journal article·2014-04

Post-treatment effects on ZnS(O,OH)/Cu(In,Ga)Se2 solar cells deposited using thioacetamide-ammonia based solution

Taizo Kobayashi, Toyokazu Kumazawa, Zacharie Jehl Li Kao, Tokio Nakada

Publisher page

Abstract

Abstract The impact of post-treatments such as annealing, light-soaking and heat-light soaking on film properties and cell performance of ZnS(O,OH)/Cu(In,Ga)Se2 solar cells were investigated, when ZnS(O,OH) buffer layer was deposited using a thioacetamide (TAA)-ammonia based chemical solution. Chemical bath deposition (CBD) time was shortened to one seventh by combination of a thinner buffer layer and TAA-ammonia based high-rate CBD, as compared to conventional thiourea (TU)-ammonia based CBD process. The ZnO:B window layer was deposited by metal organic chemical vapor deposition (MOCVD) in order to avoid plasma-damage during subsequent sputtering process. An optimum CIGS solar cell fabricated using 50 nm-thick ZnS(O,OH) buffer layer yielded a total area efficiency of 18.8% after heat-light soaking treatment for 80 min at 130 °C under AM1.5, 100 mW/cm2 illumination. The influence of post-treatments on the compositional changes of the ZnS(O,OH) buffer layer, which affect the conduction band offset(CBO) at the CIGS/ZnS(O,OH) interface, are also discussed on the basis of X-ray photoelectron spectroscopy(XPS) analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
2. M. A. Contreras, T. Nakada, M. Hongo, A. O. Pudov, J. R. Sites, ZnO/ZnS(O,OH)/Cu(In,Ga)Se2/Mo solar cell with 18.6% efficiency, in: Proceedings of the 3rd World Conf. Photovolt. Energy Convers 2003; 1: 570-573.
3. M. Powalla, D. Hariskos, P. Jackson, F. Kessler, S. Paetel, W. Wischmann, W. Witte, R. Würz, CIGS solar cells with efficiencies>20%:current status and new developments, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, 2011, pp. 2416–2420.
4. D. Hariskos, R. Menner, P. Jackson, S. Paete, W. Witte, W. Wischmann, M. Powalla, L. Bürkert, T. Kolb, M. Oertel, B. Fimmler B. Fuchs, New reaction kinetics for a high-rate chemical bath deposition of the Zn(S,O) buffer layer for Cu(In,Ga)Se2-based solar cells. Progress in Photovoltaics: Research and Applications 2012; online published, doi10.1002/pip.1244.10.1002/pip.1244 ↗
5. M. Nakamura, Y. Chiba, S. Kijima, K. Horiguchi, Y. Yanagisawa, Y. Sawai, K. Ishikawa and H. Hakuma, Achievement of 17.5% efficiency with 30×30cm2-sized Cu(In,Ga)(Se,S)2 submodules, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference, 2012, pp. 1807–1810.10.1109/PVSC.2012.6317944 ↗
6. M. Nakamura, K. Yamaguchi, Y. Chiba, H. Hakuma, T. Kobayashi T. Nakada, Achievement of 19.7% efficiency with a small-sized Cu(InGa)(SeS)2 solar cells prepared by sulfurization after selenization process with Zn-based buffer, Proceedings of 39th IEEE Photovoltaic Specialists Conference 2013.10.1109/PVSC.2013.6744278 ↗
7. 18% efficiency Cd-free Cu(In,Ga)Se2 thin-film solar cells fabricated using CBD-ZnS buffer layers10.1143/JJAP.41.L165 ↗
8. Comparison in cell performance of ZnS(O,OH)/CIGS solar cells using MOCVD-ZnO:B and Sputter-deposited ZnO:Al window layers10.1109/JPHOTOV.2013.2249556 ↗
9. U. Zimmermann, M. Ruth, M. Edoff, Cadmium-free CIGS min-modules with ALD-grown Zn(O, S)-based buffer layers, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 2006, pp. 1831–1834.
10. Experimental investigation of Cu(In1−x,Gax)Se2/Zn(O1−z,Sz) solar cell performance10.1016/j.solmat.2010.09.009 ↗
11. C. Platzer-Björkman and A. Uhl, Comparison of ZnS-based Buffer Layers by Chemical Bath Deposition and Atomic Layer Deposition, MRS Proceedings 1165 (2007) M05-02. DOI: 10.1557/PROC-1165-M05-02.10.1557/PROC-1165-M05-02 ↗
12. Wide-gap Cu(In,Ga)Se2 solar cells with Zn(O,S) buffer layers prepared by atomic layer deposition
13. Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se2 based thin film solar cells: band alignment and sulfur gradient10.1063/1.2222067 ↗
14. Cu(In,Ga)Se2 Thin Film Solar Cells with a combined ALD-Zn(O,S) Buffer and MOCVD-ZnO:B Window Layers10.1016/j.solmat.2013.05.052 ↗
15. Stabilization of PN heterojunction between Cu(InGa)Se2 thin-film absorber and ZnO window with Zn(O, S, OH)x buffer10.1143/JJAP.39.2577 ↗
16. Transparent conducting ZnO:B thin films by UV-assisted MOCVD using TEB for Cu(In,Ga)Se2 solar cells10.7567/JJAP.51.10NC09 ↗
17. Efficient Cu(In,Ga)Se2 thin film solar cells with reduced thickness of ZnS(O,OH) buffer layer10.1016/j.solmat.2013.07.026 ↗
18. T. Kobayashi, H. Yamaguchi, and T. Nakada, Effects of combined heat and light-soaking on device performance of Cu(In,Ga)Se2 solar cells with ZnS(O,OH) buffer layer, Progress in Photovoltaics: Research and Applications. 10.1002/pip.233910.1002/pip.2339 ↗
19. Impacts of post-treatments on cell performance of CIGS solar cells with Zn-compound buffer layers10.1109/JPHOTOV.2012.2223456 ↗
20. T. Nakada, M. Mizutani, Improved efficiency of Cu(In,Ga)Se2 thin film solar cells with chemically deposited ZnS buffer layers by air-annealing -formation of homojunction by solid phase diffusion-, Proceedings of 28th IEEE Photovoltaic Specialists Conference, 2000.
21. Hamakawa · 2003 · 93
22. Effect of UV irradiation on evaporated ZnS films10.1364/AO.19.002480 ↗
23. Zn coordination chemistry: development of benchmark, suites for geometries, dipole moments, and bond dissociation energies and their use to test and validate density functionals and molecular orbital theory10.1021/ct700205n ↗
24. N. Terada, A. Kirihara, T. Takahae, Y. Shiota, S. Niki, S. Ishizuka, H. Shibata, A. Yamada, K. Matsubara, Characterization of band alignment at buffer/absorber interfaces and grain boundaries in CIGS-based solar cells, in: Proceedings of the Technical digest of the 21st International Photovoltaic and Science and Engineering Conference (PVSEC-21), 2011, Fukuoka.
25. Interface engineering in chalcopyrite thin film solar devices10.1016/j.solmat.2005.10.012 ↗