Stable magnesium zinc oxide by reactive Co-Sputtering for CdTe-based solar cells
Source abstract
Abstract
Abstract Magnesium zinc oxide (MZO) is a promising front contact material for CdTe solar cells. Due to its higher band gap than traditional CdS, MZO can reduce parasitic absorption to significantly increase short-circuit current density while also providing a benefit of conduction band offset tuning through Mg:Zn ratio optimization. MZO has been successfully implemented into CdTe devices, however its stability has been of concern. The MZO stability issue has been attributed to the presence of oxygen in the CdTe device processing ambient, leading to double-diode behavior (S-kink) in the current density-voltage curves. Here we report on MZO thin films deposited by reactive co-sputtering. The reactively co-sputtered MZO thin films have encouraging stability, show no significant variation in work function of the surface over a period of 6 months, as measured by Kelvin probe. Energy conversion efficiencies of around 16% have been achieved both with and without presence of oxygen in device processing ambients across multiple research facilities. These efficiencies should be possible to increase further by tuning of the thin film deposition and device processing parameters, especially through optimization of the back contact.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. 2019
2. NREL Best Research-Cell Efficiencies
3. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
4. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
5. The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
6. CdTe solar cells with open-circuit voltage breaking the 1 V barrier10.1038/nenergy.2016.15 ↗
7. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
8. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
9. Recombination and bandgap engineering in CdSeTe/CdTe solar cells10.1063/1.5098459 ↗
10. Band alignment of front contact layers for high-efficiency CdTe solar cells10.1016/j.solmat.2016.05.050 ↗
11. Emitter/absorber interface of CdTe solar cells10.1063/1.4953820 ↗
12. Interface engineering for 25% CdTe solar cells10.1021/acsaem.8b01173 ↗
13. Sputter-deposited oxides for interface passivation of CdTe photovoltaics10.1109/JPHOTOV.2017.2787021 ↗
14. Degradation of Mg-doped zinc oxide buffer layers in thin film CdTe solar cells10.1016/j.tsf.2019.137556 ↗
15. Tailoring MgZnO/Cd(Se)Te interfaces for photovoltaics10.1109/JPHOTOV.2018.2877982 ↗
16. Eliminating S-kink to maximize the performance of MgZnO/CdTe solar cells10.1021/acsaem.9b00233 ↗
17. Rapid thermal annealing on ZnMgO window layer for improved performance of CdTe solar cells10.1016/j.solmat.2018.06.033 ↗
18. Characteristics of cubic MgZnO thin films grown by radio frequency reaction magnetron co-sputtering10.1016/j.jallcom.2009.06.088 ↗
19. Combinatorial laser molecular beam epitaxy (MBE) growth of Mg-Zn-O alloy for band gap engineering10.1143/JJAP.38.L603 ↗
20. Doping efficiency and limits in (Mg,Zn)O:Al,Ga thin films with two-dimensional lateral composition spread10.1002/pssa.201431932 ↗
21. Combinatorial sputtering of Ga-doped (Zn,Mg)O for contact applications in solar cells10.1016/j.solmat.2016.09.003 ↗
22. Combinatorial study of MZO emitters for CdTe-based solar cells
23. Single vacuum chamber with multiple close space sublimation sources to fabricate CdTe solar cells10.1116/1.4941071 ↗
24. Thermomechanical lift-off and recontacting of CdTe solar cells10.1021/acsami.8b16476 ↗
25. The effect of cadmium chloride treatment on close-spaced sublimated cadmium telluride thin-film solar cells10.1109/JPHOTOV.2013.2264995 ↗
26. Effects of CdCl2 treatment on the recrystallization and electro-optical properties of CdTe thin films10.1116/1.581269 ↗
27. Influence of CdTe deposition temperature and window thickness on CdTe grain size and lifetime after CdCl 2 recrystallization10.1109/JPHOTOV.2018.2790701 ↗
28. Obtaining large columnar CdTe grains and long lifetime on nanocrystalline CdSe, MgZnO, or CdS layers10.1002/aenm.201702666 ↗
29. Cadmium tin oxide and zinc magnesium oxide prepared by hollow cathode sputtering for CdTe photovoltaics
30. Influences of buffer material and fabrication atmosphere on the electrical properties of CdTe solar cells10.1002/pip.3192 ↗
31. Controlled activation of ZnTe:Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
32. The roles of ZnTe buffer layers on CdTe solar cell performance10.1016/j.solmat.2015.12.019 ↗
33. Copper-induced recrystallization and interdiffusion of CdTe/ZnTe thin films10.1116/1.5023501 ↗
34. Recrystallization and sulfur diffusion in CdCl2-treated CdTe/CdS thin films10.1002/(SICI)1099-159X(199707/08)5:4<249::AID-PIP178>3.0.CO;2-S ↗
35. Intermixing at the CdS/CdTe interface and its effect on device performance10.1557/PROC-426-361 ↗
36. Energy band alignment in chalcogenide thin film solar cells from photoelectron spectroscopy10.1088/0953-8984/27/13/134201 ↗
37. Numerical Modeling of CIGS and CdTe solar cells: setting the baseline
38. Work function determination of zinc oxide films10.1116/1.580502 ↗
39. ZnO Schottky barriers and Ohmic contacts10.1063/1.3581173 ↗
40. Oxygen vacancies: the origin of n-type conductivity in ZnO10.1103/PhysRevB.93.235305 ↗
41. Oxygen vacancies in ZnO10.1063/1.2053360 ↗
42. Indium oxide—a transparent, wide-band gap semiconductor for (opto)electronic applications10.1088/0268-1242/30/2/024001 ↗