journal article·2019-09Open access

Infrared emissivity of copper-alloyed spinel black coatings for concentrated solar power systems

I. González de Arrieta, T. Echániz, R. Fuente, E. Rubin, R. Chen, J.M. Igartua, M.J. Tello, G.A. López

Abstract

The directional spectral emissivities of four new copper-alloyed spinel coatings for concentrated solar power applications were measured up to 800 °C and compared Pyromark 2500®, deposited in the same conditions on Inconel 625. Reproducible results were found for all coatings at all temperatures, with similar spectral features at working temperatures. The temperature and angular dependences are related to the morphology and composition of the samples. The total hemispherical emissivity increases up to 400 °C for all coatings and then stabilizes, with similar values for most materials, except for the porous Cu0.5Cr1.1Mn1.4O4 coating. This coating offers a reduced total hemispherical emissivity due to increased semitransparency at high angles arising from its porosity. This porosity is linked to an increase in both the solar absorptance and the emissivity in the normal direction due to enhanced light trapping, which means that this coating shows signs of directional selectivity. These results, together with the data dispersion reported for Pyromark, suggest that structural properties are key for the high-temperature emissivity of the coatings and highlight the importance of direct emissivity characterization. Combined with absorptance measurements, these emissivity measurements allow for accurate calculations of the high-temperature efficiencies of the coatings, which reach values up to 0.929.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Thermal energy storage systems for concentrated solar power plants10.1016/j.rser.2017.03.139 ↗
2. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
3. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
4. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power10.1016/j.nanoen.2014.06.016 ↗
5. Optical properties of ZrB2 porous architectures10.1016/j.solmat.2015.09.068 ↗
6. Experimental methods for the preparation of selectively absorbing textured surfaces for photothermal solar conversion10.1016/0165-1633(80)90028-3 ↗
7. Durability of solar absorber coatings and their cost-effectiveness10.1016/j.solmat.2017.03.010 ↗
8. Mehos · 2017
9. Copper-alloyed spinel black oxides and tandem-structured solar absorbing layers for high-temperature concentrating solar power systems10.1016/j.solener.2016.03.007 ↗
10. Optical properties and thermal stability of Cu spinel oxide nanoparticle solar absorber coatings10.1016/j.solmat.2019.02.032 ↗
11. First spectral emissivity study of a solar selective coating in the 150-600 °C temperature range10.1016/j.solmat.2013.07.002 ↗
12. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating10.1016/j.solmat.2015.04.009 ↗
13. Effects of environmental and operational variability on the spectrally selective properties of W/WAlN/WAlON/Al2O3-based solar absorber coating10.1016/j.solmat.2018.04.020 ↗
14. Emissivity measurements for Nextel velvet coating 811-21 between -36 °C and 82 °C10.1068/htwu385 ↗
15. Emissivity reference paints for high temperature applications10.1016/j.measurement.2007.10.007 ↗
16. Bilateral intercomparison of spectral directional emissivity measurement between CENAM and PTB10.1007/s10765-014-1686-1 ↗
17. High-accuracy emissivity data on the coatings Nextel 811-21, Herberts 1534, aeroglaze Z306 and acktar fractal black10.1007/s10765-017-2212-z ↗
18. New experimental device for high-temperature normal spectral emissivity measurements of coatings10.1088/0957-0233/25/9/095501 ↗
19. Uncertainty determination in high-temperature spectral emissivity measurement method of coatings10.1016/j.applthermaleng.2017.06.022 ↗
20. Effects of surface optical and radiative properties on the thermal performance of a solar cavity receiver10.1016/j.solener.2018.06.075 ↗
21. Uncertainty analysis for emissivity measurement at elevated temperatures with an infrared camera10.1007/s10765-015-2022-0 ↗
