Characterization of defects in mono-like silicon wafers and their effects on solar cell efficiency
Source abstract
Abstract
Abstract Cell efficiency distribution of mono-like silicon ingot was investigated. And a long low-efficiency tail was found in the efficiency distribution chart, which degraded the cost-effectiveness of this material. Highly spatial resolved photoluminescence and electron back-scattered diffraction characterizations of the mono-like silicon wafers were performed to investigate the low-efficiency reasons. In the experiments, we found that lots of sub-grains, invisible with naked eyes, formed by low angle grain boundaries and high density of dislocations. Relationship of low angle grain boundaries, dislocations and cell efficiency were also investigated and calculated. It is found that the density of dislocations and low angle grain boundaries increase rapidly in the directional solidification of mono-like silicon ingot. Wafers from the top side of the ingot had high density of dislocations and low angle grain boundaries, which led to low-efficiency cell performance and long low-efficiency tail distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Growth of structure-controlled polycrystalline silicon ingots for solar cell by casting10.1016/j.actamat.2006.03.014 ↗
2. Photoluminescence analysis of intragrain defects in multicrystalline silicon wafers for solar cells10.1063/1.2776003 ↗
3. Electron-beam-induced current study of small-angle grain boundaries in multicrystalline silicon10.1016/j.scriptamat.2005.03.010 ↗
4. Impact of type of crystal defects in multicrystalline Si on electrical properties and interaction with impurities
5. Effect of dislocation density on the efficiency of multicrystalline silicon solar cells
6. Quantitative analysis of subgrain boundaries in Si multicrystals and their impact on electrical properties and solar cell performance10.1063/1.3079504 ↗
7. R. Bakowskie, R. Lantzsch, T. Kaden, K.G. Eller, D. Lausch, Y. Ludwig, K. Petter, Comparison of recombination active defects in multicrystalline silicon by means of PL imaging and reverse biased electroluminescence, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, 5–9 September 2011, Hamburg, Germany.
8. Evaluating the electrical properties of silicon wafer cells using hyperspectral imaging of luminescence10.1063/1.3664134 ↗
9. Improved multicrystalline silicon ingot crystal quality through seed growth for high efficiency solar cells10.1002/pip.1221 ↗
10. Minority carrier lifetime imaging of silicon wafers calibrated by quasi-steady-state photoluminescence10.1016/j.solmat.2010.12.016 ↗
11. Photoluminescence imaging of silicon wafers10.1063/1.2234747 ↗