journal article·2021-09

Fabrication of inverted pyramid structure for high-efficiency silicon solar cells using metal assisted chemical etching method with CuSO4 etchant

Danni Zhang, Shuai Jiang, Ke Tao, Rui Jia, Huayun Ge, Xinpu Li, Bolong Wang, Minghui Li, Zhuoyu Ji, Zhibo Gao, Zhi Jin

Publisher page

Abstract

Abstract Inverted pyramid texture is used to improve the performance of single crystalline silicon (sc-Si) solar cell due to its excellent light-trapping properties. In this paper, inverted pyramid structures are fabricated on large area sc-Si wafers by metal assisted chemical etching method using CuSO4 instead of Cu(NO3)2. Three groups of solar cells were fabricated with textured structures prepared by CuSO4, Cu(NO3)2 and NaOH respectively. The surface microstructure, average reflectivity, surface recombination and auger recombination, internal quantum efficiency and external quantum efficiency of the sc-Si solar cells were studied in detail. The results show that CuSO4 can prepare uniform inverted pyramid structures on silicon substrate by reducing the generation of bubbles and promoting the deposition copper nano-particles on the surface of sc-Si wafer, and thus improve the properties of solar cells. More importantly, the chemical reaction mechanism for etching silicon wafer with CuSO4 and Cu(NO3)2 during the texturing process was compared and analyzed. Finally, the average efficiency of large-area sc-Si PERC solar cells fabricated by CuSO4 was 22.63%, which was 0.60% absolutely higher than that of Cu(NO3)2, and 1.56% higher than normal pyramid group.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. An 18.9% efficient black silicon solar cell achieved through control of pretreatment of Ag/Cu MACE10.1007/s10854-019-01189-0 ↗
2. High-efficiency multi-crystalline black silicon solar cells achieved by additive assisted Ag-MACE10.1016/j.solener.2019.11.045 ↗
3. The influence of Ag-ion concentration on the performance of mc-Si silicon solar cells textured by metal assisted chemical etching (MACE) method
4. The influence of black silicon morphology modification by acid etching to the properties of diamond wire sawn multicrystalline silicon solar cells10.1109/JPHOTOV.2018.2829085 ↗
5. The influence of surface structure on diffusion and passivation in multicrystalline silicon solar cells textured by metal assisted chemical etching (MACE) method10.1016/j.solmat.2018.06.011 ↗
6. Development of additive-assisted Ag-MACE for multicrystalline black Si solar cells10.1016/j.elecom.2020.106686 ↗
7. Improvement of saw damage removal to fabricate uniform black silicon nanostructure on large-area multi-crystalline silicon wafers10.1016/j.solener.2020.03.072 ↗
8. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
9. P-Type versus n-Type silicon wafers:prospects for high-efficiency commercial silicon solar cells10.1109/TED.2006.878026 ↗
10. The influence of surface structure on diffusion and passivation in multicrystalline silicon solar cells textured by metal assisted chemical etching (MACE) method10.1016/j.solmat.2018.06.011 ↗
11. Key technique for texturing a uniform pyramid structure with a layer of silicon nitride on monocrystalline silicon wafer10.1016/j.apsusc.2012.12.001 ↗
12. Improved anisotropic etching process for industrial texturing of silicon solar cells10.1016/S0927-0248(98)00180-9 ↗
13. Refined nano-textured surface coupled with SiNx layer on the improved photovoltaic properties of multi-crystalline silicon solar cells10.1016/j.sse.2013.03.002 ↗
14. Concurrent improvement in optical and electrical characteristics by using inverted pyramidal array structures toward efficient Si heterojunction solar cells10.1016/j.nanoen.2016.02.034 ↗
15. Light trapping properties of pyramidally textured surfaces10.1063/1.339189 ↗
16. 18.88%-efficient multi-crystalline silicon solar cells by combining Cu-catalyzed chemical etching and post-treatment process10.1016/j.solener.2018.04.049 ↗
17. Optical reflectance and transmission of a textured surfaced10.1016/0040-6090(77)90197-3 ↗
18. Ray tracing analysis of the inverted pyramid texturing geometry for high efficiency silicon solar cells10.1016/0927-0248(93)90090-P ↗
19. Effect of surface texturization on minority carrier lifetime and photovoltaic performance of monocrystalline silicon solar cell10.1016/j.ijleo.2018.09.042 ↗
20. Ultrafast laser direct hard-mask writing for high efficiency c-Si texture designs10.1051/epjpv/2013015 ↗
21. Inverted nanopyramid texturing for silicon solar cells using interference lithography10.1016/j.mee.2014.04.004 ↗
22. Monocrystalline-like silicon solar cells fabricated by wet and dry texturing processes for improving light-trapping effect10.1016/j.vacuum.2015.02.020 ↗
23. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
24. Fabrication of 20.19% efficient single-crystalline silicon solar cell with inverted pyramid microstructure
25. Maskless inverted pyramid texturization of silicon
26. Regulation of surface texturization through copper-assisted chemical etching for silicon solar cells10.1016/j.solener.2020.03.013 ↗
27. 18.87%-efficient inverted pyramid structured silicon solar cell by one-step Cu-assisted texturization technique10.1016/j.solmat.2017.03.017 ↗
28. Groundwater risk assessment model (GRAM): groundwater risk assessment model for wellfield protection10.3390/w5031419 ↗
29. High-efficiency multi-crystalline black silicon solar cells achieved by additive assisted Ag-MACE10.1016/j.solener.2019.11.045 ↗
30. Metal-assisted chemical etching of silicon in HF-H2O210.1016/j.electacta.2008.03.009 ↗
31. Tracking the sources of nitrate in groundwater using coupled nitrogen and boron isotopes:A synthesis10.1021/es0493897 ↗
32. Evaluation of sources and fate of nitrates in the western Po plain groundwater (Italy) using nitrogen and boron isotopes10.1007/s11356-017-0792-6 ↗
33. Groundwater Risk Assessment Model (GRAM): groundwater risk assessment model for wellfield protection10.3390/w5031419 ↗
34. Removal of sulfate from high-strength wastewater by crystallisation10.1016/j.watres.2008.11.008 ↗
35. High-efficiency multi-crystalline black silicon solar cells achieved by additive assisted Ag-MACE10.1016/j.solener.2019.11.045 ↗
36. Porous silicon templates prepared by Cu-assisted chemical etching10.1016/j.matlet.2013.12.093 ↗