A novel non-selective coating material for solar thermal potential application formed by reaction between sol–gel titania and copper manganese spinel
Source abstract
Abstract
Abstract A method for preparing a novel bixbyite non-selective coating for solar thermal conversion is described. The coating is formed by a thermal reaction between a titania sol–gel precursor with a copper manganese spinel to form a new material, Cu 0.44 Ti 0.44 Mn 0.84 Fe 0.28 O 3 , with a bixbyite structure. The effect of temperature and ratio between the two components on the formation of the bixbyite layer (deposited on Inconel by spray-coating) was studied. The absorptance of the films (AM 1.5; 335–2500 nm) with a thickness of 10±2 µm after annealing at 2 h at 650 °C and 750 °C was 97.4% and 94.7%, respectively. This synthesis represents a novel approach in which the final solar thermal coating is formed as a continuous and uniform layer which combines both the absorber and the ceramic binder. The developed material shows promising results for future applications as absorber in solar thermal energy conversion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. IEA, Technology Roadmap-Concentrating Solar Power. 〈http:/www.iea.org/publications/freepublications/publication/name,3903,en.html〉, 2010.
2. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
3. Fabrication and optimisation of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
4. Pulsed magnetron sputter technology10.1016/0257-8972(93)90248-M ↗
5. Materials for photothermal solar-energy conversion10.1007/BF00700767 ↗
6. C.E. Kennedy, Review of Mid- to High-Temperature Solar Selective Absorber Materials, National Renewable Energy Laboratory 1617 Cole Blvd. Golden, CO 80401-3393, NREL/TP-520-31267, 2002.
7. Spectrally selective surfaces for photothermal conversion of solar-energy10.1002/pssa.2210600102 ↗
8. Characterisation of high-temperature-resistant spectrally selective paints for solar absorbers10.1016/S0927-0248(98)00181-0 ↗
9. Characterization of black nickel solar absorber coatings electroplated in a nickel chlorine aqueous solution10.1016/S0927-0248(98)00113-5 ↗
10. Adhesion and thermal stability of thickness insensitive spectrally selective (TISS) polyurethane-based paint coatings on copper substrates10.1016/j.solmat.2008.12.026 ↗
11. Life expectancy prediction and application properties of novel polyurethane based thickness sensitive and thickness insensitive spectrally selective paint coatings for solar absorbers10.1016/j.solmat.2011.05.014 ↗
12. T.N.L. Andrea Ambrosini, Chad L. Staiger, Aaron C. Hall, Marlene, Bencomo, Ellen B. Stechel, Improved High Temperature Solar Absorbers for use in Concentrating Solar Power Central Receiver Applications, Sandia National Laboratories, Albuquerque, New Mexico 87185 and Livermore, California 94550, 2010.
13. Durability tests of solution-chemically derived spectrally selective absorbers10.1016/j.solmat.2005.01.014 ↗
14. Coatings for enhanced photothermal energy collection
15. Raman spectroscopy study of phase transformations in titania-containing lithium aluminosilicate glasses doped with CoO10.1016/j.jnoncrysol.2005.07.019 ↗
16. Titania-supported cobalt and cobalt–phosphorus catalysts: characterization and performances in ethane oxidative dehydrogenation10.1006/jcat.2001.3262 ↗
17. Effect of mixed titania–alumina supports on the phase-composition of nimo/TiO2–Al2O3 catalysts10.1016/0926-860X(95)00006-2 ↗
18. From ZnO colloids to nanocrystalline colored ZnxTiyOw−zNz spinel films10.1002/adma.200400031 ↗
19. Direct formation of new, phase-stable, and photoactive anatase-type Ti1−2XNbXScXO2 solid solution nanoparticles by hydrothermal method10.1016/j.materresbull.2007.08.027 ↗
20. A study of Mn–Ti oxide powders and their behaviour in propane oxidation catalysis10.1039/a803994a ↗
21. Transparent, high strain point spinel glass-ceramics10.1016/S0022-3093(99)00368-3 ↗
22. Optical characterization and modeling of black pigments used in thickness-sensitive solar-selective absorbing paints10.1016/S0038-092X(01)00016-0 ↗
23. Hierarchically porous rutile titania: Harnessing spontaneous compositional change in mixed-metal oxides10.1021/cm0621693 ↗
24. Solar absorber coatings based on CoCuMnOx spinels prepared via the sol–gel process: structural and optical properties10.1016/S0927-0248(02)00457-9 ↗
25. Chemical modification of alkoxide precursors10.1016/0022-3093(88)90007-5 ↗
26. C.a.H.F.-E.i.t.S. Emil Bedi, 〈http:/energysavingnow.com/〉, 2000.
27. Zachariasen · Ueber die Kristallstruktur von Bixbyit, sowie vom kuenstlichen Mn2O3, Zeitschrift Fur Kristallographie · 1928 · 455
28. Structure change of Mn2O3 under high pressure and pressure-induced transition10.1524/zkri.2005.220.11_2005.938 ↗
29. Ab initio characterization of the mechanical and electronic properties of beta-SiAlON (Si6−zAlzOzN8−z; z=0–5)10.1103/PhysRevB.71.104105 ↗
30. Substituted copper titanates with bixbyite structure – the compounds of Cu1−XTi1−XFe2xO3 (0.15 Less-than-or-equal-to X Less-than-or-equal-to 0.33)10.1016/0022-4596(85)90167-7 ↗
31. Ordered Solid-solution with a bixbyite structure - the compounds Cu2+XTi2−XFe2−XSbxO9(O-Less-than-or-equal-to-X-Less-than-or-equal-to-1.4)10.1016/0025-5408(87)90300-X ↗
32. Structural properties study of the magneto-dielectric composite: Cr0.75Fe1.25O3 (CRFO):Fe0.5Cu0.75Ti0.75O3(FCTO)10.1016/j.jallcom.2009.03.002 ↗
33. Fe/Mn Oxide Catalysts for Fischer-Tropsch Synthesis: Part 5
34. Wagner · 1979