Thermal properties of 1-hexadecanol/high density polyethylene/graphene nanoplates composites as form-stable heat storage materials
Source abstract
Abstract
Composite phase change materials (CPCM) composed of 1-hexadecanol (HD), high density polyethylene (HDPE) and graphene nanoplates (GNP) were synthesized in this work. HD served as phase change material, while HDPE acted as support frame. GNP was introduced to improve thermal conductivity. A number of tests were conducted to acquire physical performances of the CPCM. The chemical components of the materials were obtained from Fourier transformation infrared spectroscope (FT-IR). The crystal structure was illustrated by X-ray diffractometer (XRD). The microcosmic pattern was observed form scanning electronic microscope (SEM). Phase transition characters were analyzed from the data of differential scanning calorimeter (DSC). Thermal stability was shown by thermogravimetric analyzer (TGA). Thermal conductivity of CPCM3 was 1.86 times of HD/HDPE composites (PCM2). The GNP significantly enhanced the thermal conductivity. The latent heat and chemical structure were stable after the thermal cycling experiment. Hence, the CPCM3 is a reliable material in heat storage applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Research frontiers in sustainable development of energy, water and environment systems in a time of climate crisis10.1016/j.enconman.2019.111938 ↗
2. A step to clean energy-Sustainability in energy system management in an emerging economy context10.1016/j.jclepro.2019.118462 ↗
3. Renewable energy for whom? A global systematic review of the environmental justice implications of renewable energy technologies10.1016/j.erss.2020.101837 ↗
4. Review on sensible thermal energy storage for industrial solar applications and sustainability aspects10.1016/j.solener.2020.08.081 ↗
5. Geothermal-solar integrated groundwater desalination system: current status and future perspective10.1016/j.gsd.2020.100506 ↗
6. A review on thermal energy storage using phase change materials in passive building applications10.1016/j.jobe.2020.101563 ↗
7. Properties of concretes enhanced with phase change materials for building applications10.1016/j.enbuild.2019.07.014 ↗
8. Thermophysical properties and applications of nano-enhanced PCMs: an update review10.1016/j.enconman.2020.112876 ↗
9. A review on current status and challenges of inorganic phase change materials for thermal energy storage systems10.1016/j.rser.2016.12.012 ↗
10. Synthesis of organic phase change materials (PCM) for energy storage applications: a review10.1016/j.nanoso.2019.100399 ↗
11. Review on form-stable inorganic hydrated salt phase change materials: preparation, characterization and effect on the thermophysical properties10.1016/j.apenergy.2021.116845 ↗
12. Experimental study of carbon fiber reinforced alkali-activated slag composites with micro-encapsulated PCM for energy storage10.1016/j.conbuildmat.2017.11.075 ↗
13. Thermal energy storage properties and thermal reliability of some fatty acid esters/building material composites as novel form-stable PCMs10.1016/j.solmat.2012.02.026 ↗
14. Enhancement of heat transfer in paraffin wax PCM using nano graphene composite for industrial helmets10.1016/j.est.2019.100982 ↗
15. Stability of sugar alcohols as PCM for thermal energy storage10.1016/j.solmat.2014.03.020 ↗
16. Thermal characteristic reliability of fatty acid binary mixtures as phase change materials (PCMs) for thermal energy storage applications10.1016/j.applthermaleng.2015.01.047 ↗
17. Shape-stabilized phase change materials based on porous supports for thermal energy storage applications10.1016/j.cej.2018.09.013 ↗
18. MnCeOx/diatomite catalyst for persulfate activation to degrade organic pollutants10.1016/j.jes.2019.09.020 ↗
19. Polypyrrole–Gold nanocomposites. Templateless synthesis and electrochemical properties10.1016/j.electacta.2019.134585 ↗
20. Experimental study on the thermal performance of capric acid-myristyl alcohol/expanded perlite composite phase change materials for thermal energy storage10.1016/j.solener.2019.09.049 ↗
21. The thermal conductivity, viscosity, and cloud points of bentonite nanofluids with n-pentadecane as the base fluid10.1016/j.molliq.2019.112307 ↗
22. High density polyethylene film toughened with polypropylene and linear low density polyethylene10.1016/j.matlet.2019.126689 ↗
