Efficient Sb2Se3/CdS planar heterojunction solar cells in substrate configuration with (hk0) oriented Sb2Se3 thin films
Source abstract
Abstract
This work has been published in Solar Energy Materials & Solar Cells 215 (2020) 110603 (DOI: 10.1016/j.solmat.2020.110603). Antimony selenide (Sb2Se3) based solar cell technology has experienced rapid development with demonstrated cell efficiency reaching ̴ 9.2% for devices with substrate configuration, hence necessitating more intense research investigation for further progress. Though the effect of crystallographic orientation in this non-cubic material on device performance is now well understood, the influence of composition and intrinsic defects remains debatable. In this work we describe the fabrication and device characteristics of Sb2Se3 solar cells designed in the substrate configuration of (SLG/Mo/Sb2Se3/CdS/i-ZnO+ITO). Notably, Sb2Se3 absorber layers with predominant (hk0) orientation were deposited in a single step by e-beam evaporation of pre synthesized bulk source material. As grown precursor Sb2Se3 thin films were subjected to reactive thermal annealing (RTA) treatment in the presence of Se source at different temperatures for enhancing their crystalline quality and balancing their stoichiometry. Analysis of the completed solar cells indicated improved efficiencies post RTA process, with the best performing devices exhibiting a power conversion efficiency (η) of ~ 4.34% for an absorber annealed at a temperature of 350 °C. The improved efficiency is ascribed to the observed changes in chemical composition of the absorber layer and the possible formation of related beneficial antisite defects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Enhancing the efficiency of SnS solar cells via band-offset engineering with a zinc oxysulfide buffer layer10.1063/1.4789855 ↗
2. Evaluation of AA-CVD deposited phase pure polymorphs of SnS for thin films solar cells10.1039/C9RA01938C ↗
3. Multiwavelength excitation Raman scattering study of Sb2Se3 compound: fundamental vibrational properties and secondary phases detection10.1088/2053-1583/ab4029 ↗
4. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
5. Exploring the PbS-Bi2S3 series for next generation energy conversion materials10.1021/acs.chemmater.7b00628 ↗
6. Non-cubic solar cell materials
7. 9.2%-Efficient core-shell structured antimony selenide nanorod array solar cells
8. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
9. Chen · 2017 · 3
10. Thermal evaporation and characterization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
11. Zhou · 2014 · 1
12. Wang · 2015
13. Liu · 2015 · 1828
14. Selenization of Sb2Se3 absorber layer: an efficient step to improve device performance of CdS/Sb2Se3 solar cells10.1063/1.4894170 ↗
15. Rapid thermal process to fabricate Sb2Se3 thin film for solar cell application10.1016/j.solener.2016.08.020 ↗
16. Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization10.1016/j.solmat.2016.11.033 ↗
17. Magnetron sputtered ZnO buffer layer for Sb2Se3 thin fi lm solar cells10.1016/j.solmat.2017.07.014 ↗
18. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
19. Chen · 2018
20. Improvement in Sb2Se3 solar cell effi ciency through band Alignment engineering at the buffer/absorber interface10.1021/acsami.8b17611 ↗
21. Liu · 2017
22. Mechanochemical bulk synthesis and e-beam growth of thin films of Sb2Se3 photovoltaic absorber10.1016/j.solener.2017.11.074 ↗
23. Revealing the beneficial effects of Ge doping on Cu2ZnSnSe4 thin film solar cells10.1039/C8TA02551G ↗
24. Raman scattering analysis of the surface chemistry of kesterites: impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
25. The Sb-Se (antimony-selenium) system10.1007/BF02667889 ↗
26. Efficiency enhancement of Sb2Se3 thin-film solar cells by the co-evaporation of Se and Sb2Se3
27. Voc boosting and grain growth enhancing Ge-doping strategy for Cu2ZnSnSe4 photovoltaic absorbers10.1021/acs.jpcc.6b02315 ↗
28. Chemical elaboration of well defined Cu(In,Ga)Se2 surfaces after aqueous oxidation etching10.1016/S0022-3697(03)00201-4 ↗
29. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
30. Complicated and unconventional defect properties of the quasi- one-dimensional photovoltaic semiconductor Sb2Se310.1021/acsami.9b01220 ↗