22. Characterization of Pyromark 2500 paint for high-temperature solar receivers10.1115/1.4024031 ↗
23. Suo-Anttila · 2004
24. Optical properties of Pyromark 2500 coatings of variable thicknesses on a range of materials for concentrating solar thermal applications
25. Black oxide nanoparticles as durable solar absorbing material for high-temperature concentrating solar power system10.1016/j.solmat.2014.12.004 ↗
26. Products obtained during combustion of polymers under simulated incinerator conditions: II. Polystyrene10.1016/S0021-9673(01)90737-X ↗
27. New experimental device for infrared spectral directional emissivity measurements in a controlled environment10.1063/1.2393157 ↗
28. Analysis of the accuracy of methods for the direct measurement of emissivity10.1007/s10765-008-0402-4 ↗
29. Analysis of calibration methods for direct emissivity measurements10.1364/AO.49.002728 ↗
30. Combined standard uncertainty in direct emissivity measurements10.1063/1.3431541 ↗
31. IR radiometer sensitivity and accuracy improvement by eliminating spurious radiation for emissivity measurements on highly specular samples in the 2–25 μm spectral range10.1016/j.measurement.2017.06.010 ↗
32. Siegel · 1992
33. Modest · 2003
34. The determination of the uncertainties of spectral emissivity measurements in air at the PTB10.1088/0026-1394/47/2/S14 ↗
35. Emissivity measurements on aeronautical alloys10.1016/j.jallcom.2009.09.091 ↗
36. Optical constants of silica glass from extreme ultraviolet to far infrared at near room temperature10.1364/AO.46.008118 ↗
37. Tuning the spectral emittance of a-SiC open-cell foams up to 1300 K with their macro porosity10.1063/1.4955142 ↗
38. Thermal radiative properties of complex media: theoretical prediction versus experimental identification10.1080/01457632.2011.525140 ↗
39. Directional spectral emittance of a packed bed: correlation between theoretical prediction and experimental data10.1115/1.1338134 ↗
40. Tomography-based analysis of apparent directional spectral emissivity of high-porosity nickel foams10.1016/j.ijheatmasstransfer.2017.11.005 ↗
41. Total hemispherical apparent radiative properties of the infinite V-groove with specular reflection10.1016/j.ijheatmasstransfer.2018.03.041 ↗
42. Thermal radiation from metal surfaces10.1364/JOSA.68.001505 ↗
43. Calorimetric and transport properties of zircalloy 2, zircalloy 4, and Inconel 62510.1007/BF01563797 ↗
44. Total hemispherical emissivity of Inconel 71810.1016/j.nucengdes.2015.02.018 ↗
45. Total hemispherical emissivity of oxidized Inconel 718 in the temperature range 300-1000 °C10.1016/S0894-1777(00)00021-2 ↗
46. Spectrally and angularly selective photothermal and photovoltaic converters under one-sun illumination10.1088/0022-3727/38/13/014 ↗
47. Theoretical efficiencies of angular-selective non-concentrating solar thermal systems10.1016/j.solener.2004.01.005 ↗
48. Angular photonic band gap10.1103/PhysRevA.83.035806 ↗
49. Optical broadband angular selectivity10.1126/science.1249799 ↗
50. Improving solar cell efficiency using photonic band-gap materials10.1016/j.solmat.2007.05.001 ↗
51. Directional selectivity, emittance, and absorptance properties of vee corrugated specular surfaces10.1016/0038-092X(63)90036-7 ↗
52. Optical cavity for improved performance of solar receivers in solar-thermal systems10.1016/j.solener.2014.06.023 ↗
53. Enhanced absorption of thin-film photovoltaic cells using an optical cavity10.1088/2040-8978/17/5/055901 ↗
54. Plasmonic metasurface for directional and frequency-selective thermal emission10.1103/PhysRevApplied.4.014023 ↗
55. Thermophotovoltaics with spectral and angular selective doped-oxide thermal emitters10.1364/OE.25.00A880 ↗
56. Highly efficient selective metamaterial absorber for high-temperature solar thermal energy harvesting10.1016/j.solmat.2015.02.019 ↗
57. Study of the aging of a solar absorber material following the evolution of its thermoradiative and thermophysical properties
58. Koltun · 1981 · 118