Inverted ITO- and PEDOT:PSS-free polymer solar cells with high power conversion efficiency
Source abstract
Abstract
Abstract Highest published power conversion efficiencies of organic solar cells have mostly been achieved on substrates bearing a transparent indium tin oxide (ITO) electrode. However, the incorporation of ITO is not suited for future industrial production processes of organic solar cells, which will rely on a high-throughput of flexible substrates in order to achieve low cost of the final product. In this manuscript we present an alternative transparent electrode consisting of a layer stack of aluminum doped zinc oxide and a thin silver layer. Substrates with these electrodes have a transparency of above 75% in the wavelength range in which the photoactive layer absorbs light. Solar cells with a bulk-heterojunction of PTB7 and PC 71 BM in an inverted device architecture achieved a power conversion efficiency of 6.1%, which is the highest reported value for polymer solar cells free from both ITO and PEDOT:PSS. The sheet resistance of the novel electrodes increased only marginally after repeated bending which shows their full compatibility with future reel-to-reel processes or flexible products.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
2. Overcoming efficiency challenges in organic solar cells: rational development of conjugated polymers10.1039/c2ee21608f ↗
3. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
4. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
5. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
6. Thinking small for solar10.1557/mrs.2012.62 ↗
7. Heliatek, Heliatek consolidates its technology leadership by establishing a new world record for organic solar technology with a cell efficiency of 12%, Press release (2013), 〈http://www.heliatek.com/newscenter/presse〉, (accessed 19.02.2013-).
8. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
9. Simultaneous enhancement of open-circuit voltage, short-circuit current density, fill factor in polymer solar cells10.1002/adma.201103006 ↗
10. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
11. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
12. Synthetic control of structural order in n-alkylthieno[3,4-c]pyrrole-4,6-dione-based polymers for efficient solar cells10.1021/ja103275u ↗
13. The effect of additive on performance and shelf-stability of HSX-1/PCBM photovoltaic devices10.1016/j.orgel.2011.05.028 ↗
14. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
15. High-performance polymer heterojunction solar cells of a polysilafluorene derivative
16. The plastic led: a flexible light-emitting device using a polyaniline transparent electrode10.1016/0379-6779(93)90568-H ↗
17. A mechanical assessment of flexible optoelectronic devices10.1016/S0040-6090(01)01138-5 ↗
18. The fracture of brittle thin films on compliant substrates in flexible displays10.1016/S0013-7944(01)00104-7 ↗
19. Bending fatigue study of sputtered ITO on flexible substrate10.1109/JDT.2011.2151830 ↗
20. Optical design of transparent thin metal electrodes to enhance in-coupling and trapping of light in flexible polymer solar cells10.1002/adma.201203099 ↗
21. Ex-ante environmental and economic evaluation of polymer photovoltaics10.1002/pip.891 ↗
22. Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment10.1039/c1ee01766g ↗
23. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
24. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
25. ITO-free wrap through organic solar cells—a module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
26. Organic solar cells using nanoimprinted transparent metal electrodes10.1002/adma.200800750 ↗
27. All solution roll-to-roll processed polymer solar cells free from indium–tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
28. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
29. Aerosol jet printed grid for ITO-free inverted organic solar cells10.1016/j.solmat.2012.06.042 ↗
30. Highly efficient indium tin oxide-free organic photovoltaics using inkjet-printed silver nanoparticle current collecting grids10.1063/1.4765343 ↗
31. Photonic sintering of inkjet printed current collecting grids for organic solar cell applications10.1016/j.orgel.2012.10.012 ↗
32. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
33. Highly efficient organic solar cells with printable low-cost transparent contacts10.1063/1.2907564 ↗
34. High-conductivity poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film for use in ITO-free polymer solar cells10.1039/b813079e ↗
35. Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes10.1016/j.orgel.2009.06.019 ↗
36. Indium tin oxide-free and metal-free semitransparent organic solar cells10.1063/1.3499299 ↗
37. Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
38. Interlayer for modified cathode in highly efficient inverted ITO-free organic solar cells10.1002/adma.201104579 ↗
39. Surface interpenetration between conducting polymer and PET substrate for mechanically reinforced ITO-free flexible organic solar cells10.1016/j.solmat.2012.09.004 ↗
40. Carbon nanotube network electrodes enabling efficient organic solar cells without a hole transport layer10.1063/1.3453445 ↗
41. Composites of carbon nanotubes and conjugated polymers for photovoltaic devices10.1002/(SICI)1521-4095(199910)11:15<1281::AID-ADMA1281>3.0.CO;2-6 ↗
42. Conducting and transparent single-wall carbon nanotube electrodes for polymer–fullerene solar cells10.1063/1.2132065 ↗
43. Organic solar cells with carbon nanotubes replacing In2O3:Sn as the transparent electrode10.1063/1.2210081 ↗
44. Transparent carbon films as electrodes in organic solar cells10.1002/anie.200704909 ↗
45. Large area, continuous, few-layered graphene as anodes in organic photovoltaic devices10.1063/1.3204698 ↗
46. Multilayer graphene films as transparent electrodes for organic photovoltaic devices10.1016/j.solmat.2011.09.031 ↗
47. Solution-processed metal nanowire mesh transparent electrodes10.1021/nl073296g ↗
48. Fully solution-processed inverted polymer solar cells with laminated nanowire electrodes10.1021/nn900758e ↗
49. Insights on the working principles of flexible and efficient ITO-free organic solar cells based on solution processed Ag nanowire electrodes10.1016/j.solmat.2012.03.009 ↗
50. Transparent, dip-coated silver nanowire electrodes for small molecule organic solar cells10.1016/j.orgel.2012.09.032 ↗
51. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target dc sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
52. Improved light harvesting in tin-doped indum oxide (ITO)-free inverted bulk-heterojunction organic solar cells using capping layers10.1063/1.2981525 ↗
53. Efficient large area semitransparent organic solar cells based on highly transparent and conductive ZTO/Ag/ZTO multilayer top electrodes10.1016/j.orgel.2011.06.015 ↗
54. Inverted ITO-free organic solar cells based on p and n semiconducting oxides. New designs for integration in tandem cells, top or bottom detecting devices, photovoltaic windows10.1039/C0EE00318B ↗
55. Cu-based multilayer transparent electrodes: a low-cost alternative to ITO electrodes in organic solar cells10.1016/j.solmat.2012.01.016 ↗
56. Device engineering for highly efficient top-illuminated organic solar cells with microcavity structures10.1002/adma.201200487 ↗
57. Effects of intrinsic ZnO buffer layer based on P3HT/PCBM organic solar cells with Al-doped ZnO electrode10.1016/j.solmat.2008.11.033 ↗
58. A comparison of fluorine tin oxide and indium tin oxide as the transparent electrode for P3OT/TiO2 solar cells10.1016/j.solmat.2005.05.020 ↗
59. ITO-free inverted polymer solar cells using a GZO cathode modified by ZnO10.1016/j.solmat.2011.01.011 ↗
60. Indium-free bottom electrodes for inverted organic solar cells with simplified cell architectures10.1063/1.3610997 ↗
61. Effect of textured electrodes with light-trapping on performance of polymer solar cells10.1063/1.4720083 ↗
62. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
63. Top-illuminated organic photovoltaics on a variety of opaque substrates with vapor-printed poly(3,4-ethylenedioxythiophene) top electrodes and MoO3 buffer layer10.1002/aenm.201200112 ↗
64. Stability of the interface between indium–tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
65. Conductivity, morphology, interfacial chemistry, stability of poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate): a photoelectron spectroscopy study10.1002/polb.10659 ↗
66. Blocking reactions between indium-tin oxide and poly(3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
67. 1995
68. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
69. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
70. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
71. Stability of polymer solar cells10.1002/adma.201104187 ↗
72. Effective interfacial layer to enhance efficiency of polymer solar cells via solution-processed fullerene-surfactants10.1039/c2jm30755c ↗