journal article·2012-10

Effects of ZnO:Al films on CIGS PV modules degraded under accelerated damp heat

Dong-Won Lee, Oh-Yun Kwon, Jun-Kwang Song, Chi-Hong Park, Kyung-Eun Park, Song-Min Nam, Yong-Nam Kim

Publisher page

Abstract

For the successful commercial production of CIGS PV modules, a good long-term damp heat stability of solar modules is necessary. The causes for the degradation of encapsulated solar modules are clearly explained. This article investigates the degradation behavior of encapsulated CIGS PV modules combined with the failure analysis of AZO films in CIGS cells. CIGS PV modules were exposed to the damp heat test of the IEC 61646 qualification standard—the modules are discolored from the outside edge to the center. Moreover, each module had its own distinct discolored area. The discolored area of the modules is significantly associated with the degradation of FF and efficiency. To clarify the causes of the degradation of FF and efficiency, failure analysis of AZO films in CIGS cells was performed. Electrical and structural properties as well as observation of the microstructure depending on the position of the AZO layers were characterized to explain the degradation mechanism of the encapsulated CIGS PV modules. It was revealed that the discoloration phenomenon of the modules and the degradation of AZO films were caused by the penetration of water molecules and adsorption of oxygen. By XPS and FT-IR analyses, the causes of degradation were confirmed. It was attributed to the generation of Zn(OH)2 and carboxylic acids by a combination of EVA, AZO and water molecules.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. CuInSe2 for photovoltaic applications10.1063/1.349175 ↗
2. Toward GW/year of CIGS production within the next decade10.1016/j.solmat.2007.04.003 ↗
3. Manufacturing and application of CIS solar modules10.1016/j.tsf.2006.12.150 ↗
4. Low cost processing of CIGS thin film solar cells10.1016/j.solener.2004.08.015 ↗
5. Mass-production technology for CIGS modules10.1016/j.solmat.2009.02.015 ↗
6. K. Kushiya, S. Kuriyagawa, K. Tazawa, T. Okazawa, M. Tsunoda, Improved stability of CIGS-based thin-film PV modules, in: Proceedings of the 4th World Conference on PV Energy Conversion, Waikoloa, Hawaii, USA, 2006, pp. 348–351.10.1109/WCPEC.2006.279461 ↗
7. D.J. Coyle, H.A. Blaydes, J.E. Pickett, R.S. Northey, J.O. Gardner, Degradation kinetics of CIGS solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, 2009, pp. 001943–001947.10.1109/PVSC.2009.5411551 ↗
8. Encapsulation of Cu(In,Ga)Se2 solar cell with Al2O3 thin-film moisture barrier grown by atomic layer deposition10.1016/j.solmat.2010.08.021 ↗
9. Influence of damp heat testing on the electrical characteristics of Cu(In,Ga)(S,Se)2 solar cells10.1016/S0040-6090(01)01511-5 ↗
10. The change of the electronic properties of CIGS devices induced by the ‘damp heat’ treatment10.1016/S0040-6090(01)01510-3 ↗
11. RF magnetron sputtered ZnO:Al thin films on glass substrates: a study of damp heat stability on their optical and electrical properties10.1016/j.solmat.2007.07.008 ↗
12. Damp heat stability and annealing behavior of aluminum doped zinc oxide films prepared by magnetron sputtering10.1016/j.tsf.2005.12.130 ↗
13. F.J. Pern, S.H. Glick, R. Sundaramoorthy B. To, X. Li, C. DeHart, S. Glynn, T. Gennett, R. Noufi, T. Gessert, Damp-heat instability and mitigation of ZnO-based thin films for CuInGaSe2 solar cells, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 001166–001171.10.1109/PVSC.2010.5614116 ↗
14. F.J. Pern, R. Noufi, X. Li, C. DeHart, B. To, Damp-heat induced degradation of transparent conducting oxides for thin-film solar cells, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, 2008, pp. 1–6.10.1109/PVSC.2008.4922491 ↗