Tomography-based radiative transfer analysis of an open-cell foam made of semitransparent alumina ceramics
Source abstract
Abstract
Abstract This study aims to fully investigate the radiative characterization of ceramic foams in terms of local scale (single strut) and macro scale (foam sheet). A radiative transfer model was established in the limit of geometric optics for a porous structure obtained from real alumina ceramic foams by computed tomography technique. The model considers the reflection and refraction at solid-void interface and the volumetric transmission, absorption and scattering process inside semitransparent ceramic solids. It is found that at local scale, neglecting the real hollowness may bring considerable errors to the local radiative behavior of ceramic struts (maximum errors up to 20.4–39.3% for the cases investigated). The cross-sectional thickness of the strut increases from the middle to the extremities, which causes a significant variation of the local radiative behavior. At macro scale, a peak in transmittivity of foam sheet can be observed at the wavelength around 4.4 µm. The scattering albedos obtained from the predictive model indicate that alumina ceramic foams behave strongly scattering within the wavelength 4 µm but very absorbing over 6 µm. The asymmetry factors obtained show a turning point at the wavelength around 1.8 µm, suggesting a transition of the scattered radiation from backward predominance to forward predominance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Radiative Heat Transfer Studies · Advanced Image Fusion Techniques · Numerical methods in inverse problems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Radiative transfer in dispersed media10.1115/1.3152430 ↗
2. Thermal radiation properties of dispersed media: theoretical prediction and experimental characterization10.1016/S0022-4073(99)00234-4 ↗
3. Tubular Si-infiltrated SiCf/SiC composites for solar receiver application – Part 2: thermal performance analysis and prediction10.1016/j.solmat.2015.04.034 ↗
4. Thermophotovoltaic power generation systems using natural gas-fired radiant burners10.1016/j.solmat.2006.11.011 ↗
5. Thermochemical performance analysis of solar driven CO2 methane reforming10.1016/j.energy.2015.08.080 ↗
6. Heat transfer analysis of porous media receiver with different transport and thermophysical models using mixture as feeding gas10.1016/j.enconman.2014.03.068 ↗
7. Conductive and radiative heat transfer in ceramic and metal foams at fire temperatures10.1007/s10694-010-0167-8 ↗
8. Thermal conductive and radiative properties of solid foams: traditional and recent advanced modelling approaches10.1016/j.crhy.2014.09.002 ↗
9. Radiative properties modeling of open cell solid foam: review and new analytical law10.1016/j.ijthermalsci.2015.12.017 ↗
10. Discrete vs. continuum-scale simulation of radiative transfer in semitransparent two-phase media10.1016/j.jqsrt.2011.01.025 ↗
11. Pore-level numerical analysis of the infrared surface temperature of open-cell metallic foams10.1016/j.jqsrt.2017.06.004 ↗
12. Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube10.1016/j.energy.2016.08.013 ↗
13. Howell · 2011
14. Thermal radiation properties of highly porous cellular foams10.1615/SpecialTopicsRevPorousMedia.v4.i2.20 ↗
15. Review of heat transfer research for solar thermochemical applications10.1115/1.4024088 ↗
16. Analytical considerations of thermal radiation in cellular metal foams with open cells10.1016/j.ijheatmasstransfer.2007.10.010 ↗
17. The prediction of radiation heat transfer in open cell metal foams by a model based on the Lord Kelvin representation10.1016/j.ijheatmasstransfer.2014.04.058 ↗
18. Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications10.1016/j.apenergy.2009.08.009 ↗
19. Monte Carlo determination of radiative properties of metal foams: comparison between idealized and real cell structures10.1016/j.ijthermalsci.2014.08.006 ↗
