journal article·2011-09

How to design dye-sensitized solar cell modules

Yi-Duo Zhang, Xiao-Ming Huang, Kui-Yi Gao, Yue-Yong Yang, Yan-Hong Luo, Dong-Mei Li, Qing-Bo Meng

Publisher page

Abstract

Abstract A precise numerical model based on Kirchhoff's laws is used in investigating dye-sensitized solar cell (DSC) modules. As the I–V curve of a small DSC is obtained, the performances of DSC modules with any geometrical character can be exactly simulated by this model. By simulation, we find that the poor synchronization of work status in each cell is the main cause of low efficiency of large area module besides the Joule losses in the resistances. The optimized geometry parameters of the DSC module are mainly influenced by the manufacturing technique rather than the performance of the small cell. Simulation shows that the large area DSC module with aperture area efficiency of 10.57% can be produced based on the small cell with efficiency of 11.1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · solar cell performance optimization · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Light and energy—dye solar cells for the 21st century10.1016/j.jphotochem.2004.01.027 ↗
3. New interdigital design for large area dye solar modules using a lead-free glass frit sealing10.1002/pip.700 ↗
4. A glass frit-sealed dye solar cell module with integrated series connections10.1016/j.solmat.2005.09.003 ↗
5. Theoretical modeling of the series resistance effect on dye-sensitized solar cell performance10.1063/1.3270532 ↗
6. Dye-sensitized photovoltaic module with conversion efficiency of 8.4%10.1143/APEX.2.082202 ↗
7. Degradation analysis of dye-sensitized solar cell module after long-term stability test under outdoor working condition10.1016/j.solmat.2008.10.022 ↗
8. Efficient dye-sensitized solar cell sub-modules10.1016/j.cap.2009.11.004 ↗
9. Design of DSC panel with efficiency more than 6%10.1016/j.solmat.2004.10.001 ↗
10. Solar cell efficiency tables (version 36)10.1002/pip.1021 ↗
11. Theoretical models for the action spectrum and the current–voltage characteristics of microporous semiconductor films in photoelectrochemical cells10.1021/j100072a023 ↗
12. An electrical model of the dye-sensitized solar cell10.1016/S0927-0248(98)00005-1 ↗
13. Improvement of efficiency of dye-sensitized solar cells based on analysis of equivalent circuit10.1016/j.jphotochem.2006.04.030 ↗
14. A mathematical model for interfacial charge transfer at the semiconductor-dye-electrolyte interface of a dye-sensitised solar cell10.1016/j.solmat.2007.07.013 ↗
15. Modeling of dye-sensitized solar cells based on TiO2 electrode structure model10.1143/JJAP.49.04DP10 ↗
16. A detailed study of monolithic contacts and electrical losses in a large-area thin-film module10.1002/pip.589 ↗
17. Simulation of losses in thin-film silicon modules for different configurations and front contacts10.1002/pip.831 ↗
18. Effect of electrode geometry on the photovoltaic performance of dye-sensitized solar cells10.1016/j.solmat.2009.03.002 ↗
19. Hybrid tandem solar cell for concurrently converting light and heat energy with utilization of full solar spectrum10.1016/j.jpowsour.2010.05.033 ↗
20. Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%10.1016/j.tsf.2007.05.090 ↗
21. A new figure of merit for qualifying the fluorine-doped tin oxide glass used in dye-sensitized solar cells10.1063/1.3278518 ↗
22. Dye-sensitized solar cells with conversion efficiency of 11.1%10.1143/JJAP.45.L638 ↗
23. Integrated dye-sensitized solar cell module with conversion efficiency of 8.2%10.1063/1.3054160 ↗