journal article·2016-12

Efficient up-scaling of organic solar cells

Nikhil Agrawal, Mohd. Zubair Ansari, Amitava Majumdar, Radha Gahlot, Neeraj Khare

Publisher page

Abstract

Abstract Here we present efficient upscaling of organic solar cell (OSC) to an active area of ~50.4 cm2 from 0.09 cm2 using spin coating technique from solution processing. The Solar cell consists of ITO/ZnO/Absorber layer (PBDTTT-C:PC71BM)/MoO3/Ag layer and ZnO and absorber layer were coated through spin coating. A mechanical patterning machine was introduced in the fabrication process to make monolithic integrated module for any practical application. All the small area device and module were fabricated and tested in similar conditions. The OSC module (area ~50.4 cm2) shows an active area efficiency of 5.4% which is slightly lower than the efficiency (7.3%) of small area OSC (0.09 cm2). The open circuit voltage of module shows only ~4% drop whereas the current density shows a drop of ~8% while upscaling to an active area by >500 times. This reported monolithic integrated OSC module performance is due to uniform film thickness with low roughness values at center as well as corner positions obtained by spin coating technique. This demonstrates that spin coating process is suitable for upscaling of organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
2. Flexible, highly efficient all-polymer solar cells10.1038/ncomms9547 ↗
3. 7.7% efficient all-polymer solar cells10.1002/adma.201501604 ↗
4. Ternary blend polymer solar cells with enhanced power conversion efficiency10.1038/nphoton.2014.172 ↗
5. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
6. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
7. Area-scaling of organic solar cells10.1063/1.3211850 ↗
8. Efficient, large area ITO-and-PEDOT-free organic solar cell sub-modules10.1002/adma.201104896 ↗
9. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
10. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
11. Scalability of multi-junction organic solar cells for large area organic solar modules10.1063/1.4921771 ↗
12. Reduction of collection efficiency of charge carriers with increasing cell size in polymer bulk heterojunction solar cells10.1002/adfm.201001578 ↗
13. High efficiency fully inkjet printed organic solar cells with freedom of design10.1039/C5TA00540J ↗
14. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
15. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
16. A complete process for production of flexible large area polymer solar cells entirely using screen printing -first public demonstration10.1016/j.solmat.2008.12.001 ↗
17. Large-area organic photovoltaic module fabrication and performance10.1016/j.solmat.2008.11.018 ↗
18. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
19. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
20. Integrated organic photovoltaic modules with a scalable voltage output10.1063/1.2402264 ↗
21. Large area organic solar cells by accelerated blade coating10.1016/j.orgel.2015.03.001 ↗
22. Highly efficient, large area, roll coated flexible and rigid OPV modules with geometric fill factors up to 98.5% processed with commercially available materials10.1039/C5EE03315B ↗
23. Designs and architectures for the next generation of organic solar cells10.3390/en3061212 ↗
24. Origin of size effect on efficiency of organic photovoltaics10.1063/1.3567930 ↗
25. Size effect on organic optoelectronics devices: example of photovoltaic cell efficiency10.1016/j.physleta.2007.09.068 ↗
26. Efficiency enhancement in organic photovoltaic cells: consequences of optimizing series resistance10.1002/adfm.200901107 ↗
27. Efficient polymer solar cell modules10.1016/j.synthmet.2009.10.015 ↗
28. 6 Studies of spin-coated polymer films10.1039/b408857n ↗
29. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗
30. Understanding the role of thickness and morphology of the constituent layers on the performance of inverted organic solar cells10.1016/j.solmat.2013.03.027 ↗
31. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