Electrochemically deposited nano polyaniline films as hole transporting layers in organic solar cells
Source abstract
Abstract
Abstract In this study, we prepared organic solar cells based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) with electrochemically deposited nano polyaniline (PANI) buffer layers (either PANI – 0.1 M or PANI – 0.3 M) as hole transporting layers and compared their performances with those of solar cells lacking the buffer layer (i.e., bare ITO) or featuring buffer layers of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) or PEDOT:PSS-covered PANI. The power conversion efficiency of the device featuring PANI/PEDOT:PSS as the buffer layer (2.76%) was greater than those of devices featuring bare ITO (0.75%) or the PANI – 0.1 M (1.33%), PANI – 0.3 M (1.78%), or PEDOT:PSS (2.30%) layers. We suspect that the increased conductivity of the PANI/PEDOT:PSS composite, caused by interactions between the PANI nitrogen atoms and the functional groups of PSS, led to additional doping of PANI. This primary doping effect by PSS toward PANI lowered the series resistance of the PANI/PEDOT:PSS buffer layer and, thereby, increased the photocurrent of the device. As a result, electrochemically deposited PANI buffer layers, with or without PEDOT:PSS, appear to be promising hole transporting layers for organic electronic devices that require different candidate materials (other than PEDOT:PSS conductors) and/or different processing conditions (other than spin-coating).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Investigation of the effects of doping and post-deposition treatments on the conductivity, morphology, and work function of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) films10.1002/adfm.200400073 ↗
2. Performance and stability of electroluminescent device with self-assembled layers of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) and polyelectrolytes10.1016/j.tsf.2005.08.174 ↗
3. Improving power conversion efficiency in polythiophene/fullerene-based bulk heterojunction solar cells10.1016/j.solmat.2007.01.004 ↗
4. Effects of annealing of poly(3-hexylthiophene) film on the performance of double-layered EL devices of ITO/polymer/Alq3/Mg–Ag10.1016/j.synthmet.2006.12.009 ↗
5. Effect of substrate materials in the growth of ZnSe on GaAs and GaP substrates10.1063/1.110853 ↗
6. Carrier injection into semiconducting polymers: Fowler–Nordheim field-emission tunneling10.1016/0379-6779(94)90007-8 ↗
7. Increased brightness and lifetime of polymer light-emitting diodes with polyaniline anodes10.1016/S0379-6779(96)03690-9 ↗
8. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
9. Inspection of substrate-heated modified PEDOT:PSS morphology for all spray deposited organic photovoltaics10.1016/j.solmat.2010.03.013 ↗
10. High efficient plastic solar cells fabricated with a high-throughput gravure printing method10.1016/j.solmat.2010.05.027 ↗
11. Annealing-free fabrication of P3HT:PCBM solar cells via simple brush painting10.1016/j.solmat.2009.08.017 ↗
12. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
13. New luminescent polymers for LEDs10.1016/S0379-6779(98)80041-6 ↗
14. Synthesis and characterization of poly[2,5-bis(triethoxy)-1,4-phenylene vinylene]10.1002/pola.1995.080330319 ↗
15. Novel poly(p-phenylene vinylene) derivatives with oligo(ethylene oxide) side chains: synthesis and pattern formation10.1021/cm980570m ↗
16. High performance photonic devices made with semiconducting polymers10.1016/S0379-6779(96)03695-8 ↗
17. Low voltage operation of large area polymer LEDs10.1016/S0379-6779(97)03988-X ↗
18. Application of polyaniline (emeraldine base, EB) in polymer light-emitting devices10.1016/0379-6779(95)03569-6 ↗
19. Ultrathin self-assembled layers at the ITO interface to control charge injection and electroluminescence efficiency in polymer light-emitting diodes10.1002/(SICI)1521-4095(199807)10:10<769::AID-ADMA769>3.0.CO;2-3 ↗
20. Polymeric anodes for improved polymer light-emitting diode performance10.1063/1.118953 ↗
21. Soluble phenyl-substituted PPVs: new materials for highly efficient polymer LEDs10.1002/(SICI)1521-4095(199811)10:16<1340::AID-ADMA1340>3.0.CO;2-G ↗
22. Polymeric anodes for organic light-emitting diodes10.1016/S0379-6779(97)80207-X ↗
23. Electropolymerized poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film on ITO glass and its application in photovoltaic device10.1016/j.solmat.2009.09.014 ↗
24. Sulfonated polyaniline/poly(3-methylthiophene)-based photovoltaic devices10.1007/s10008-005-0648-8 ↗
25. Electrodeposited polyaniline films decorated with nano-islands: characterization and application as anode buffer layers in solar cells10.1016/j.solmat.2010.08.028 ↗
26. Polymer solar cells incorporating one-dimensional polyaniline nanotubes10.1016/j.orgel.2008.08.001 ↗
27. Effects of thickness and thermal annealing of the PEDOT:PSS layer on the performance of polymer solar cells10.1016/j.orgel.2008.10.003 ↗
28. Surface oxidation activates indium tin oxide for hole injection10.1063/1.371901 ↗
29. Work function increase of indium–tin–oxide surfaces by atmospheric air plasma treatment with steady-state airflow10.1116/1.2006137 ↗
30. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
31. 4.2% Efficient organic photovoltaic cells with low series resistances10.1063/1.1713036 ↗
32. Influence of buffer layers on the performance of polymer solar cells10.1063/1.1739279 ↗
33. Scientific importance properties and growing applications of poly(3,4-ethylenedioxythiophene)10.1039/b417803n ↗
34. PEDT/PSS for efficient hole-injection in hybrid organic light-emitting diodes10.1016/S0379-6779(99)00328-8 ↗
35. Polyaniline as a hole injection layer on organic photovoltaic cells10.1016/j.solmat.2009.08.018 ↗
36. Transparent carbon nanotube sheets as 3-D charge collectors in organic solar cells10.1016/j.solmat.2006.10.002 ↗
37. Cooperative doping in polyaniline-poly(ethylene-3,4-dioxy thiophene):poly(styrenesulfonic acid) composite system10.1007/s10965-011-9657-8 ↗
38. Ultrafast dynamics of polarons in conductive polyaniline: comparison of primary and secondary doped forms10.1021/jp803984f ↗