journal article·2020-12

Progress in screen-printed metallization of industrial solar cells with SiOx/poly-Si passivating contacts

Pradeep Padhamnath, Ankit Khanna, Nagarajan Balaji, Vinodh Shanmugam, Naomi Nandakumar, Deng Wang, Qian Sun, Ming Huang, Shumei Huang, Baobing Fan, Bingbing Ding, Armin G. Aberle, Shubham Duttagupta

Publisher page

Abstract

Abstract Solar cells with polysilicon-based passivating and carrier selective contacts are in the nascent stages of industrialization. Advances in commercially available metallization pastes are necessary to further improve the efficiency of industrial polysilicon-based solar cells and approach the best-reported lab efficiency of such cells. In this work, we have analyzed the front and rear screen-printed metallization of large-area n-type monoPolyTM cells with rear-side low-pressure chemical vapor deposited (LPCVD) polysilicon. Metallization pastes specifically optimized for contacting poly-Si layers are used in this work. The metallization is evaluated by studying its impact on the solar cell performance and by further electrical and optical characterization. An efficiency improvement of 0.5% absolute is demonstrated due to improvements in metallization pastes with a 23% champion cell efficiency (cell area: 244.3 cm2, busbarless metallization). An analysis of the fabricated cells indicates that the efficiency is currently limited by recombination at the front surface, both at the passivated and the metallized regions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Efficiency roadmap for evolutionary upgrades of PERC solar cells by TOPCon: impact of parasitic absorption10.1109/JPHOTOV.2019.2957642 ↗
2. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
3. Full wafer size IBC cell with polysilicon passivating contacts
4. Industrial Screen Printed double side contacted POLO cells
5. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
6. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
7. Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
8. Glunz · 2017 · 2064
9. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
10. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
11. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
12. Allen · 2019
13. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗
14. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
15. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
16. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
17. Janssen · 2017
18. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
19. Phosphorus diffused LPCVD polysilicon passivated contacts with in-situ low pressure oxidation10.1016/j.solmat.2018.06.039 ↗
20. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
21. Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts10.1016/j.solmat.2018.12.026 ↗
22. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
23. Effect of the SiO2 interlayer properties with solid-source hydrogenation on passivated contact performance and surface passivation10.1016/j.egypro.2017.09.302 ↗
24. Implementation of n+ and p+ poly junctions on front and rear side of double-side contacted industrial silicon solar cells
25. Detailed analysis and understanding of the transport mechanism of poly-Si-based carrier selective junctions10.1109/JPHOTOV.2019.2943610 ↗
26. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
27. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells
28. Studying dopant diffusion from Poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗
29. Phosphorus-diffused polysilicon contacts for solar cells10.1016/j.solmat.2015.06.001 ↗
30. On the recombination behavior of p + -type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces: on the recombination behavior of p+ -type polysilicon on oxide junctions
31. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
32. Tunnel oxide passivated rear contact for large area n-type front junction silicon solar cells providing excellent carrier selectivity10.3934/matersci.2016.1.180 ↗
33. Development of thin polysilicon layers for application in monoPoly™ cells with screen-printed and fired metallization10.1016/j.solmat.2019.110358 ↗
34. Poly-crystalline silicon-oxide films as carrier-selective passivating contacts for c-Si solar cells10.1063/1.5027547 ↗
35. Optical and electrical characterization of poly-Si/SiOx contacts and their implications on solar cell design10.1016/j.egypro.2017.09.336 ↗
36. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W
37. 2018
38. Feldmann · 2017
39. Approaching 23% with large‐area monoPoly cells using screen‐printed and fired rear passivating contacts fabricated by inline PECVD10.1002/pip.3097 ↗
40. Large area tunnel oxide passivated rear contact n‐type Si solar cells with 21.2% efficiency10.1002/pip.2739 ↗
41. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
42. High-efficiency n-type silicon solar cells with front side boron emitter
43. Towards 22% efficient screen-printed bifacial n -type silicon solar cells10.1016/j.solmat.2018.07.020 ↗
44. Predictive simulation framework for boron diffused p+ layer optimization: sensitivity analysis of boron tube diffusion process parameters of industrial n-type silicon wafer solar cells10.1016/j.solmat.2018.09.019 ↗
45. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
46. Metallization‒induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
47. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
48. Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombination10.1109/JPHOTOV.2016.2591318 ↗
49. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
50. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
51. Screen-printed metallization for p-type poly-Si passivated contacts formed by LPCVD
52. Metallisation of boron‐doped polysilicon layers by screen printed silver pastes10.1002/pssr.201700334 ↗
53. Screen printed, large area bifacial N-type back junction silicon solar cells with selective phosphorus front surface field and boron doped poly-Si/SiOx passivated rear emitter10.1063/1.5059559 ↗
54. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
55. Campos · 2011
56. Solar cell contact resistance — a review10.1109/T-ED.1984.21583 ↗
57. Quasi-steady-state photoconductance, a new method for solar cell material and device characterization
58. Measurement of the emitter saturation current by a contactless photoconductivity decay method
59. Sinton · 2000 · 1152
60. Wong · 2013 · 933
61. Griddler 2: two dimensional solar cell simulator with facile definition of spatial distribution in cell parameters and bifacial calculation mode
62. Determination of metal contact recombination parameters for silicon wafer solar cells by photoluminescence imaging10.1016/j.solener.2015.05.010 ↗
63. Efficiency improvements of silicon solar cells by the impurity photovoltaic effect10.1063/1.356025 ↗
64. Double screen printed metallization of crystalline silicon solar cells as low as 30μm metal line width for mass production10.1016/j.solmat.2012.01.018 ↗
65. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
66. Duerinckx · 2004 · 443
67. Analysis of contact recombination at rear local back surface field via boron laser doping and screen-printed aluminum metallization on p-type PERC solar cells10.1016/j.egypro.2017.09.256 ↗
68. R. Dumbrell, M.K. Juhl, M. Li, T. Trupke, Z. Hameiri, Metal induced contact recombination measured by quasi-steady-state photoluminescence, in, IEEE, pp. 3315-3318.10.1109/PVSC.2017.8366451 ↗
69. Impact of screen printing silver paste components on the space charge region recombination losses of industrial silicon solar cells10.1016/j.solmat.2012.06.040 ↗
70. Understanding metal induced recombination losses in silicon solar cells with screen printed silver contacts10.1016/j.egypro.2016.10.077 ↗