23. Fabrication of bilayered attapulgite for solar steam generation with high conversion efficiency10.1016/j.cej.2018.12.157 ↗
24. Preparation of Fenofibrate loaded Eudragit L100 nanoparticles by nanoprecipitation method10.1016/j.matpr.2019.03.176 ↗
25. A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage10.1016/j.rser.2020.110127 ↗
26. Transient phase change heat transfer in a metal foam-phase change material heatsink subject to a pulse heat flux10.1016/j.est.2020.101701 ↗
27. Enhanced thermal properties of stearic acid/carbonized maize straw composite phase change material for thermal energy storage in buildings10.1016/j.est.2021.102420 ↗
28. Experimental investigation of thermal conductivity enhancement of carbon foam saturated with PCM and PCM/MWCNTs composite for energy storage systems10.1007/s00231-019-02610-4 ↗
29. High-density polyethylene as phase-change material: long-term stability and aging10.1016/j.polymertesting.2019.04.009 ↗
30. M. Tamil Selvi, A.K. Dasarathy and S. Ponkumar Ilango, Mechanical properties on light weight aggregate concrete using high density polyethylene granules, Mater. Today Proc.s, https://doi.org/10.1016/j.matpr.2021.04.302.10.1016/j.matpr.2021.04.302 ↗
31. The experimental exploration of carbon nanofiber and carbon nanotube additives on thermal behavior of phase change materials10.1016/j.solmat.2011.01.021 ↗
32. Thermophysical properties and applications of nano-enhanced PCMs: an update review10.1016/j.enconman.2020.112876 ↗
33. Improving the heat storage/release rate and photo-thermal conversion performance of an organic PCM/expanded graphite composite block10.1016/j.solmat.2019.110081 ↗
34. Thermal properties of stearic acid/active aluminum oxide/graphene nanoplates composite phase change materials for heat storage10.1016/j.matchemphys.2021.124747 ↗
35. A review on thermal energy storage using composite phase change materials10.2174/2212797611666181009153110 ↗
36. Heat transfer performance of graphene nano-platelets laden microencapsulated PCM with polymer shell for thermal energy storage based heat sink10.1016/j.applthermaleng.2019.04.072 ↗
37. Preparation, thermal characterization and examination of phase change materials (PCMs) enhanced by carbon-based nanoparticles for solar thermal energy storage10.1016/j.est.2019.100874 ↗
38. PCM based heat sinks of paraffin/nanoplatelet graphite composite for thermal management of IGBT10.1016/j.applthermaleng.2016.11.010 ↗
39. Nature of the rotational phase transition in paraffin Crystals10.1063/1.1670315 ↗
40. Synthesis and physical properties of normal higher primary alcohols. IV. Thermal and X-ray studies on the polymorphism of the alcohols of even carbon numbers from dodecanol to tetratriacontanol10.1246/bcsj.34.1728 ↗
41. Enthalpies of phase change and heat capacities of some long–chain alcohols: adiabatic semimicrocalorimeter for studies of polymorphism10.1016/0021-9614(74)90009-3 ↗
42. Differential thermal analysis of n-long chain alcohols and corresponding alkoxy ethanols10.1016/0040-6031(79)80008-8 ↗
43. Improved thermal properties of stearic acid/high density polyethylene/carbon fiber composite heat storage materials10.1016/j.solmat.2020.110782 ↗
44. Comprehensive evaluation of Paraffin-HDPE shape stabilized PCM with hybrid carbon nano-additives10.1016/j.applthermaleng.2019.114404 ↗
45. Preparation and properties studies of halogen-free flame retardant form-stable phase change materials based on paraffin/high density polyethylene composites10.1016/j.apenergy.2007.10.017 ↗
46. Preparations and thermal properties of micro- and nano-BN dispersed HDPE composites10.1016/j.tca.2009.10.013 ↗
47. Thermal properties of phase-change materials based on high-density polyethylene filled with micro-encapsulated paraffin wax for thermal energy storage10.1016/j.enbuild.2014.11.061 ↗
48. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage10.1016/j.solmat.2008.11.057 ↗
49. Synthesis and thermal properties of the MA/HDPE composites with nano-additives as form-stable PCM with improved thermal conductivity10.1016/j.apenergy.2016.07.106 ↗
50. One-step preparation of form-stable phase change material through self-assembly of fatty acid and graphene10.1021/acs.jpcc.5b06089 ↗
51. Preparation of capric acid/halloysite nanotube composite as form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.05.024 ↗