journal article·2022-03

Sustaining efficiency at elevated power densities in InGaAs airbridge thermophotovoltaic cells

Bosun Roy-Layinde, Tobias Burger, Dejiu Fan, Byungjun Lee, Sean McSherry, Stephen R. Forrest, Andrej Lenert

Publisher page

Abstract

Recent work has demonstrated record-high thermophotovoltaic efficiency using thin-film InGaAs cells, but the power density of devices remains low. Elevated power densities are relevant to many thermophotovoltaic (TPV) applications, ranging from mobile generators to stationary energy storage of renewable electricity, and require effective management of heat and charge carriers. Here we investigate the use of single-junction InGaAs airbridge cells (ABCs) under such conditions. Experimental characterization of an InGaAs ABC with varying emitter and cell temperature is used to develop a predictive device model where carrier lifetimes and series resistances are the sole fitting parameters. The utility of this model is demonstrated through its use in identifying near-term opportunities for improving performance at elevated power densities, and for designing a thermal management strategy that maximizes overall power output. After accounting for the power necessary to cool the cells, this model shows that an InGaAs ABC with high material quality can reach a peak efficiency of ∼41% at 0.5 W/cm 2, corresponding to an emitter temperature of 1070 °C, and sustain efficiencies above 36% up to 1.5 W/cm 2.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Enhanced photovoltaic energy conversion using thermally based spectral shaping10.1038/nenergy.2016.68 ↗
2. Micro combined heat and power (MCHP) technologies and applications10.1016/j.rser.2013.07.053 ↗
3. Thermophotovoltaic furnace-generator for the home using low bandgap GaSb cells10.1088/0268-1242/18/5/316 ↗
4. Feasibility study of a thermo-photo-voltaic system for CHP application in residential buildings10.1016/j.apenergy.2012.01.049 ↗
5. Thermophotovoltaics: a potential pathway to high efficiency concentrated solar power10.1039/C6EE01372D ↗
6. Levelised cost of storage for pumped heat energy storage in comparison with other energy storage technologies10.1016/j.enconman.2017.09.047 ↗
7. Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversion10.1016/j.energy.2016.04.048 ↗
8. Thermal energy grid storage using multi-junction photovoltaics10.1039/C8EE02341G ↗
9. Recent developments in thermophotovoltaic conversion
10. Greater than 20% radiant heat conversion efficiency of a thermophotovoltaic radiator/module system using reflective spectral control10.1109/TED.2003.823247 ↗
11. Ultraefficient thermophotovoltaic power conversion by band-edge spectral filtering10.1073/pnas.1903001116 ↗
12. Thin-film architectures with high spectral selectivity for thermophotovoltaic cells10.1021/acsphotonics.8b00508 ↗
13. Thin films for enhanced photon recycle in thermophotovoltaics
14. A highly efficient NiO-doped MgO matched emitter for thermophotovoltaic energy conversion10.1016/S0921-5107(00)00795-9 ↗
15. High-temperature stability and selective thermal emission of polycrystalline tantalum photonic crystals10.1364/OE.21.011482 ↗
16. High-efficiency thermophotovoltaic energy conversion enabled by a metamaterial selective emitter10.1364/OPTICA.5.000213 ↗
17. Optical coatings for thermophotovoltaic spectral control10.1364/AO.45.001356 ↗
18. Practical emitters for thermophotovoltaics: a review10.1117/1.JPE.9.032713 ↗
19. A nanophotonic solar thermophotovoltaic device10.1038/nnano.2013.286 ↗
20. Near-perfect photon utilization in an air-bridge thermophotovoltaic cell10.1038/s41586-020-2717-7 ↗
21. Pumping liquid metal at high temperatures up to 1,673 Kelvin10.1038/nature24054 ↗
22. Steady state analysis of a storage integrated solar thermophotovoltaic (SISTPV) system10.1016/j.solener.2013.07.002 ↗
23. Novel thin film thermophotovoltaic system10.1016/j.solmat.2010.01.024 ↗
24. Recombination lifetime of In0.53Ga0.47As as a function of doping density10.1063/1.121669 ↗
25. Performance of InxGa1-XAsyP1-y photodiodes with dark current limited by diffusion, generation recombination, and tunneling10.1109/JQE.1981.1071060 ↗
26. InGaAs--InP avalanche photodiodes with dark current limited by generation-recombination10.1364/OE.19.008546 ↗
27. Shockley-Read-Hall lifetime in homoepitaxial p-GaN extracted from recombination current in GaN p-N+ junction diodes10.7567/1347-4065/ab07ad ↗
28. The recombination parameter J010.1016/j.egypro.2014.08.073 ↗
29. Optical and crystallographic properties and impurity incorporation of Ga (x) in (1-x) as(with x between 0. 44 and 0. 49) grown by liquid phase epitaxy, vapor phase epitaxy, and metal organic chemical vapor deposition10.1063/1.332655 ↗
30. MESH: a free electromagnetic solver for far-field and near-field radiative heat transfer for layered periodic structures10.1016/j.cpc.2018.04.032 ↗
31. Thermal dependence of the refractive index of GaAs and AlAs measured using semiconductor multilayer optical cavities10.1063/1.114204 ↗
32. Temperature dependence of the refractive index in semiconductors10.1364/JOSAB.7.000918 ↗
33. Present efficiencies and future opportunities in thermophotovoltaics10.1016/j.joule.2020.06.021 ↗
34. Detailed balance limit of efficiency of P-n junction solar cells10.1063/1.1736034 ↗
35. Thermophotovoltaic energy conversion: materials and device engineering
36. A thermal model for the design of photovoltaic devices
37. Degradation of multicrystalline silicon solar cells and modules after illumination at elevated temperature10.1016/j.solmat.2015.06.015 ↗
38. Assessment of uncertainties and variations in PV modules degradation rates and lifetime predictions using physical models10.1016/j.solener.2021.01.071 ↗
39. Physics of the temperature coefficients of solar cells10.1016/j.solmat.2015.03.025 ↗
40. Temperature behaviour of different photovoltaic systems installed in Cyprus and Germany10.1016/j.solmat.2008.12.024 ↗
41. Temperature dependence of solar cell performance - an analysis10.1016/j.solmat.2012.02.019 ↗
42. Temperature-dependent GaSb material parameters for reliable thermophotovoltaic cell modelling10.1088/0268-1242/19/8/015 ↗
43. Wang · 2015 · vol. 106
44. Chapter 454 - the application of computational fluid dynamics to predict the performance of phase change materials for control of photovoltaic cell temperature in buildings
45. Cooling concentrator photovoltaic systems using various configurations of phase-change material heat sinks10.1016/j.enconman.2017.12.077 ↗
46. Optimization of finned solar photovoltaic phase change material (finned pv pcm) system10.1016/j.ijthermalsci.2018.04.033 ↗
47. Numerical investigation on using of nanofluid in a water-cooled photovoltaic thermal system10.1016/j.enconman.2016.05.083 ↗
48. Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM10.1016/j.solener.2018.11.016 ↗
49. Numerical investigation of micro-channel based active module cooling for solar CPV system10.1016/j.egypro.2014.07.283 ↗
50. A novel multi-layer manifold microchannel cooling system for concentrating photovoltaic cells10.1016/j.enconman.2014.09.046 ↗