Atomic layer deposition of Zn(O,S) buffer layers for Cu(In,Ga)Se2 solar cells with KF post-deposition treatment
Source abstract
Abstract
We investigate the possibility to combine Zn(O,S) buffer layers grown by atomic layer deposition (ALD) with KF post-deposition treated Cu(In,Ga)Se 2 (CIGS-KF) in solar cells. It is shown that the beneficial effect on open-circuit voltage from the post-deposition treatment is essentially independent of buffer layer material. However, a wet-chemical surface treatment is required prior to ALD in order to achieve competitive fill factor values. A water rinse is sufficient to create an absorber surface similar to the one formed during a conventional CdS chemical bath deposition process. However, it is observed that CIGS-KF/Zn(O,S) devices made with water-rinsed absorbers systematically result in lower fill factor values than for the corresponding CIGS-KF/CdS references. This effect can be mitigated by decreasing the H 2S:H 2O precursor ratio during ALD initiation, indicating that the fill factor limitation is linked to the initial Zn(O,S) growth on the modified CIGS-KF surface. The best CIGS-KF/Zn(O,S) devices were fabricated by etching away the KF-modified surface layer prior to ALD, followed by a low-temperature anneal. The thermal treatment step is needed to increase the open-circuit voltage close to the value of the CdS devices. The results presented in this contribution indicate that the main beneficial effects from KF-PDT in our devices are neither associated with the CdS CBD process nor due to the formation of a K-In-Se rich phase on the CIGS surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Solar Frontier Press Release (17 December 2017), Solar Frontier Achieves World Record Thin-Film Solar Cell Efficiency of 22.9%. 〈http://www.solar-frontier.com/eng/news/2017/1220_press.html〉 (Accessed 17 Januari 2018), 2017.
3. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
4. Investigation of the potassium fluoride post deposition treatment on the CIGSe/CdS interface using hard X-ray photoemission spectroscopy – a comparative study10.1039/C6CP00260A ↗
5. Enhanced performance in Cu(In,Ga)Se2 solar cells fabricated by the two-step selenization process with a potassium fluoride postdeposition treatment10.1109/JPHOTOV.2014.2354259 ↗
6. Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride10.1002/pssr.201307238 ↗
7. Revealing surface modifications of potassium-fluoride-treated Cu(In,Ga)Se2: a study of material structure, chemistry, and photovoltaic performance10.1002/admi.201600013 ↗
8. In situ and ex situ investigations of KF postdeposition treatment effects on CIGS solar cells10.1109/JPHOTOV.2016.2637659 ↗
9. Alkali-templated surface nanopatterning of chalcogenide thin films: a novel approach toward solar cells with enhanced efficiency10.1021/acs.nanolett.5b00584 ↗
10. Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto sodalime glass substrates10.1016/j.solmat.2016.06.023 ↗
11. Investigation of the effect of potassium on Cu(In,Ga)Se2 layers and solar cells10.1016/j.tsf.2014.10.088 ↗
12. Experimental indication for band gap widening of chalcopyrite solar cell absorbers after potassium fluoride treatment10.1063/1.4892882 ↗
13. Anion displacements and the band-gap anomaly in ternary ABC2 chalcopyrite semiconductors10.1103/PhysRevB.27.5176 ↗
14. Alternative to KF postdeposition treatment in high-efficiency Cu(In,Ga)Se2 thin film solar cells10.1109/JPHOTOV.2016.2589365 ↗
15. R. Kamada, T.Yagioka, S.Adachi, A.Handa, K.F.Tai, T.Kato, H.Sugimoto, New world record Cu(In,Ga)(Se,S)2 thin film solar cell efficiency beyond 22%, in: IEEE, 2016, pp. 1287–1291. 〈http://dx.doi.org/10.1109/PVSC.2016.7749822〉.10.1109/PVSC.2016.7749822 ↗
16. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
17. Deposition temperature induced conduction band changes in zinc tin oxide buffer layers for Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2015.09.048 ↗
18. Inline Cu(In,Ga)Se2 co-evaporation for high-efficiency solar cells and modules10.1109/JPHOTOV.2013.2256232 ↗
19. Effect of KF absorber treatment on the functionality of different transparent conductive oxide layers in CIGSe solar cells
20. Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se2 based thin film solar cells: band alignment and sulfur gradient10.1063/1.2222067 ↗
21. High resolution XPS studies of Se chemistry of a Cu(In,Ga)Se2 surface10.1016/S0169-4332(02)00186-1 ↗
22. Enhanced efficiency of Cd-free Cu(In,Ga)(Se,S)2 minimodule via (Zn,Mg)O second buffer layer and alkali metal post-treatment10.1109/JPHOTOV.2017.2745710 ↗
23. On the CdS/CuInSe2 conduction band discontinuity10.1063/1.115523 ↗
24. Atomic layer deposition of Zn(O,S) alloys using diethylzinc with H2O and H2S: effect of exchange reactions10.1021/acs.jpcc.7b05361 ↗
25. Strong valence-band offset bowing of ZnO1−xSx enhances p-type nitrogen doping of ZnO-like alloys10.1103/PhysRevLett.97.146403 ↗
26. Experimental investigation of Cu(In1−x,Gax)Se2/Zn(O1−z,Sz) solar cell performance10.1016/j.solmat.2010.09.009 ↗
27. Na-diffusion enhanced p-type conductivity in Cu(In,Ga)Se2: a new mechanism for efficient doping in semiconductors10.1002/aenm.201601191 ↗
28. Effect of the KF post-deposition treatment on grain boundary properties in Cu(In,Ga)Se2 thin films10.1038/srep41361 ↗