journal article·2012-06

Self-assembly supramolecules to enhance electrical conductivity of polyaniline for a flexible organic solar cells anode

Tae Hwan Lim, Kyung Wha Oh, Seong Hun Kim

Publisher page

Abstract

Abstract A high performance and cost effective polyaniline doped with camphorsulfonic acid (PANI:CSA) based thin film was prepared for a flexible electrode. A high crystalline structure was introduced to prevent the decreased orientation of PANI film to overcome a conductivity dropping with decreasing film thickness because of the recoiling of the polymer chains. An optimum structure is selected according to the various analyses such as self-assembled degree, crystallinity, and the blending properties with PANI. The additive, named self-assembly supramolecules (SAS), was successfully blended with PANI chains. PANI film blended with the most suitable SAS (PANI:CSA/SAS18) exhibited high conductivity of 843 S/cm and a high optical transparency of 86% at 550 nm that was thinner than 200 nm of film thickness. The flexible organic solar cells (OSCs) device adapted to our electrode shows a higher power conversion efficiency of 1.73% than a pristine PANI:CSA electrode at 0.40%. Furthermore, it was possible to induce long environmental stability under numerous device operating cycles since PANI:CSA/SAS18 had a lower acidity compared with the PEDOT:PSS conventional polymer electrode. The efficiency of our OSC device remains more than 90% after 500 h, while that of OSC device made of PEDOT:PSS decreased approximately 30% of their initial efficiency after 500 h. The PANI based OSCs electrode developed in this study has the potential for consideration as a novel polymer electrode in a flexible display.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
3. Indium tin oxide alternatives–high work function transparent conducting oxides as anodes for organic light-emitting diodes10.1002/1521-4095(200110)13:19<1476::AID-ADMA1476>3.0.CO;2-Y ↗
4. Efficient and flexible ito-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
5. Highly conductive and transparent thin films fabricated with predominantly semiconducting single-walled carbon nanotubes10.1016/j.carbon.2010.03.025 ↗
6. Polypyrrole/MWCNT-gr-PSSA composite for flexible and highly conductive transparent film10.1002/app.34507 ↗
7. Transparent, conductive graphene electrodes for dye-sensitized solar cells10.1021/nl072838r ↗
8. ITO-free low-cost organic solar cells with highly conductive poly(3,4 ethylenedioxythiophene): p-toluenes sulfonate anodes10.1016/j.solmat.2011.09.019 ↗
9. Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cels10.1039/b915756e ↗
10. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
11. Polymer photovoltaic cells with conducting polymer anodes10.1002/1521-4095(20020503)14:9<662::AID-ADMA662>3.0.CO;2-N ↗
12. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films10.1016/S0379-6779(02)01259-6 ↗
13. Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes10.1016/j.orgel.2009.06.019 ↗
14. Investigation on polymer anode design for flexible polymer solar cells10.1063/1.2945796 ↗
15. Characterizing joule heating in polymer light-emitting diodes using a scanning thermal microscope10.1002/adma.200306128 ↗
16. Progress in preparation, processing and applications of polyaniline10.1016/j.progpolymsci.2009.04.003 ↗
17. Metallic transport in polyaniline10.1038/nature04705 ↗
18. Transparent conductive-polymer strain sensors for touch input sheets of flexible displays10.1088/0960-1317/20/7/075017 ↗
19. Solution processable small molecules for organic light-emitting diodes10.1039/b926348a ↗
20. Novel film-casting method for high-performance flexible polymer electrodes10.1002/adfm.201000589 ↗
21. Orientation and conductivity in polyaniline: 110.1016/S0032-3861(97)85602-9 ↗
22. Doping dependent transport properties of polyaniline-CSA films10.1016/S0379-6779(96)04141-0 ↗
23. High-performance polyaniline prepared via polymerization in a self-stabilized dispersion10.1002/adfm.200400467 ↗
24. S.H. Lee, C.W. Lee, U.S. Patent 20080308771, December 18, 2008.
25. Transformation of framework solids into processable metallo-polymers10.1039/b916092b ↗
26. Enhanced electrical conductivity of self-assembled, layered molecular composites of metallo-backbone polymer and polyanline10.1002/adma.200390059 ↗
27. 13C CPMAS NMR, XRD, d.c. and a.c. electrical conductivity of aromatic acids doped polyaniline10.1016/0379-6779(96)80227-X ↗
28. Deanin · 1972
29. Cocrystallization behavior of poly(3-alkylthiophenes): influence of alkyl chain length and head to tail regioregularity10.1021/ma034702v ↗
30. Effect of the alkyl chain length of C70-PCBM acceptors on the device performance of P3HT: C70-PCBM polymer solar cells10.1039/C0JM02459G ↗
31. Dependence of transition temperatures and enthalpies of fusion and crystallization on composition in polyaniline/nylon blends10.1021/ma981935r ↗
32. Phase behavior of poly(3-alkylthiophene)/polystyrene blends10.1016/j.polymer.2009.08.012 ↗
33. 2.5% efficient organic plastic solar cells10.1063/1.1345834 ↗
34. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
35. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.solmat.2010.08.020 ↗
36. The OE-A OPV demonstrator anno domini 201110.1039/c1ee01891d ↗