journal article·2021-10Open access

Material selection for solar central receiver tubes

M. Laporte-Azcué, P.A. González-Gómez, M.R. Rodríguez-Sánchez, D. Santana

Abstract

The severe operation conditions and great capital investment of solar power tower central receivers motivate the lifetime analysis of a molten-salt external-cylindrical-tubular receiver, considering five alloy alternatives for its tubes manufacturing: Haynes 230, alloy 316H, Inconel 625, 740H and 800H. An analytical low-computational cost methodology is employed, considering the temperature dependence of tube material properties, elastic-plastic stresses/strains and stress relaxation. Thus, creep and fatigue experimental data available in the literature for these alloys are compiled in this work, providing the coefficients required for the methodology followed. A great alloys operation limitation is the film temperature to avoid corrosion issues; the most permissive are H230, 740H and 800H (650 °C), followed by Inconel 625 (630 °C) and 316H (600 °C). This, and the twice the yield strength, is regarded to set the heliostat field aiming strategy as equatorial as possible for each alloy, resulting in great power production divergences: 24% and 65% less for 625 and alloy 316H receivers with respect to the 740H receiver. Then, the lifetime analysis for a clear design day operation, representative of the receiver during ideal operation, is performed. The stress relaxation regard becomes critical for the accurate damage prediction; alloys 316H and 800H show stress reset during operation, not benefitting from a global stress relaxation. Thus, 800H exhibits a poor endurance. For the clear-day assumption, 740H shows the best lifetime and costs/power performance; the levelized cost of alloy of H230, 625 and alloy 316H is 0.01, 0.09 and over 0.25, respectively, with respect to 740H.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Solar Energy Systems and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. 2019
2. Techno-economic analysis of a hybrid CSP+PV plant integrated with TES and BESS in Northern Chile10.1063/1.5067185 ↗
3. Mehos · 2017 · 1
4. How thermal energy storage enhances the economic viability of concentrating solar power10.1109/JPROC.2011.2144950 ↗
5. The power production operation of solar one, the 10 MWe solar thermal central receiver pilot plant10.1115/1.3268300 ↗
6. Solar power tower - design basis document
7. Pacheco · 2002
8. Litwin · 2002
9. An update on solar central receiver systems, projects, and technologies10.1115/1.1467921 ↗
10. Mehos · 2020
11. 2016
12. 2014
13. 2003
14. ASME Boiler and Pressure Vessel Code
15. American Society of Mechanical Engineers · 2007
16. American Society of Mechanical Engineers · 1980 · vol. 47
17. Babcock · 1984 · vol. 1
18. Grossman
19. Kistler · 1987
20. Berman · 1979
21. Structural design and life assessment of a molten salt solar receiver10.1115/1.3267688 ↗
22. Calculating molten-salt central-receiver lifetime under creep-fatigue damage10.1016/j.solener.2020.11.033 ↗
23. Levelized cost of electricity evaluation of liquid sodium receiver designs through a thermal performance, mechanical reliability, and pressure drop analysis10.1016/j.solener.2018.03.003 ↗
24. Thermal and mechanical analysis of a sodium-cooled solar receiver operating under a novel heliostat aiming point strategy10.1016/j.apenergy.2018.08.113 ↗
25. Life estimation of pressurized-air solar-thermal receiver tubes10.1115/1.4007686 ↗
26. Structural design considerations for tubular power tower receivers operating at 650°C
27. Thermal and structural investigation of tubular supercritical carbon dioxide power tower receivers10.1016/j.solener.2016.05.039 ↗
28. Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: optical and thermal-fluid evaluation10.1016/j.applthermaleng.2016.05.178 ↗
29. INCONEL alloy 625
30. Haynes International · 2020
31. INCONEL alloy 740H
32. Modelling of the receiver transient flux distribution due to cloud passages on a solar tower thermal power plant10.1016/j.solener.2012.10.010 ↗
33. Quick evaluation of the annual heliostat field efficiency10.1016/j.solener.2007.10.007 ↗
34. Thermal design guidelines of solar power towers10.1016/j.applthermaleng.2013.11.014 ↗
35. Deflection and stresses in solar central receivers10.1016/j.solener.2019.11.066 ↗
36. Lifetime analysis of the steam generator of a solar tower plant10.1016/j.applthermaleng.2019.113805 ↗
37. Creep-fatigue life prediction and interaction diagram in nickel-based GH4169 superalloy at 650 °C based on cycle-by-cycle concept10.1016/j.ijfatigue.2016.11.021 ↗
38. Reno · 2012
39. Solar flux distribution on central receivers: a projection method from analytic function10.1016/j.renene.2014.08.016 ↗
