Power efficiency enhancement of solution-processed small-molecule solar cells based on squaraine via thermal annealing and solvent additive methods
Source abstract
Abstract
Abstract A small-molecule donor material of 2,4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl] squaraine (SQ) was used to fabricate the solution-processed solar cells with fullerene. The thermal annealing process and the solvent additive method were systematically investigated to illuminate their effects on the performance of solar cells. The optimized device exhibited a power conversion efficiency (PCE) of 3.31% under 1 sun, AM 1.5G simulated solar irradiation with thermal annealing at 50 °C and a small amount of 1,8-diiodooctane (DIO) additive with a volume ratio of 0.4%. A reduced surface roughness and improved charge carrier mobility were ascribed to the enhancement of PCE in DIO incorporated devices. The simulation using a theoretical model of charge transfer state based on Onsager–Braun theory was carried out, and the results revealed that thermal annealing and solvent additive could facilitate charge transfer dissociation, increase charge carrier generation, and thereby improve the performance of solar cells based on SQ: fullerene bulk heterojunction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Conjugated polymers for high-efficiency organic photovoltaics10.1039/B9PY00325H ↗
3. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗
4. Polymer solar cells10.1038/nphoton.2012.11 ↗
5. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
6. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
7. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
8. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
9. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
10. Gravure printed flexible organic photovoltaic modules10.1016/j.solmat.2010.12.020 ↗
11. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
12. Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells10.1016/j.solmat.2012.04.039 ↗
13. A complete process for production of flexible large area polymer solar cells entirely using screen printing-first public demonstration10.1016/j.solmat.2008.12.001 ↗
14. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
15. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
16. A new approach to the solvent system for inkjet-printed P3HT:PCBM solar cells and its use in devices with printed passive and active layers10.1016/j.solmat.2010.05.054 ↗
17. Combinatorial screening of polymer: fullerene blends for organic solar cells by inkjet printing10.1002/aenm.201000027 ↗
18. Spray-coated organic solar cells with large-area of 12.25cm210.1016/j.solmat.2010.10.033 ↗
19. Simple roll coater with variable coating and temperature control for printed polymer solar cells10.1016/j.solmat.2011.08.027 ↗
20. The OE-A OPV demonstrator anno domini 201110.1039/c1ee01891d ↗
21. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
22. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
23. Small molecule solution-processed bulk heterojunction solar cells10.1021/cm102189g ↗
24. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
25. Small molecules based on benzo[1,2-b:4,5-b′]dithiophene unit for high-performance solution-processed organic solar cells10.1021/ja306865z ↗
26. Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
27. A solution-processable star-shaped molecule for high-performance organic solar cells10.1002/adma.201004445 ↗
28. A naphthodithiophene-diketopyrrolopyrrole donor molecule for efficient solution-processed solar cells10.1021/ja202791n ↗
29. Solvent-annealed crystalline squaraine: PC70BM (1:6) solar cells10.1002/aenm.201100045 ↗
30. Solution-processed organic solar cells from dye molecules: an investigation of diketopyrrolopyrrole: vinazene heterojunctions10.1021/am201304e ↗
31. Solution processable rhodanine-based small molecule organic photovoltaic cells with a power conversion efficiency of 6.1%10.1002/aenm.201100572 ↗
32. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
33. Bulk heterojunction solar cells based on a low-bandgap carbazole-diketopyrrolopyrrole copolymer
34. High efficiency organic photovoltaic cells based on a vapor deposited squaraine donor
35. Photocurrent generation in polymer–fullerene bulk heterojunctions
36. Improvement in open circuit voltage of organic solar cells by inserting a thin phosphorescent iridium complex layer
37. Organic solar cells with a multicharge separation structure consisting of a thin rubrene fluorescent dye for open circuit voltage enhancement
38. Effect of buffer layers on the performance of organic photovoltaic cells based on copper phthalocyanine and C6010.1016/j.solmat.2009.09.012 ↗
39. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
40. Detailed analysis of bathocuproine layer for organic solar cells based on copper phthalocyanine and C60
41. A solution processable D-A-D molecule based on thiazolothiazole for high performance organic solar cells10.1002/aenm.201100505 ↗
42. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
43. Organic photovoltaic cells based on a medium-bandgap phosphorescent material and C6010.1021/jp210245a ↗
44. Fill factor of planar heterojunction organic solar cells with varied donor materials
45. Energy losing rate and open-circuit voltage analysis of organic solar cells based on detailed photocurrent simulation
46. Reversible, metastable, ultrafast photoinduced electron transfer from semiconducting polymers to buckminsterfullerene and in the corresponding donor/acceptor heterojunctions10.1142/S0217979294000105 ↗
47. Solution-processed squaraine bulk heterojunction photovoltaic cells10.1021/nn100195j ↗
48. Electron transport in a methanofullerene10.1002/adfm.200390004 ↗
49. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
50. Non-basic high-performance molecules for solution-processed organic solar cells10.1002/adma.201201127 ↗
51. Exciton diffusion length analysis of mixed donor materials in organic solar cells by doping with phosphorescent iridium complex