journal article·2021-09

Facile in-situ fabrication of latent heat enhanced cellulose aerogel-based form-stable composite phase change materials based on dopamine modification strategy

Heng Wang, Yong Deng, Fuzhong Wu, Huixin Jin, Yilin Liu, Jinlong Zheng

Publisher page

Abstract

Abstract In this work, the latent heat enhanced polyethylene glycol (PEG)/cellulose aerogel (CA)-dopamine form-stable composite phase change materials (PCD fs-CPCMs) were constructed by facile in-situ fabrication method based on the freeze casting. Under the simultaneous synergistic effect of CA and dopamine modification, the PCD fs-CPCMs achieved ultra-high encapsulation capacity of ~95 wt% and latent heat of ~194.3 J/g. Furtherly, compared with before the dopamine modification, the latent heat of PCD fs-CPCMs was increased by ~18.9%, and the difference between theoretical and experimental value was significantly reduced, indicating that the modification effectively promoted phase change behavior and improved heat storage characteristic of PEG. The ultra-high encapsulation capacity was mainly attributed to the lightweight and porous characteristic of CA and the effective entanglement and combination of PEG molecular chain. The increased latent heat was mainly ascribed to the construction of new combination approaches among PEG, CA and dopamine, resulting in the weakening of hydrogen bond effect (before and after modification: O-H⋯O > O-H⋯N or N-H⋯O) so that the confinement effect of surfaces was weakened and modified surface-induced phase change behavior was promoted. Moreover, the PCD fs-CPCMs exhibited excellent chemical compatibility, reasonable heat storage and release rates, and acceptable thermal reliability and stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar-Powered Water Purification Methods · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
2. Properties of concretes enhanced with phase change materials for building applications10.1016/j.enbuild.2019.07.014 ↗
3. Thermal analysis and heat capacity study of polyethylene glycol (PEG) phase change materials for thermal energy storage applications10.1016/j.jct.2018.08.031 ↗
4. Review on phase change materials for cold thermal energy storage applications10.1016/j.rser.2020.110340 ↗
5. Review of solid-liquid phase change materials and their encapsulation technologies10.1016/j.rser.2015.04.044 ↗
6. Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage-A review10.1016/j.apenergy.2018.11.017 ↗
7. Shape-stabilized phase change materials based on porous supports for thermal energy storage applications10.1016/j.cej.2018.09.013 ↗
8. A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage10.1016/j.rser.2020.110127 ↗
9. Nanoencapsulation of phase change materials for advanced thermal energy storage systems10.1039/C8CS00099A ↗
10. Nanoconfined phase change materials for thermal energy applications10.1039/C7EE03587J ↗
11. Nanoconfinement effects on thermal properties of nanoporous shape-stabilized composite PCMs: a review10.1016/j.nanoen.2018.09.007 ↗
12. Thermodynamics behavior of phase change latent heat materials in micro-/nanoconfined spaces for thermal storage and applications10.1016/j.rser.2017.08.080 ↗
13. Functionalized mesoporous silica as matrix for shape-stabilized phase change materials10.1016/j.ijheatmasstransfer.2019.118699 ↗
14. Dopamine functionalization for improving crystallization behaviour of polyethylene glycol in shape-stable phase change material with silica fume as the matrix10.1016/j.jclepro.2018.10.207 ↗
15. Effects of acid leaching and organic intercalation on the thermophysical properties of paraffin/expanded vermiculite composite phase change materials10.1016/j.clay.2020.105754 ↗
16. Modified mesoporous silica filled with PEG as a shape-stabilized phase change materials for improved thermal energy storage performance10.1016/j.micromeso.2019.109756 ↗
17. Surface functionalization engineering driven crystallization behavior of polyethylene glycol confined in mesoporous silica for shape-stabilized phase change materials10.1016/j.nanoen.2015.11.001 ↗
18. Synthesis and characterization of polyethylene glycol/modified attapulgite form-stable composite phase change material for thermal energy storage10.1016/j.solener.2020.05.064 ↗
19. A promising form-stable phase change material composed of C/SiO2 aerogel and palmitic acid with large latent heat as short-term thermal insulation10.1016/j.energy.2020.118478 ↗
20. A phase change material encapsulated in a mechanically strong graphene aerogel with high thermal conductivity and excellent shape stability10.1016/j.compscitech.2020.108010 ↗
21. MXene aerogel-based phase change materials toward solar energy conversion10.1016/j.solmat.2019.110229 ↗
22. Review on clay mineral-based form-stable phase change materials: preparation, characterization and applications10.1016/j.rser.2016.10.014 ↗
23. Phase change materials and carbon nanostructures for thermal energy storage: a literature review10.1016/j.rser.2017.05.093 ↗
