.07.002 ↗
52. Flexible ZnSnO3/Ag/ZnSnO3 multilayer electrodes grown by roll-to-roll sputtering on flexible polyethersulfone substrates
53. Efficient large area semitransparent organic solar cells based on highly transparent and conductive ZTO/Ag/ZTO multilayer top electrodes10.1016/j.orgel.2011.06.015 ↗
54. Realization of ultrathin silver layers in highly conductive and transparent zinc tin oxide/silver/zinc tin oxide multilayer electrodes deposited at room temperature for transparent organic devices10.1016/j.tsf.2011.10.122 ↗
55. Influence of Ag thickness on structural, optical, and electrical properties of ZnS/Ag/ZnS multilayers prepared by ion beam assisted deposition10.1063/1.3490787 ↗
56. The effect of annealing on structural, electrical and optical properties of nanostructured ZnS/Ag/ZnS10.1016/j.tsf.2011.03.023 ↗
57. Highly flexible organic light-emitting diodes based on ZnS/Ag/WO3 multilayer transparent electrodes10.1016/j.orgel.2009.06.004 ↗
58. Influence of Ag thickness on the electrical, optical and structural properties of nanocrystalline MoO3/Ag/ITO multilayer for optoelectronic applications10.1016/j.vacuum.2011.12.002 ↗
59. Semitransparent inverted polymer solar cells using MoO3/Ag/WO3 as highly transparent anodes10.1016/j.solmat.2010.11.009 ↗
60. The effect of Ag layer thickness on the properties of WO3/Ag/MoO3 multilayer films as anode in organic light emitting diodes10.1016/j.jlumin.2011.12.001 ↗
61. Semitransparent inverted polymer solar cells with MoO3/Ag/MoO3 as transparent electrode10.1063/1.3196763 ↗
62. Investigation of low resistant transparent MoO3/Ag/MoO3 multilayer and application as anode in organic solar cells10.1016/j.tsf.2009.12.031 ↗
63. Comparison of electrical, optical, structural, and interface properties of IZO–Ag–IZO and IZO–Au–IZO multilayer electrodes for organic photovoltaics10.1063/1.3294605 ↗
64. Optical study of InZnO/Ag/InZnO thin films grown on glass substrates by using spectroscopic ellipsometry: Plasmon and antireflection effect10.3938/jkps.56.625 ↗
65. Stacking sequence effect on the electrical and optical properties of multistacked flexible IZO–Ag–IZO electrodes10.1149/1.3312755 ↗
66. Flexible indium zinc oxide/Ag/indium zinc oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics10.1116/1.3264464 ↗
67. Tensile strain and water vapour transport testing of flexible, conductive and transparent indium-zinc-oxide/silver/indium-zinc-oxide thin films10.1016/j.tsf.2011.01.252 ↗
68. Effect of electron beam irradiation on the electrical and optical properties of ITO/Ag/ITO and IZO/Ag/IZO films10.1016/j.tsf.2011.01.220 ↗
69. Mechanical integrity of flexible InZnO/Ag/InZnO multilayer electrodes grown by continuous roll-to-roll sputtering10.1016/j.solmat.2011.08.001 ↗
70. Transparent conductive ITO/Ag/ITO multilayer electrodes deposited by sputtering at room temperature10.1016/j.optcom.2008.10.075 ↗
71. Effect of Ag thickness on electrical transport and optical properties of indium tin oxide–Ag–indium tin oxide multilayers10.1063/1.3153977 ↗
72. Low resistance and highly transparent ITO–Ag–ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cells10.1016/j.solmat.2009.06.014 ↗
73. Room temperature flexible and transparent ITO/Ag/ITO electrode grown on flexible PES substrate by continuous roll-to-roll sputtering for flexible organic photovoltaics10.1088/0022-3727/42/23/235109 ↗
74. Comparative investigation of transparent ITO/Ag/ITO and ITO/Cu/ITO electrodes grown by dual-target DC sputtering for organic photovoltaics10.1149/1.3131362 ↗
