journal article·2018-10

Improving the charge separation and collection at the buffer/absorber interface by double-layered Mn-substituted CZTS

Stener Lie, Mario Indra Sandi, Ying Fan Tay, Wenjie Li, Joel Ming Rui Tan, Douglas M. Bishop, Oki Gunawan, Lydia Helena Wong

Publisher page

Abstract

Abstract A non-ideal buffer-absorber interface due to interface recombination is one of the limitations in Cu2ZnSnS4 (CZTS) solar cells. An absorber gradient using partial cation-substitution is one possible solution to this issue by reducing interface recombination sites and improving band alignment. Partial substitution of Zn with Mn is a potentially attractive concept owing to its abundance as well as similar size and electronic properties compared to Zn. In this study, Cu2MnxZn1-xSnS4 (CMZTS) thin film were fabricated by a sol-gel spin coating technique to understand the effect of Mn on the device performance. X-ray diffraction (XRD) and Raman analysis confirm Mn substitution for Zn in the crystal lattice of Cu2ZnSnS4 (CZTS) with no secondary phases detected for x ≤ 0.4. Enhancement of short circuit current (Jsc) in Cu2Mn0.15Zn0.85SnS4 has led to improved efficiency in comparison with CZTS. Since external quantum efficiency (EQE) indicates the short wavelength collection as the main reason for the improved Jsc, we designed a double layered structure of CZTS as bottom layer and CM0.15Z0.85TS as top layer. With this structure, we obtained our best performance cell with power conversion efficiency (PCE) of 5.73% and Jsc of 17.86 mA/cm2. The improved Jsc is attributed to increased depletion width and higher activation energy of the limiting recombination mechanism as shown by capacitance-voltage and temperature dependent current-voltage measurements. Our study concludes that CM0.15Z0.85TS top layer improves the interface quality of the p-n junction and may be an alternative method to improve the performance of CZTS solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. S.R. Hall, J.T. Szymański, J.M. Stewart, M.A.o. Canada, Kesterite, Cu2(Zn,Fe)SnS4, and Stannite, Cu2(Fe,Zn}SnS4: Structurally Similar But Distinct Minerals: Supplementary Unpublished Material, 1978.
2. Efficiency limits for single-junction and tandem solar cells10.1016/j.solmat.2006.06.002 ↗
3. High efficiency Cu2ZnSn(S,Se)4 solar cells by Applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
4. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
5. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
6. Band offsets engineering at CdxZn1−xS/Cu2ZnSnS4 heterointerface10.1088/1674-1056/25/12/127102 ↗
7. The steady rise of kesterite solar cells10.1021/acsenergylett.7b00131 ↗
8. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds10.1002/adfm.201502272 ↗
9. Enhancement of open circuit voltage of solution processed Cu2ZnSnS4 solar cell with 7.2% efficiency by incorporation of silver10.1021/acsenergylett.6b00509 ↗
10. Tetrahedral quaternary chalcogenides of the type Cu2IIIVS4(Se4)10.1016/0025-5408(74)90135-4 ↗
11. Electrical, magnetic, and EPR studies of the quaternary chalcogenides Cu2AIIBIVX4 prepared by iodine transport10.1016/0022-4596(80)90457-0 ↗
12. A general strategy for synthesis of quaternary semiconductor Cu2MSnS4 (M = Co2+, Fe2+, Ni2+, Mn2+) nanocrystals10.1039/c2jm33574c ↗
13. Magnetic ordering of the antiferromagnet Cu2MnSnS4 from magnetization and neutron-scattering measurements10.1103/PhysRevB.56.5424 ↗
14. Nonconventional (Non-Silicon-Based) photovoltaic materials10.1146/annurev-matsci-062910-100437 ↗
15. Growth of Cu2MnSnS4 PV absorbers by sulfurization of evaporated precursors10.1016/j.jallcom.2016.09.176 ↗
16. Photovoltaic effect in earth abundant solution processed Cu2MnSnS4 and Cu2MnSn(S,Se)4 thin films10.1016/j.solmat.2016.07.006 ↗
17. Relevant efficiency enhancement of emerging Cu2MnSnS4 thin film solar cells by low temperature annealing10.1016/j.solener.2017.03.087 ↗
18. Synthesis and characterization of earth-abundant Cu2MnSnS4thin films using a non-toxic solution-based technique10.1039/C5RA14595C ↗
19. Photovoltaic materials and devices based on the alloyed kesterite absorber (AgxCu1–x)2ZnSnSe410.1002/aenm.201502468 ↗
20. Cation substitution induced structural transition, band gap engineering and grain growth of Cu2CdxZn1−xSnS4 thin films10.1016/j.jallcom.2016.11.121 ↗
21. Cation substitution of solution‐processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
22. Composition dependence of the structure and optical properties of Cu2MnxZn1−xSnS4 thin films10.1016/j.jallcom.2014.12.047 ↗
23. Compositional optimization of photovoltaic grade Cu2ZnSnS4 films grown by pneumatic spray pyrolysis10.1016/j.tsf.2012.12.082 ↗
24. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
25. Cu2ZnSnS4 thin film solar cells prepared by non-vacuum processing10.1016/j.solmat.2008.12.009 ↗
26. Effect of grain size and dislocation density on the performance of thin film polycrystalline silicon solar cells10.1063/1.365341 ↗
27. Cu2ZnSnS4 nanoplate arrays synthesized by pulsed laser deposition with high catalytic activity as counter electrodes for dye-sensitized solar cell applications10.1039/c3ta13358c ↗
28. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
29. Flower-like Cu2MnSnS4 particles synthesized via microwave irradiation method
30. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
31. Raman spectra of Cu2BIICIVX4VI magnetic quaternary semiconductor compounds with tetragonal stannite type structure10.1063/1.4921438 ↗
32. Preparation of thin films by sulfurizing sol–gel deposited precursors10.1016/j.solmat.2007.04.012 ↗
33. Far infrared studies on stannite and wurtzstannite type compounds10.1016/0584-8539(91)80283-O ↗
34. Fourier-transform infrared and Raman spectra of pure and Al-, B-, Ti-and Fe-substituted silicalites: stretching-mode region10.1039/ft9938904123 ↗
35. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
36. Design of I2–II–IV–VI4 semiconductors through element substitution: the thermodynamic stability limit and chemical trend10.1021/cm500598x ↗
37. A simple and efficient solar cell parameter extraction method from a single current-voltage curve10.1063/1.3632971 ↗
38. C.-.T. Sah, R.N. Noyce, W. Shockley, Carrier generation and recombination in pn junctions and pn junction characteristics, in: Proceedings of the IRE, 45 1228–1243.10.1109/JRPROC.1957.278528 ↗
39. Coupled defect‐level recombination: theory and application to anomalous diode characteristics10.1063/1.360007 ↗
40. Exact analytical solution of the diode ideality factor of a pn junction device using Lambert W-function model
41. Bulk and metastable defects in CuIn[sub 1−x]Ga[sub x]Se[sub 2] thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
42. Electronic and optical properties of Cu[sub 2]ZnSnS[sub 4] and Cu[sub 2]ZnSnSe[sub 4]10.1063/1.3318468 ↗
43. Temperature dependent electrical characterization of thin film Cu2ZnSnSe4solar cells10.1088/0022-3727/49/8/085101 ↗
44. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
45. Abou-Ras · 2016
46. Temperature dependence of shunt resistance in photovoltaic devices10.1063/1.97076 ↗