20. Microscale direct calculation of solid phase conductivity of voronoi’s foams10.1615/JPorMedia.v16.i5.30 ↗
21. Computational prediction of radiative properties of polymer closed-cell foams with random structure10.1615/JPorMedia.v16.i2.50 ↗
22. Determining the specific surface area of ceramic foams: the tetrakaidecahedra model revisited10.1016/j.ces.2010.12.031 ↗
23. Statistical distribution of residence time and tortuosity of flow through open-cell foams10.1016/j.ces.2009.07.033 ↗
24. Metallic foams: radiative properties/comparison between different models10.1016/j.jqsrt.2007.05.007 ↗
25. Pore-level engineering of macroporous media for increased performance of solar-driven thermochemical fuel processing10.1016/j.ijheatmasstransfer.2014.07.020 ↗
26. Tomography-based multiscale analyses of the 3D geometrical morphology of reticulated porous ceramics10.1111/j.1551-2916.2008.02308.x ↗
27. Radiative properties of irregular open cell solid foams10.1016/j.ijthermalsci.2017.03.007 ↗
28. Geometrical modelling of foam structures using implicit functions10.1016/j.ijsolstr.2012.10.026 ↗
29. Effect of ligament hollowness on heat transfer characteristics of open-cell metal foam10.1016/j.ijheatmasstransfer.2016.06.068 ↗
30. Microstructure effects on thermal conductivity of open-cell foams generated from the Laguerre-Voronoï tessellation method10.1016/j.ijthermalsci.2015.07.016 ↗
31. Continuum radiative heat transfer modeling in media consisting of optically distinct components in the limit of geometrical optics10.1016/j.jqsrt.2010.06.022 ↗
32. Application of the spatial averaging theorem to radiative heat transfer in two-phase media10.1016/j.jqsrt.2009.08.001 ↗
33. Radiative characterization of random fibrous media with long cylindrical fibers: comparison of single- and multi-RTE approaches10.1016/j.jqsrt.2017.08.002 ↗
34. Homogeneous phase and multi-phase approaches for modeling radiative transfer in foams10.1016/j.ijthermalsci.2011.04.012 ↗
35. Homogenization of radiation transfer in two-phase media with irregular phase boundaries10.1103/PhysRevB.77.144201 ↗
36. Model of radiative heat transfer in heterogeneous multiphase media10.1103/PhysRevB.81.064202 ↗
37. Differential approximations to the radiation transfer equation by chapman-enskog expansion10.1115/1.4003724 ↗
38. The multiphase radiation transfer model for two-phase layered systems10.1016/j.jqsrt.2012.11.006 ↗
39. Integrated simulation of continuous-scale and discrete-scale radiative transfer in metal foams10.1016/j.jqsrt.2018.04.001 ↗
40. Analytical modelling of the radiative properties of metallic foams: contribution of X-Ray tomography10.1002/adem.200700334 ↗
41. Tomography-based analysis of apparent directional spectral emissivity of high-porosity nickel foams10.1016/j.ijheatmasstransfer.2017.11.005 ↗
42. Evolution of the homogenized volumetric radiative properties of a family of α-SiC foams with growing pore nominal diameter10.1615/JPorMedia.2015012283 ↗
43. Experimental characterization of thermal radiation properties of dispersed media10.1016/S1290-0729(02)01365-0 ↗
44. Identification of spectral radiative properties of polyurethane foam from hemispherical and bi-directional transmittance and reflectance measurements10.1016/S0022-4073(01)00199-6 ↗
45. Experimental and RDFI calculated radiative properties of a mullite foam10.1016/j.ijheatmasstransfer.2006.02.036 ↗
46. Radiative characteristics of opaque spherical particle beds10.2514/1.5082 ↗
47. Radiative characteristics of beds made of large spheres containing an absorbing and scattering medium10.1016/j.ijthermalsci.2005.03.009 ↗
48. Radiative transfer in dispersed media: comparison between homogeneous phase and multiphase approaches10.1115/1.4000237 ↗
49. Radiative properties of densely packed spheres in semitransparent media: a new geometric optics approach10.1016/j.jqsrt.2010.01.014 ↗
50. Investigations of the radiative properties of Al-NiP foams using tomographic images and stereoscopic micrographs10.1016/j.ijheatmasstransfer.2011.11.017 ↗
