journal article·2012-01

Ordered microstructure induced by orientation behavior of liquid-crystal polythiophene for performance improvement of hybrid solar cells

Wei Chen, Yiwang Chen, Fan Li, Lie Chen, Kai Yuan, Kai Yao, Peishan Wang

Publisher page

Abstract

Abstract Control of the nanoscale morphology or microstructure of the active layer in hybrid solar cells is critical to ensure the high device performance. Here, a novel electron-donor material, liquid-crystalline polythiophene containing a cyano-biphenyl mesogenic pendant, poly[3-(6-(4-cynaobiphenyloxy)-hexyl) thiophene] (P3HbpT), was rationally designed and synthesized. The spontaneous orientation of cyano-biphenyl mesogen endowed the P3HbpT with a well ordered morphology and facilitated the homogeneous dispersion of ZnO nanoparticles in the composites. The P3HbpT/ZnO composite films exhibited a red-shift absorption (12 nm), the lower LUMO and more ordered domains after undergoing annealing at liquid crystal (LC) states temperature (175 °C), which indicated that the spontaneous assembly behavior of the liquid-crystalline polythiophene could induce the ZnO nanoparticles to form nano-dispersing structure with highly oriented channel layers upon heating at liquid crystalline states. Furthermore, the hybrid bulk-heterojunction devices based on P3HbpT/ZnO active layer have been constructed. Without extensive optimization, the devices undergoing annealing at LC state yielded a Voc of 0.83 V and power conversion efficiency (PCE) of 0.61%, showing a significantly increased Jsc and FF with respect to the un-annealed counterpart.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
3. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
4. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
5. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
6. Conjugated polymer based on polycyclic aromatics for bulk heterojunction organic solar cells: a case study of quadrathienonaphthalene polymers with 2% efficiency10.1002/adfm.200901407 ↗
7. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
8. W.J.E. Beek, R.A.J. Janssen, Hybrid polymer–inorganic photovoltaic cells, in: Proceedings of the Hybrid Nanocomposites for Nanotechnology, Springer, US, 2009, pp. 1–65.10.1007/978-0-387-30428-1_8 ↗
9. Hybrid nanorod-polymer solar cells10.1126/science.1069156 ↗
10. Hybrid solar cells with prescribed nanoscale morphologies based on hyperbranched semiconductor nanocrystals10.1021/nl062660t ↗
11. Photoinduced formation of polythiophene/TiO2 nanohybrid heterojunction films for solar cell applications10.1021/jp7099064 ↗
12. Enhanced performance of hybrid photovoltaic devices via surface-modifying metal oxides with conjugated polymer10.1016/j.solmat.2009.11.022 ↗
13. Hybrid polymer solar cells based on zinc oxide10.1039/b501979f ↗
14. The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells10.1038/nmat2533 ↗
15. Impact of interfacial polymer morphology on photoexcitation dynamics and device performance in P3HT/ZnO heterojunctions10.1039/b903849c ↗
16. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
17. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
18. A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration10.1016/j.solmat.2008.12.001 ↗
19. A simple nanostructured polymer/ZnO hybrid solar cell—preparation and operation in air10.1088/0957-4484/19/42/424013 ↗
20. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
21. Influence of blend microstructure on bulk heterojunction organic photovoltaic performance10.1039/C0CS00045K ↗
22. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
23. Meso-structure formation for enhanced organic photovoltaic cells10.1021/ol051950y ↗
24. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
25. Liquid-crystalline semiconducting copolymers with intramolecular donor–acceptor building blocks for high-stability polymer transistors10.1021/ja8095569 ↗
26. X-ray scattering study of thin films of poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene10.1021/ja0670714 ↗
27. High carrier mobility polythiophene thin films: structure determination by experiment and theory10.1002/adma.200602651 ↗
28. Bulk heterojunction materials composed of poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene): ultrafast electron transfer and carrier recombination†10.1021/jp711404c ↗
29. Liquid crystalline polymers for efficient bilayer-bulk-heterojunction solar cells10.1021/jp900241r ↗
30. Synthesis and properties of polyacetylenes containing terphenyl pendent group with different spacers10.1021/ma802686d ↗
31. Synthesis and helical conformation of novel optically active liquid crystalline poly(p-phenylene)s containing cyanoterphenyl mesogen as pendant10.1021/ma900751y ↗
32. Photoluminescent, liquid-crystalline, and electrochemical properties of para-phenylene-based alternating conjugated copolymers10.1002/pola.23803 ↗
33. Orientation behavior of bulk heterojunction solar cells based on liquid-crystalline polyfluorene and fullerene10.1021/jp1070314 ↗
34. H. Womelsdorf, W. Hoheisel, G. Passing, Nano-scale Precipitating Zinc Oxide used e.g. for Protecting UV-Sensitive Organic Polymers Consists of Particles Having an Average Specified Primary Particle Diameter, DE19907704 (A1) [P/OL], Germany, 2000-23.02.1999.
35. Synthesis of polythiophene derivatives bearing ferroelectric liquid crystalline substituents10.1021/ma0354492 ↗
36. Disubstituted polyacetylenes containing photopolymerizable vinyl groups and polar ester functionality:▒ polymer synthesis, aggregation-enhanced emission, and fluorescent pattern formation10.1021/ma062791g ↗
37. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
38. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
39. Synthesis of new thiophene-based π-conjugated polymers for investigation of molecular alignment on the surface of platinum plate10.1021/ma060254q ↗
40. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗
41. Mesogens mediated self-assembly in applications of bulk heterojunction solar cells based on a conjugated polymer with narrow band gap10.1021/ma200179u ↗
42. Self-orienting head-to-tail poly(3-alkylthiophenes): new insights on structure-property relationships in conducting polymers10.1021/ja00064a070 ↗
43. Electrochemical properties of luminescent polymers and polymer light-emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
44. Synthesis of 4,7-diphenyl-2,1,3-benzothiadiazole-based copolymers and their photovoltaic applications10.1021/ma900598c ↗
45. Influence of molecular weight on the performance of organic solar cells based on a fluorene derivative10.1002/adfm.201000224 ↗
46. Poly(diketopyrrolopyrrole-terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗
47. Effect of polymer processing on the performance of poly(3-hexylthiophene)/ZnO nanorod photovoltaic devices10.1021/jp0757816 ↗
48. Effect of ZnO processing on the photovoltage of ZnO/poly(3-hexylthiophene) solar cells10.1021/jp802626u ↗