Effects of KF and RbF post deposition treatments on the growth of the CdS buffer layer on CIGS thin films - a comparative study
Source abstract
Abstract
In this contribution we are analyzing and comparing the impact of two different alkali-fluorine post deposition treatments (KF and RbF) on the growth of chemical-bath-deposited CdS buffer layers on Cu(In,Ga)Se2 absorber layers for thin film solar cells. By combining Raman scattering, scanning electron microscopy, current-voltage analysis and measurements of the internal quantum efficiency we provide a comprehensive picture of this issue on the material and device level. We find that both PDTs lead to a better CdS-coverage of the surface of the CIGS, which leads to an improved junction quality at early growth stages compared to untreated devices. Furthermore the growth rate of the CdS is enhanced on KF-treated absorber layers while it is decreased on those treated with RbF (compared to the reference). This leads to a more stable behavior of RbF-treated devices after longer duration of the CdS deposition, while the KF-treated devices suffer from reduced fill factor and open circuit voltage. Furthermore we show that not only both PDTs but also the growth of the CdS lead to a reduction of the amount of the so called ordered defect compound, which is initially present at the surface of our absorber layers. This behavior indicates either the formation of CdCu -anti-sites or of a secondary phase at the interface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. Record efficiency for thin-film polycrystalline solar cells up to 22.9 % achieved by Cs-treated Cu(in,Ga)(Se,S)210.1109/JPHOTOV.2018.2882206 ↗
4. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
5. Experimental indication for band gap widening of chalcopyrite solar cell absorbers after potassium fluoride treatment10.1063/1.4892882 ↗
6. Alkali-templated surface nanopatterning of chalcogenide thin films: a novel approach toward solar cells with enhanced efficiency10.1021/acs.nanolett.5b00584 ↗
7. Potassium postdeposition treatment-induced band gap widening at Cu(in,Ga)Se2 surfaces - reason for performance leap?10.1021/acsami.5b09231 ↗
8. KF post deposition treatment in co-evaporated Cu(In,Ga)Se2 thin film solar cells: beneficial or detrimental effect induced by the absorber characteristics10.1002/pip.2924 ↗
9. Effects of rubidium fluoride and potassium fluoride post deposition treatments on Cu(In,Ga)Se2 thin films and solar cell performance10.1021/acs.chemmater.7b03412 ↗
10. Rubidium segregation at random grain boundaries in Cu(In,Ga)Se2 absorbers10.1016/j.nanoen.2017.10.063 ↗
11. Group III elemental composition dependence of RbF postdeposition treatment effects on Cu(in,Ga)Se2 thin films and solar cells10.1021/acs.jpcc.8b00079 ↗
12. Rubidium distribution at atomic scale in high efficient Cu(In,Ga)Se2 thin-film solar cells10.1063/1.5020805 ↗
13. Elucidating the mechanism of an RbF post deposition treatment in CIGS thin film solar cells10.1002/solr.201800156 ↗
14. Direct insights into RbInSe2 formation at Cu(In,Ga)Se2 thin film surface with RbF postdeposition treatment10.1063/1.5044244 ↗
15. Formation of the band gap energy on CdS thin flims growth by two different techniques10.1016/S0040-6090(01)00830-6 ↗
16. A closer look at initial CdS growth on high-efficiency Cu(in,Ga)Se2 absorbers using surface-sensitive methods
17. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
18. Recrystallization of CIGSe layers grown by three-step processes: a model based on grain boundary migration10.1016/j.actamat.2010.06.025 ↗
19. 7.6 % CZGSe solar cells thanks to optimized CdS chemical bath deposition10.1002/pssa.201800043 ↗
20. Fityk: a general-purpose peak fitting program10.1107/S0021889810030499 ↗
21. Structural properties of chalcopyrite thin films studied by Raman spectroscopy10.1002/pssb.200541132 ↗
22. Raman spectra of the ordered vacancy compounds CuIn3Se5 and CuGa3Se510.1063/1.121893 ↗
23. Study of annealing-induced changes in CdS thin films usin X-ray diffraction and Raman Spectroscopy10.1016/j.tsf.2007.04.160 ↗
24. Lincot · 1999 · 6 · 165
25. Chemical bath deposition of cadmium sulfide thin films. In situ growth and structural studies by combined quartz crystal microbalance and electrochemical impedance techniques10.1149/1.2069515 ↗
26. Formation of a K-In-Se surface species by NaF/KF post-deposition treatment of Cu(In,Ga)Se2 thin-film solar cell absorbers10.1021/acsami.6b11892 ↗
27. Characterization of grain boundaries in Cu(in,Ga)Se2 films using atom-probe tomography10.1109/JPHOTOV.2011.2170447 ↗
28. Effect of alkali metal atom doping on the CuInSe2-based solar cell absorber10.1021/acs.jpcc.7b03083 ↗
29. Properties of RbInSe2 thin films
30. In vacuo XPS investigation of Cu(In,Ga)Se2 surface after RbF post deposition treatement10.1016/j.tsf.2018.09.026 ↗
31. Coevaporated KInSe 2 : a fast alternative to KF postdeposition treatment in high-efficiency Cu(in,Ga)Se2 thin film solar cells10.1109/JPHOTOV.2016.2589365 ↗
32. High efficiency solar cell based on full PVD processed Cu(in,Ga)Se2/CdIn2S4 heterojunction
33. Investigation of the potassium fluoride post deposition treatment on the CIGSe/CdS interface using hard X-ray photoemission spectroscopy - a comparative study10.1039/C6CP00260A ↗
34. Chemical bath deposition of Zn(O,S) and CdS bbuffer: influence of Cu(In,Ga)Se2 grain orientation
35. Improved growth of solution-deposited thin films on polycrystalline Cu(In,Ga)Se210.1002/pssr.201510454 ↗