24. Review on nanostructure supporting material strategies in shape-stabilized phase change materials10.1016/j.est.2020.101299 ↗
25. Photodriven shape-stabilized phase change materials with optimized thermal conductivity by tailoring the microstructure of hierarchically ordered hybrid porous scaffolds10.1021/acssuschemeng.8b00565 ↗
26. Highly efficient thermo- and sunlight-driven energy storage for thermo-electric energy harvesting using sustainable nanocellulose-derived carbon aerogels embedded phase change materials10.1021/acssuschemeng.9b05015 ↗
27. A shape-stable phase change composite prepared from cellulose nanofiber/polypyrrole/polyethylene glycol for electric-thermal energy conversion and storage10.1016/j.cej.2020.125950 ↗
28. Facile fabrication of shape-stabilized polyethylene glycol/cellulose nanocrystal phase change materials based on thiol-ene click chemistry and solvent exchange10.1016/j.cej.2020.125206 ↗
29. Freeze casting: from low-dimensional building blocks to aligned porous structures-A review of novel materials, methods, and applications10.1002/adma.201907176 ↗
30. Hydrophilic modification of expanded graphite to develop form-stable composite phase change material based on modified CaCl2·6H2O10.1016/j.energy.2019.116473 ↗
31. Boron nitride-nanosheet enhanced cellulose nanofiber aerogel with excellent thermal management properties10.1016/j.carbpol.2020.116425 ↗
32. Construction of functional cellulose aerogels via atmospheric drying chemically cross-linked and solvent exchanged cellulose nanofibrils10.1016/j.cej.2019.02.111 ↗
33. Polyethylene glycol based self-luminous phase change materials for both thermal and light energy storage10.1016/j.energy.2019.116802 ↗
34. Processing solid wood into a composite phase change material for thermal energy storage by introducing silica-stabilized polyethylene glycol10.1016/j.compositesa.2020.106098 ↗
35. Analysis of porous structures of cellulose aerogel monoliths and microparticles10.1016/j.micromeso.2020.110625 ↗
36. Kaolinite nanotube-stearic acid composite as a form-stable phase change material for thermal energy storage10.1016/j.clay.2020.105930 ↗
37. Phase change behaviors of PEG on modified graphene oxide mediated by surface functional groups10.1016/j.eurpolymj.2015.10.027 ↗
38. Novel PEG/EP form-stable phase change materials with high thermal conductivity enhanced by 3D ceramics network10.1016/j.ceramint.2020.06.321 ↗
39. Study on a PEG/epoxy shape-stabilized phase change material: preparation, thermal properties and thermal storage performance10.1016/j.ijheatmasstransfer.2018.05.153 ↗
40. Polyethylene glycol-enwrapped silicon carbide nanowires network/expanded vermiculite composite phase change materials: form stabilization, thermal energy storage behavior and thermal conductivity enhancement10.1016/j.solmat.2017.09.013 ↗
41. Using mesoporous carbon to pack polyethylene glycol as a shape-stabilized phase change material with excellent energy storage capacity and thermal conductivity10.1016/j.micromeso.2020.110631 ↗
42. Novel network structural PEG/PAA/SiO2 composite phase change materials with strong shape stability for storing thermal energy10.1016/j.solmat.2020.110678 ↗
43. Novel light-driven CF/PEG/SiO2 composite phase change materials with high thermal conductivity10.1016/j.solmat.2017.09.045 ↗
44. Honeycomb-like structured biological porous carbon encapsulating PEG: a shape-stable phase change material with enhanced thermal conductivity for thermal energy storage10.1016/j.enbuild.2017.10.078 ↗
45. Crosslinked polymer networks of poly(ethylene glycol) (PEG) and hydroxyl terminated poly(dimethyl siloxane) (HTPDMS) as polymeric phase change material for thermal energy storage10.1016/j.solener.2019.01.091 ↗
46. Shape-stabilized poly(ethylene glycol) (PEG)-cellulose acetate blend preparation with superior PEG loading via microwave-assisted blending10.1016/j.solener.2016.12.056 ↗
47. Role of hydrogen bonding in phase change materials10.1021/acs.cgd.9b01541 ↗
48. Integration of pore confinement and hydrogen-bond influence on the crystallization behavior of C18 PCMs in mesoporous silica for form-stable phase change materials10.1021/acssuschemeng.7b03267 ↗
49. Design of phase change materials with carbon aerogel composite for multi-responsive thermal energy capture and storage10.1039/D0TA09035B ↗
50. Biomass-based shape-stabilized phase change materials from artificially cultured ship-shaped diatom frustules with high enthalpy for thermal energy storage10.1016/j.compositesb.2020.108500 ↗
51. Lightweight mesoporous carbon fibers with interconnected graphitic walls for supports of form-stable phase change materials with enhanced thermal conductivity10.1016/j.solmat.2019.110361 ↗
52. Form-stable phase change materials with enhanced thermal stability and fire resistance via the incorporation of phosphorus and silicon10.1016/j.matdes.2018.10.020 ↗