75. Morphology and characterization of ITO-Ag-ITO films on fibers by layer-by-layer method10.1016/j.apsusc.2009.05.017 ↗
76. Transparent conductive ITO/Ag/ITO multilayer films prepared by low temperature process and physical properties10.1080/15421400903584465 ↗
77. High quality transparent conductive ITO/Ag/ITO multilayer films deposited on glass substrate at room temperature10.1080/15421406.2010.497048 ↗
78. Relationship between surface plasmon and transmittance enhancement in indium-tin-oxide/Ag/indium-tin-oxide multilayer electrodes10.1016/j.tsf.2011.12.058 ↗
79. Silver layer instability in a SnO2/Ag/SnO2 trilayer on silicon10.1016/j.tsf.2012.05.033 ↗
80. Organic photovoltaic cells fabricated on a SnOx/Ag/SnOx multilayer transparent conducting oxide10.1016/j.tsf.2012.05.029 ↗
81. Optical properties of WO3/Ag/WO3 multilayer as transparent cathode in top-emitting organic light emitting diode
82. Effects of the optical microcavity on the performance of ITO-free polymer solar cells with WO3/Ag/WO3 transparent electrode10.1016/j.solmat.2012.01.021 ↗
83. BCP/Ag/MoO3 transparent cathodes for organic photovoltaics10.1002/aenm.201100411 ↗
84. Improved optical properties of transparent low-emissivity coatings using an asymmetrical structure containing two silver-alloy layers10.1143/JJAP.48.125505 ↗
85. Study on the durability against heat in ITO/Ag-alloy/ITO transparent conductive multilayer system10.1002/pssa.200983769 ↗
86. Flexible IZO/Ag/IZO/Ag multilayer electrode grown on a polyethylene terephthalate substrate using roll-to-roll sputtering
87. The structural and optoelectrical properties of TiON/Au/TiON multilayer films10.1016/j.matlet.2009.12.032 ↗
88. Progress in chromogenics: new results for electrochromic and thermochromic materials and devices10.1016/j.solmat.2009.02.026 ↗
89. TiO2/Au/TiO2 multilayer thin films: novel metal-based transparent conductors for electrochromic devices10.1016/j.tsf.2009.02.158 ↗
90. Influence of Au thickness on the optical and electrical properties of transparent and conducting TiO2/Au/TiO2 multilayer films10.1016/j.optcom.2009.12.067 ↗
91. Characterization of TiO2/Au/TiO2 films deposited by magnetron sputtering on polycarbonate substrates10.1016/j.apsusc.2010.07.038 ↗
92. Annealing effect of ZnO/Au/ZnO transparent conductive films10.1016/j.vacuum.2012.02.041 ↗
93. Charaterization of ZnO:Al/Au/ZnO:Al trilayers for high performance transparent conducting electrodes10.1016/j.tsf.2010.09.049 ↗
94. Development of new localized surface plasmon resonance interfaces based on gold nanostructures sandwiched between tin-doped indium oxide films10.1021/la903330d ↗
95. Characterization of low pressure annealed ITO/Au/ITO films prepared by reactive magnetron sputtering10.1016/j.jallcom.2009.12.056 ↗
96. Low temperature deposition of transparent conducting ITO/Au/ITO films by reactive magnetron sputtering10.1016/j.apsusc.2009.10.002 ↗
97. Influence of vacuum annealing on the physical properties of ZnO/Al/ZnO multilayer coatings10.1116/1.3072512 ↗
98. Effect of Al nanoparticles on the microstructure, electrical and optical properties of AZO/Al/AZO trilayer thin film10.1007/s11664-011-1810-y ↗
99. Investigation of conductive and transparent ITO/Ni/ITO multilayer films deposited by a magnetron sputtering process10.1016/j.nimb.2009.10.180 ↗
100. Optical properties of ultrathin copper thin films sandwiched between Nb-doped TiO2 films studied with spectroscopic ellipsometry