Hydroxyl group functionalized graphene oxide nanosheets as additive for improved erythritol latent heat storage performance: A comprehensive evaluation on the benefits and challenges
Source abstract
Abstract
Abstract Graphene oxide (GO) nanosheets were employed as the additive to make composites of erythritol, a promising medium-temperature PCM candidate. GO nanosheets modified with hydroxyl groups were applied to improve the dispersion stability of the composites. A systematic characterization on the latent heat storage performance was performed for both pure and composite erythritol, in order to identify the benefits and challenges of the composites. It was found that the thermal conductivity is increased by nearly twice and the degree of supercooling was lowered from ~64 °C to ~48 °C at the loading of 1.0 wt% GO nanosheets (the maximum loading tested). The addition of GO nanosheets also leads to an increase of the retrievable latent heat during crystallization, from ~187 kJ/kg to ~225 kJ/kg at the same loading, by increasing the crystallinity. However, the introduction of GO nanosheets can also lead to a rise in the dynamic viscosity of erythritol. As a result, the crystallization rate is slowed down and accordingly, the duration of crystallization becomes 62% longer when the loading reaches 1.0 wt%. In addition, favorable dispersion stability of the erythritol composites is observed, and their melting point (~117 °C) remains almost unchanged during 50 melting-crystallization cycles. Functionalized GO nanosheets have been shown to be an efficient additive for improving the performance of erythritol, but a trade-off analysis on the loading would be required to achieve the best overall performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Dyeing and Modifying Textile Fibers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Thermal energy storage for low and medium temperature applications using phase change materials–a review10.1016/j.apenergy.2016.05.097 ↗
2. Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: a review to recent developments10.1016/j.apenergy.2015.09.016 ↗
3. Thermal energy storage (TES) for industrial waste heat (IWH) recovery: a review10.1016/j.apenergy.2016.06.147 ↗
4. Application of TCE-PCM based heat sinks for cooling of electronic components: a review10.1016/j.rser.2015.12.238 ↗
5. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
6. Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: a review10.1016/j.rser.2017.05.271 ↗
7. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
8. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
9. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
10. New sugar alcohols mixtures for long-term thermal energy storage applications at temperatures between 70 °C and 100 °C10.1016/j.solmat.2016.06.048 ↗
11. Eutectic mixtures of sugar alcohols for thermal energy storage in the 50–90 °C temperature range10.1016/j.solmat.2014.11.050 ↗
12. Evaluation and comparison of erythritol-based composites with addition of expanded graphite and carbon nanotubes10.1016/j.apenergy.2017.08.046 ↗
13. Preparation and thermal properties of short carbon fibers/erythritol phase change materials10.1016/j.enconman.2017.01.023 ↗
14. The effects of modified carbon nanotubes on the thermal properties of erythritol as phase change materials10.1016/j.enconman.2017.11.072 ↗
15. Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles10.1016/j.applthermaleng.2012.05.033 ↗
16. Thermal characterization of erythritol/expanded graphite composites for high thermal storage capacity10.1016/j.carbon.2013.09.053 ↗
17. Effects of exfoliated graphite on the thermal properties of erythritol-based composites used as phase-change materials10.1016/j.compositesb.2016.04.033 ↗
18. Thermal conductivity enhancement of erythritol phase change material with percolated aluminum filler10.1016/j.matchemphys.2019.02.033 ↗
19. Characterisation and thermophysical properties of graphene nanoparticles dispersed erythritol PCM for medium temperature thermal energy storage applications10.1016/j.tca.2019.03.037 ↗
20. Novel microstructured polyol–polystyrene composites for seasonal heat storage10.1016/j.apenergy.2016.03.023 ↗
21. Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature latent heat storage. (Ⅰ): non-isothermal melting and crystallization behaviors10.1016/j.energy.2018.07.081 ↗
22. Polyols as phase change materials for surplus thermal energy storage10.1016/j.apenergy.2015.03.064 ↗
23. Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature latent heat storage. (Ⅱ): isothermal melting and crystallization behaviors10.1016/j.energy.2019.05.109 ↗
24. Effects of supercooling degree and specimen size on supercooling duration of erythritol10.2355/isijinternational.54.2790 ↗
