High temperature optically stable spectrally-selective Ti1xAlxN-based multilayer coating for concentrated solar thermal applications
Source abstract
Abstract
Abstract Spectrally-selective solar absorbing coatings based on the Ti1-xAlxN system were deposited using DC magnetron sputtering. Due to their refractory nature and very suitable optical properties, these were considered for high temperature solar thermal energy conversion. The composition of Ti1-xAlxN, (effectively, the Ti/Al ratio) was optimized to achieve a maximized solar absorptance. The optimum composition was then tested in a tandem absorber which included anti-reflective layers. A stainless steel substrate was used in order to simulate service in parabolic trough-based power plants that use stainless steel pipe to carry the heat-transfer fluid. High temperature annealing of the stack caused structural modifications but the solar absorptance of 92% was retained even after annealing at 900 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Thin-Film Transistor Technologies · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
2. The spectral selective absorbing characteristics and thermal stability of SS/TiAlN/TiAlSiN/Si3N4 tandem absorber prepared by magnetron sputtering10.1016/j.solener.2014.11.005 ↗
3. Enhanced optical properties of TiN-based spectrally selective solar absorbers deposited at a high substrate temperature10.1016/j.solmat.2017.01.023 ↗
4. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
5. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
6. Functional multi-layer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗
7. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
8. Effects of environmental and operational variability on the spectrally selective properties of W/WAlN/WAlON/Al2O3-based solar absorber coating10.1016/j.solmat.2018.04.020 ↗
9. Multi-layer solar selective absorber coatings based on W/WSiAlNx/WSiAlOyNxSiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
10. Effects of volume mismatch and electronic structure on the decomposition of ScAlN and TiAlN solid solutions10.1103/PhysRevB.81.224101 ↗
11. Behaviors of residual stress and high-temperature fatigue life in ceramic coatings produced by PVD10.1016/S0921-5093(02)00327-1 ↗
12. Interrelationship between processing, coatingproperties and functional properties of steered arc physically vapour deposited (Ti, AI) N and (Ti, Nb) N coatings10.1016/S0040-6090(05)80064-1 ↗
13. Titanium aluminum nitride films: a new alternative to TiN coatings10.1116/1.573713 ↗
14. Microstructure, oxidation and H2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique10.1016/j.surfcoat.2003.10.021 ↗
15. Phase stability and elasticity of TiAlN10.3390/ma4091599 ↗
16. Thermal stability of arc evaporated high aluminum-content Ti1− xAlx N thin films10.1116/1.1503784 ↗
17. Corrosion of CrN and TiAlN coatings in chloride-containing atmospheres10.1016/S0257-8972(99)00270-4 ↗
18. Gunther · 2011
19. Efficiency of GaInAs thermophotovoltaic cells: the effects of incident radiation, light trapping and recombinations10.1364/OE.23.0A1208 ↗
20. A novel non-selective coating material for solar thermal potential application formed by reaction between sol–gel titania and copper manganese spinel10.1016/j.solmat.2013.08.004 ↗