Application of polycrystalline silicon carbide thin films as the passivating contacts for silicon solar cells
Source abstract
Abstract
Abstract In this paper, silicon rich polycrystalline silicon carbide (poly-SiCx) thin films were prepared for passivating contact of silicon solar cells. The effect of different carbon doping ratios R [methane flow (sccm)/silane flow (sccm)] and the annealing temperatures on the passivation quality was investigated. The lifetime test showed that, given a lower annealing temperature, the passivation quality of poly-SiCx thin films was very poor at R over 0.2, and it can be improved by elevating the annealing temperature. The effective lifetime of over 1.8 ms can be obtained with implied open-circuit voltages (iVoc) of 715 mV and saturated dark current (J0) of 18 fA/cm2. The microstructure and optical property of poly-SiCx films was studied by Raman spectra, X-ray photoelectron spectroscopy and UV-VIS spectrophotometer. The results showed that the incorporation of carbon lowered the crystalline fraction of poly-SiCx and a higher annealing temperature was needed to achieve high crystallinity. The optical band gap of poly-SiCx was widened with increase in R, and got up to 2.3eV when R was 0.4. A proof-of-concept top/rear TOPCon solar cells, featuring a N+-poly-SiCx (R = 0.2) front contact, was fabricated to demonstrate the potential of this SiCx passivation contact. The decrease in the parasitic absorption of light at the front side resulted in higher photogenerated current. And the conversion efficiency of 20.17% was achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Carbide Semiconductor Technologies · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Comprehensive analytical model for locally contacted rear surface passivated solar cells10.1063/1.3506706 ↗
2. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
3. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
4. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
5. Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cells10.1016/j.solmat.2016.06.040 ↗
6. N‐type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
7. Efficient carrier-selective p- and n- contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
8. Phosphorous-doped silicon carbide as front-side full-area passivating contact for double-side contacted c-Si solar cells10.1109/JPHOTOV.2018.2886234 ↗
9. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
10. The influence of the growth conditions on the structural and optical properties of hydrogenated amorphous silicon carbide thin films10.1016/S0925-8388(99)00206-6 ↗
11. Hydrogen evolution from a-Si: C:H and a-Si: Ge:H alloys10.1016/0022-3093(85)90795-1 ↗
12. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
13. Ultrathin silicon dioxide layers with a low leakage current density formed by chemical oxidation of Si10.1063/1.1517723 ↗
14. Defect characterization of a-SiC : H and a-SiN : H alloys produced by ultrahigh vacuum plasma enhanced chemical vapor deposition in different plasma conditions10.1016/S0921-4526(98)00408-6 ↗
15. Structure and properties of hydrogenated amorphous silicon carbide thin films deposited by PECVD10.1016/j.jnoncrysol.2006.11.047 ↗
16. Effects of carbon content and plasma power on room temperature photoluminescence characteristics of hydrogenated amorphous silicon carbide thin films deposited by PECVD10.1016/j.tsf.2017.05.041 ↗
17. Doping profile analysis in Si by electrochemical capacitance‐voltage measurements10.1149/1.2044101 ↗
18. The influence of methane flow rate on microstructure and surface morphology of a-SiC:H thin films prepared by plasma enhanced chemical vapor deposition technique10.1016/j.tsf.2016.12.027 ↗
19. Efficient carrier-selective p- and n- contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
20. Raman scattering from hydrogenated microcrystalline and amorphous silicon10.1088/0022-3719/15/2/019 ↗
21. Bimodal crystal size distribution in annealed rf magnetron silicon films: a memory effect of the local order inhomogeneities in the initial amorphous state10.1016/S0022-3093(98)00222-1 ↗
22. Experimental determination of the nanocrystalline volume fraction in silicon thin films from Raman spectroscopy10.1063/1.99054 ↗
23. Physics of amorphous silicon–carbon alloys10.1002/pssb.2221430202 ↗
24. Silicon carbide recovered from photovoltaic industry waste as photocatalysts for hydrogen production10.1016/j.jhazmat.2017.01.023 ↗
25. XPS studies of amorphous SiCN thin films prepared by nitrogen ion-assisted pulsed-laser deposition of SiC target10.1016/S0925-9635(01)00422-8 ↗
26. Silicon content influence on structure and photoluminescence properties of carbon rich hydrogenated amorphous silicon carbide thin films10.1016/j.jallcom.2018.04.226 ↗
27. Optical, structural and bonding properties of diamond-like amorphous carbon films deposited by DC magnetron sputtering10.1016/j.diamond.2015.04.004 ↗
28. The impact of indium tin oxide deposition and post annealing on the passivation property of TOPCon solar cells10.1016/j.solener.2018.10.034 ↗