51. Modeling of the coupled conductive and radiative heat transfer in NiCrAl from photothermal measurements and X-ray tomography10.1615/SpecialTopicsRevPorousMedia.v2.i4.10 ↗
52. Tomography based pore-level optimization of radiative transfer in porous media10.1016/j.ijheatmasstransfer.2011.06.017 ↗
53. Identification of radiative properties of reticulated ceramic porous inert media using ray tracing technique10.1016/j.jqsrt.2012.05.017 ↗
54. 3D numerical modelling of the propagation of radiative intensity through a X-ray tomographied ligament10.1016/j.jqsrt.2017.03.006 ↗
55. Tomography-based heat and mass transfer characterization of reticulate porous ceramics for high-temperature processing10.1115/1.4000226 ↗
56. A line-by-line hybrid unstructured finite volume/Monte Carlo method for radiation transfer in 3D non-gray medium10.1016/j.jqsrt.2017.09.030 ↗
57. Difference of optical properties between porous alumina and sapphire using two-substrate method at elevated temperature10.1016/j.cap.2013.05.018 ↗
58. Direct simulation of the high temperature optical behavior of a porous medium based on a CT image10.1016/j.colsurfa.2006.12.038 ↗
59. Textural parameters influencing the radiative properties of a semitransparent porous media10.1016/j.ijthermalsci.2010.10.001 ↗
60. Modeling of heat transfer in low-density EPS foams10.1115/1.2188464 ↗
61. Radiative properties of expanded polystyrene foams10.1115/1.2994764 ↗
62. Numerical investigation of the radiative properties of polymeric foams from tomographic images10.2514/1.46988 ↗
63. Modelling the properties of closed-cell cellular materials from tomography images using finite shell elements10.1016/j.actamat.2008.07.023 ↗
64. Tomography-based Monte Carlo determination of radiative properties of reticulate porous ceramics10.1016/j.jqsrt.2006.11.002 ↗
65. Representative elementary volumes required to characterize the normal spectral emittance of silicon carbide foams used as volumetric solar absorbers10.1016/j.ijheatmasstransfer.2015.09.069 ↗
66. A simple expression for the normal spectral emittance of open-cell foams composed of optically thick and smooth struts10.1016/j.jqsrt.2016.12.011 ↗
67. On the microstructure of open-cell foams and its effect on elastic properties10.1016/j.ijsolstr.2007.10.008 ↗
68. Statistical analysis of the local strut thickness of open cell foams10.5566/ias.v32.p1-12 ↗
69. Thermal radiation properties of ceramic materials, Heat Transfer-Japanese
70. Determination of scattering and absorption coefficients for plasma sprayed yttria stabilized zirconia thermal barrier coatings at elevated temperatures10.1111/j.1551-2916.2009.03217.x ↗
71. Analysis and modeling of the pore size effect on the thermal conductivity of alumina foams for high temperature applications10.1016/j.ceramint.2017.07.035 ↗
72. Radiative properties of ceramic Al2O3, AlN and Si3N4—II: modeling10.1007/s10765-017-2259-x ↗
73. Radiative properties of ceramic Al2O3, AlN and Si3N4—I: experiments10.1007/s10765-016-2067-8 ↗
74. Determining the optical properties of turbid media by using the Adding-Doubling Method10.1364/AO.32.000559 ↗
75. Gervais · 1998 · 2 · 761
76. Effects of ligaments shape on radiative heat transfer in metal foams10.1108/HFF-02-2015-0046 ↗
77. 3D numerical simulation of flow and conjugate heat transfer through a pore scale model of high porosity open cell metal foam10.1016/j.ijheatmasstransfer.2009.12.067 ↗
78. Pore-level determination of spectral reflection behaviors of high-porosity metal foam sheets10.1016/j.infrared.2017.12.016 ↗
79. Study of radiative transfer in 1D densely packed bed layer containing absorbing-scattering spherical particles10.1016/j.ijheatmasstransfer.2016.06.065 ↗
80. W.J. Zhang, J.M. Zhao, L.H. Liu, Experimental study of the effective BRDF of a copper foam sheet, in: Proceedings of the 7th International Symposium on Radiative Transfer, RAD-13 June 2-8, Kusadasi, Turkey, 2013.10.1615/ICHMT.2013.IntSympRadTransf.130 ↗