journal article·2014-09

The stability of normal vs. inverted organic solar cells under highly damp conditions: Comparison with the same interfacial layers

Donggeon Han, Seunghyup Yoo

Publisher page

Abstract

Abstract The stability of normal and inverted organic solar cells is investigated under a highly damp condition (90% relative humidity) in air. For fair comparison, both cells are fabricated not only with the same active layers but also with the same interfacial and electrode layers. The experimental results indicate that the inverted cells do outlive the normal cells and that the top electrode/interfacial layer is a vulnerable component that affects the life time most significantly. Furthermore, inverted cells are shown to have a degradation trend that differs significantly from that of the normal cells: the former have a voltage-dominant degradation due to the change in the work function of the metal oxide-based anodic interfacial layers; and the latter have a current-dominant degradation associated with the formation of bubble-like features. Based on the causes of degradation, methods for avoiding or delaying the observed degradations are proposed and tested for each type of cells. 28 (1.4) fold enhancement in T80-lifetime is achieved for inverted (normal) cells with the proposed method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Heliatek, 〈http://www.heliatek.com/〉 (Accessed February 2014).
2. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
3. The photo-stability of polymer solar cells: contact photo-degradation and the benefits of interfacial layers10.1002/adfm.201202567 ↗
4. Degradation of a thin Ag layer induced by poly(3,4-ethylenedioxythiophene): polystyrene sulfonate in a transmission electron microscopy specimen of an inverted polymer solar cell10.1021/am301818z ↗
5. Organic solar cells using inverted layer sequence10.1016/j.tsf.2005.06.006 ↗
6. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
7. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
8. High-efficiency polymer solar cells with a cost-effective quinoxaline polymer through nanoscale morphology control induced by practical processing additives10.1039/c3ee00110e ↗
9. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
10. D. Leinberger, 2006, 〈http://www.ista.org/forms/LEINBERGER_Dimensions06_paper.pdf〉
11. Light-soaking issue in polymer solar cells: photoinduced energy level alignment at the sol–gel processed metal oxide and indium tin oxide interface10.1063/1.4728173 ↗
12. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
13. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
14. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
15. Intensity-dependent equivalent circuit parameters of organic solar cells based on pentacene and C 6010.1063/1.1895473 ↗
16. Physicochemical mechanism for the continuous reaction of γ-Al2O3-modified aluminum powder with water10.1111/j.1551-2916.2007.01546.x ↗
17. Effect of Al(OH)3 on the hydrogen generation of aluminum–water system10.1016/j.jpowsour.2012.06.077 ↗
18. W.-Z. Gai, C.-S. Fang, Z.-Y. Deng, Hydrogen generation by the reaction of Al with water using oxides as catalysts, Int. J. Energy Res., doi:10.1002/er.3093.10.1002/er.3093 ↗
19. Hydrogen generation by means of the aluminum/water reaction10.2514/3.48127 ↗
20. Water vapor and oxygen degradation mechanisms in organic light emitting diodes10.1002/1616-3028(200104)11:2<116::AID-ADFM116>3.0.CO;2-B ↗
21. Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion test10.1016/j.solmat.2013.10.023 ↗
22. TiO2 nanoparticles with increased surface hydroxyl groups and their improved photocatalytic activity10.1016/j.catcom.2011.12.028 ↗
23. Analysis of surface OH groups on TiO2 single crystal with polarization modulation infrared external reflection spectroscopy10.1021/jp903426s ↗
24. Surface states of ZnO nanoparticles effect on the performance of inverted-organic solar cells10.1063/1.4821219 ↗
25. Simulation of light intensity dependent current characteristics of polymer solar cells10.1063/1.1646435 ↗
26. O. Synooka, K.-R. Eberhardt, C.R. Singh, F. Hermann, G. Ecke, B. Ecker, E. Hauff, G. Gobsch, H. Hoppe, Influence of thermal annealing on PCDTBT:PCBM composition profiles, Adv. Energy Mater., doi:10.1002/aenm.201300981.10.1002/aenm.201300981 ↗
27. Air processed organic photovoltaic devices incorporating a MoOx anode buffer layer10.1063/1.4804294 ↗