25. Effects of some nucleating agents on the supercooling of erythritol to be applied as phase change material10.1007/s10973-017-6296-2 ↗
26. Supercooling study of erythritol/EG composite phase change materials10.1016/j.egypro.2019.01.744 ↗
27. Relaxation of supercooling of erythritol for latent heat storage10.1252/jcej.34.376 ↗
28. Supercooling suppression and thermal behavior improvement of erythritol as phase change material for thermal energy storage10.1016/j.solmat.2017.06.027 ↗
29. Experimental study on the thermal storage performance and non-isothermal crystallization kinetics of pentaerythritol blended with low melting metal10.1016/j.tca.2018.02.007 ↗
30. Nucleation triggering methods in supercooled phase change materials (PCM), a review10.1016/j.tca.2018.10.009 ↗
31. Applicability for heat storage of binary systems of neopentylglycol, pentaglycerine and pentaerythritol: a comparative analysis10.1016/0165-1633(88)90051-2 ↗
32. Supercooling of phase-change materials and the techniques used to mitigate the phenomenon10.1016/j.apenergy.2019.02.045 ↗
33. A review on supercooling of Phase Change Materials in thermal energy storage systems10.1016/j.rser.2016.11.272 ↗
34. A eutectic mixture of galactitol and mannitol as a phase change material for latent heat storage10.1016/j.enconman.2015.06.013 ↗
35. Heterogeneous nucleation or homogeneous nucleation?10.1063/1.481644 ↗
36. Experimental analysis of heterogeneous nucleation in undercooled melts by infrared thermography10.1080/17686733.2015.1031987 ↗
37. Preparation and characterization of erythritol/graphene oxide shape‐stable composites with improved thermal‐physical property
38. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)10.1016/j.rser.2009.10.015 ↗
39. Viscosity of nanofluids: a review of recent experimental studies10.1016/j.icheatmasstransfer.2016.02.005 ↗
40. Rheological behaviour of nanofluids: a review10.1016/j.rser.2015.09.033 ↗
41. Preparation and enhanced heat capacity of nano-titania doped erythritol as phase change material10.1016/j.ijheatmasstransfer.2014.09.069 ↗
42. Rheological behaviors of sugar alcohols for low-to-medium temperature latent heat storage: effects of temperature in both the molten and supercooled liquid states10.1016/j.solmat.2019.03.006 ↗
43. Preparation of erythritol–graphite foam phase change composite with enhanced thermal conductivity for thermal energy storage applications10.1016/j.carbon.2015.06.075 ↗
44. Phase change composite based on porous nickel and erythritol10.1016/j.applthermaleng.2012.02.033 ↗
45. Describing the uncertainties in experimental results10.1016/0894-1777(88)90043-X ↗
46. Uncertainty analysis for measurement of measurand10.1016/j.measurement.2010.07.001 ↗
47. Novel sugar alcohol/carbonized kapok fiber composites as form-stable phase-change materials with exceptionally high latent heat for thermal energy storage10.1021/acsomega.8b03373 ↗
48. Polyethylene glycol based shape-stabilized phase change material for thermal energy storage with ultra-low content of graphene oxide10.1016/j.solmat.2014.01.024 ↗
49. Poly (vinyl alcohol)–graphene oxide nanohybrid “pore-filling” membrane for pervaporation of toluene/n-heptane mixtures10.1016/j.memsci.2013.12.023 ↗
50. Heat collection and supply of interconnected netlike graphene/polyethyleneglycol composites for thermoelectric devices10.1039/C5NR02051D ↗
51. A review of nanofluid stability properties and characterization in stationary conditions10.1016/j.ijheatmasstransfer.2011.04.014 ↗
52. Increased thermal conductivity of liquid paraffin-based suspensions in the presence of carbon nano-additives of various sizes and shapes10.1016/j.carbon.2012.10.059 ↗
53. Slow molecular mobility in the crystalline and amorphous solid states of pentitols: a study by thermally stimulated depolarisation currents and by differential scanning calorimetry10.1016/j.carres.2007.01.016 ↗
54. Experimental and in silico characterization of xylitol as seasonal heat storage material10.1016/j.fluid.2016.12.020 ↗
55. Crystal growth from the melt: a review
56. Analysis of crystal growth kinetics in undercooled melts by infrared thermography10.1080/17686733.2015.1066133 ↗
57. Preparation and melting/freezing characteristics of cu/paraffin nanofluid as phase-change material (PCM)10.1021/ef9013967 ↗
58. Nanofluid PCMs for thermal energy storage: latent heat reduction mechanisms and a numerical study of effective thermal storage performance10.1016/j.ijheatmasstransfer.2014.07.051 ↗
59. Specific heat control of nanofluids: a critical review10.1016/j.ijthermalsci.2016.03.024 ↗
60. Myo-Inositol based nano-PCM for solar thermal energy storage10.1016/j.applthermaleng.2016.08.202 ↗
61. Corrosion assessment of myo-inositol sugar alcohol as a phase change material in storage systems connected to fresnel solar plants10.3390/molecules24071383 ↗