journal article·2014-05

Bismuth-ion doped Cu(In,Ga)Se2 thin films: Preparation, microstructures, and electrical properties

Fu-Shan Chen, Jeng-Shin Ma, Jen-Cheng Sung, Chung-Hsin Lu

Publisher page

Abstract

Abstract The influence of doping with bismuth ions in the properties of synthesized Cu(In,Ga)Se 2 films was investigated via the solution coating process followed by a selenization step. The incorporation of bismuth ions in Cu(In,Ga)Se 2 significantly increased the size of the grains in the obtained films. The intermediate compound of bismuth copper oxide was thought to react with selenium vapor to form copper bismuth selenide, which acted as a flux agent at elevated temperatures. The low-temperature photoluminescence spectra of bismuth-containing Cu(In,Ga)Se 2 films revealed attenuated intensity of the peak that was attributed to the donor–acceptor pair transition following the incorporation of bismuth. The donor–acceptor transition is caused by the selenium deficiency. Doping with bismuth ions reduced the amounts of the selenium deficiencies in the films. The incorporation of bismuth ions increased the open-circuit voltage and the fill factor of solar cells by increasing the carrier concentration and reducing the resistivity. The efficiency of solar cells increased from 4.37 to 6.29% as bismuth-ion doping f was increased from 0 to 1.0 mol%, revealing that the properties of Cu(In,Ga)Se 2 absorber layers were effectively improved via the addition of bismuth ions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Amorphous silicon solar-cell10.1063/1.88617 ↗
2. Material and solar cell research in microcrystalline silicon10.1016/S0927-0248(02)00448-8 ↗
3. Thin-film CdS/CdTe solar-cell with 15.8-percent efficiency10.1063/1.109629 ↗
4. Preparation of Cu(In,Ga)Se2 films via direct heating the selenium-containing precursors without selenization10.1016/j.ceramint.2012.03.031 ↗
5. Synthesis of CuInSe2 films via selenizing the Cu–In alloy-containing nanopowders10.1016/j.jallcom.2011.11.105 ↗
6. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
7. A 21.5% efficient Cu(In,Ga)Se2 thin-film concentrator solar cell10.1002/pip.424 ↗
8. Microstructural characterization of high-efficiency Cu(In,Ga)Se2 solar cells10.1016/S0927-0248(97)00201-8 ↗
9. Fundamental studies on large area Cu(In,Ga)Se2 films for high efficiency solar cells10.1016/S0927-0248(01)00076-9 ↗
10. Controlling growth chemistry and morphology of single-bath electrodeposited Cu(In,Ga)Se2 thin films for photovoltaic application10.1149/1.2186764 ↗
11. Interface formation between CuIn1−xGaxSe2 absorber and In2S3 buffer layer deposited by ultrasonic spray pyrolysis10.1016/j.tsf.2011.01.370 ↗
12. A high-efficiency solution-deposited thin-film photovoltaic device10.1002/adma.200800555 ↗
13. High efficiency low temperature grown Cu(In,Ga)Se2 thin film solar cells on flexible substrates using NaF precursor layers10.1002/pip.1064 ↗
14. CuIn1−xGaxSe2 growth process modifications: influences on microstructure, Na distribution, and device properties10.1016/j.solmat.2011.01.003 ↗
15. Antimony assisted low-temperature processing of CuIn1−xGaxSe2−ySy solar cells10.1016/j.tsf.2010.08.135 ↗
16. Optimization of CIGS-based PV device through antimony doping10.1021/cm903428f ↗
17. T. Nakda, Y. Honishi, Y. Yatsushiro, H. Nakakoba, Impacts of Sb and Bi incorporations on CIGS thin films and solar cells, in: 37th IEEE Photovoltaic Specialists Conference (2011) 003527.10.1109/PVSC.2011.6186709 ↗
18. Effects of Bi incorporation on Cu(In1−x,Gax)Se2 thin films an solar cells
19. Non-vacuum deposition of Cu(In,Ga)Se2 absorber layers from binder free, alcohol solutions10.1002/pip.1246 ↗
20. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
21. Study on the electrical and optical properties of ITO and AZO thin film by oxygen gas flow rate10.1007/s10832-008-9452-z ↗
22. Phase correlations in the CuAlSe2–CuAlTe2 system10.1002/pssb.200440039 ↗
23. Photoluminescence properties of sodium incorporated in CuInSe2 thin films10.1143/JJAP.38.L289 ↗
24. M.A. Contreras, B. Egaas, P. Dippo, J. Webb, J. Granata, K. Ramanathan, S. Asher, A. Swartzlander, R. Noufi, On the role of Na and modifications to Cu(In,Ga)Se2 absorber materials using thin-MF (M=Na, K, Cs) Precursor Layers, in: 26th IEEE Photovoltaic Specialists Conference, Anatheim, California, (1997) 359–363.
25. Anti-site defects in n-BI2SE3 crystal10.1016/0022-3697(90)90017-A ↗
26. Photoluminescence properties of Cu(InGa)Se2 thin films prepared by mechanochemical process10.1143/JJAP.47.694 ↗