journal article·2015-12

A facile preparation of ceramic coatings on Ti alloys for thermal protection systems

Zhongping Yao, Qixing Xia, Qiaoxiang Shen, Pengfei Ju, Peibo Su, Bing Hu, Zhaohua Jiang

Publisher page

Abstract

Abstract In order to reduce the effects of solar energy on the instruments and the apparatus in the outer space, two different kinds of ceramic coatings were prepared on Ti6Al4V alloys by plasma electrolytic oxidation (PEO) in zirconate electrolytes. The phase composition, microstructure, thickness, and roughness of coatings were examined by XRD, SEM, EDS, thickness measurement gauge, and roughness measuring instrument, respectively. The infrared emissivity and solar absorbance of the ceramic coatings were studied with the UV–vis–NIR spectrophotometer and infrared reflectometer. The results show that ZrO 2 coatings are dense and deep gray–green, and mainly composed of m -ZrO 2 , t -ZrO 2 . In addition, a small amount of TiO 2 , ZrTiO 4, and the amorphous compound containing P exists in the coating. The intrinsic solar absorbance and emissivity of ZrO 2 coatings are 0.92 and 0.76, respectively. The KZr 2 (PO 4 ) 3 coating is rough, thick, and white with the main crystalline of KZr 2 (PO 4 ) 3 . The intrinsic solar absorbance and emissivity of the KZr 2 (PO 4 ) 3 coating are 0.62 and 0.91, respectively. For both coatings, the absorbance decreases while the emissivity increases due to an increase in the real surface area of the coatings by increasing thickness and roughness of the coatings as the PEO time progresses. The porous structure of the KZr 2 (PO 4 ) 3 is proved to be ideal for high emissivity and low absorbance materials with the lowest solar absorbance (0.239), the highest infrared emissivity (0.99), and a corresponding balance temperature of the coating of 276 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Recent advances in direct solar thermal power generation10.1063/1.3212675 ↗
2. A review on solar energy use in industries10.1016/j.rser.2010.12.018 ↗
3. Sustainable solar energy conversion to chemical and electrical energy10.1016/j.rser.2013.07.006 ↗
4. Degradation of thermal control materials under a simulated radiative space environment10.1016/j.asr.2012.07.010 ↗
5. Surface engineering for thermal control of spacecraft10.1179/174329405X50118 ↗
6. Local heat transfer coefficient measurement through a visibly-transparent heater under jet-impingement cooling10.1016/j.ijheatmasstransfer.2012.06.029 ↗
7. Research of painting-type La1−xSrxMnO3 smart thermal control coating10.3724/SP.J.1077.2012.00245 ↗
8. C.K. Reed, J. Wright, P. Carlin. Plasma sprayed ultra high purity alumina based thermal control coatings, Mater Process Afford Keys Future, 43, 1998, pp.1502–1509.
9. Emissivity of La1−xSrxMnO3/acrylic resin thermal control coating
10. Fabrication and characterization of composite sol–gel coatings on porous ceramic substrate10.1016/j.jeurceramsoc.2011.03.002 ↗
11. Mechanical behavior of black anodic films on 7175 aluminium alloy for space applications10.1016/j.surfcoat.2009.06.026 ↗
12. Gap-filling of Cu–Al alloy into nanotrenches by cyclic metalorganic chemical vapor deposition10.1016/j.materresbull.2012.04.107 ↗
13. Characterization and temperature controlling property of TiAlN coatings deposited by reactive magnetron co-sputtering10.1016/j.jallcom.2008.04.083 ↗
14. Relation between the plasma characteristics and physical properties of functional zinc oxide thin film prepared by radio frequency magnetron sputtering process10.1016/j.tsf.2009.07.181 ↗
15. Optical, mechanical and surface properties of amorphous carbonaceous thin films obtained by plasma enhanced chemical vapor deposition and plasma immersion ion implantation and deposition10.1016/j.apsusc.2013.05.013 ↗
16. Growth process of plasma electrolytic oxidation films formed on magnesium alloy AZ91D in silicate solution10.1016/j.electacta.2007.02.021 ↗
17. Electrolytic-plasma oxidation in borate electrolytes10.1134/S0033173206010103 ↗
18. Characterization of the plasma electrolytic oxidation of titanium in sodium metasilicate10.1016/j.apsusc.2012.10.183 ↗
19. Growth characteristics of plasma electrolytic oxidation ceramic coatings on Ti–6Al–4V alloy10.1016/j.apsusc.2007.12.062 ↗
20. Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti–6Al–4V alloy10.1016/S0257-8972(00)00719-2 ↗
21. Studies on white anodizing on aluminum alloy for space applications10.1016/S0169-4332(99)00290-1 ↗
22. Preparation of high emissivity and low absorbance thermal control coatings on Ti alloys by plasma electrolytic oxidation10.1016/j.surfcoat.2014.01.034 ↗
23. Thermal control coatings on magnesium alloys prepared by plasma electrolytic oxidation10.1016/j.apsusc.2013.04.115 ↗
24. Effect of Fe3+ ions on the thermal and optical properties of the ceramic coating grown in-situ on AZ31 Mg alloy10.1016/j.matchemphys.2012.04.015 ↗
25. High emissivity coatings on titanium alloy prepared by micro-arc oxidation for high temperature application10.1007/s10853-011-6017-3 ↗