40. Aiming factor to flatten the flux distribution on cylindrical receivers10.1016/j.energy.2018.04.002 ↗
41. Comparison of simplified heat transfer models and CFD simulations for molten salt external receiver10.1016/j.applthermaleng.2014.08.072 ↗
42. Exergy analysis of solar central receivers10.1016/j.solener.2020.07.033 ↗
43. Thermal stress and deformation10.1115/1.4011566 ↗
44. Timoshenko · Theory of Elasticity · 1951 · 506
45. Experimental and modeling results of creep-fatigue life of Inconel 617 and Haynes 230 at 850 °c10.1016/j.jnucmat.2012.08.040 ↗
46. Mcmurtrey · 2019
47. Barua · 2020
48. Calculation of inelastic notch-tip strain-stress histories under cyclic loading10.1016/0013-7944(85)90112-2 ↗
49. Calculation of elasto-plastic strains and stresses in notches under multiaxial loading10.1007/BF00032453 ↗
50. Review of creep-fatigue endurance and life prediction of 316 stainless steels10.1016/j.ijpvp.2014.12.002 ↗
51. Elevated temperature shakedown concepts10.1115/1.4003456 ↗
52. American Society of Mechanical Engineers · 2010
53. D.R. Eno, G.A. Young, T.-L. Sham, A unified view of engineering creep parameters, in: ASME (Ed.), ASME Press. Vessel. Pip. Div. Conf. (PVP2008), Chicago, July 27-31, ASME, Chicago, 2008: pp. 777–792. doi:10.1115/pvp2008-61129.10.1115/PVP2008-61129 ↗
54. High temperature strength and multiaxial fatigue life assessment of a tubesheet structure10.1016/j.engfailanal.2016.05.030 ↗
55. Fatigue analysis in pressure vessel design by local strain approach: methods and software requirements10.1115/1.2137770 ↗
56. Levelized cost of energy (LCOE) metric to characterize solar absorber coatings for the CSP industry10.1016/j.renene.2015.06.059 ↗
57. Levelized Cost of Coating (LCOC) for selective absorber materials10.1016/j.solener.2014.05.017 ↗
58. Wade · 1962
59. Scannapieco · 1968
60. Analysis of thermal stress and fatigue fracture for the solar tower molten salt receiver10.1016/j.applthermaleng.2016.01.101 ↗
61. Consideration of thermal embrittlement in alloy 316H for advanced non-light water reactor applications
62. High temperature low cycle fatigue properties of alloy 62510.1016/j.msea.2015.10.023 ↗
63. Kolb · 2011
64. Properties of inconel alloy 740H for high pressure steam and supercritical CO2 applications
65. Steels · Grade data sheet · 2011 · 316 · 316L
66. Fireside corrosion behaviors of inconel 740H superalloy in various SO2 contents
67. Oxidation and hot corrosion behavior of inconel 740H alloy at high temperature
68. Low cycle fatigue behaviour of nickel base superalloy IN 740H at 760 °C: influence of fireside corrosion atmosphere10.1016/j.ijfatigue.2018.07.018 ↗
69. Cunat · 2004
70. Molten nitrate salts at 600 and 680°C: thermophysical property changes and corrosion of high-temperature nickel alloys10.1016/j.solener.2014.01.028 ↗
71. Miliozzi · 2001
72. Bradshaw · 2001
73. 2020
74. Nicol · 2013
75. A method of predicting cyclic stress – strain curve from tensile properties for steels10.1016/j.msea.2012.07.024 ↗
76. Isothermal low-cycle fatigue and fatigue-creep of Haynes 23010.1016/j.ijsolstr.2016.03.011 ↗
77. Maiya · 1980
78. High-temperature low-cycle fatigue of Alloy 800H10.1016/j.ijfatigue.2008.08.002 ↗
79. Mechanisms of high-temperature fatigue failure in alloy 800H10.1007/BF02649752 ↗
80. A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloyTM and HAYNES® 282 alloyTM10.1016/j.msea.2011.03.019 ↗
81. Creep and creep-fatigue deformation and life assessment of Ni-based alloy 740H and Alloy 617
82. A unified view of engineering creep parameters
83. Low cycle fatigue behaviour of HAYNES 230 alloy10.1179/1878641314Y.0000000017 ↗
84. Elevated temperature fatigue-creep behavior of nickel-base superalloy IN 625
85. Research and development of heat-resistant materials for advanced USC power plants with steam temperatures of 700 °C and above10.15302/J-ENG-2015031 ↗
86. Assessment of the time resolution used to estimate the central solar receiver lifetime10.1016/j.apenergy.2021.117451 ↗
87. Activation processes of stress relaxation during hold time in 1Cr – Mo – V steel10.1016/S0921-5093(98)01086-7 ↗
88. Time-dependent strain-controlled fatigue behavior of annealed 2 1/4 Cr-1 Mo steel for use in nuclear steam generator design10.1016/0022-3115(76)90015-5 ↗
89. Effects of prior stress relaxation on the prediction of creep life using time and strain based methods10.1115/1.4023726 ↗
90. Elastic-plastic behaviour of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear-reactor fuel elements10.1243/03093247V023226 ↗
91. Durability of solar absorber coatings and their cost-effectiveness10.1016/j.solmat.2017.03.010 ↗
92. Kelly · 2010