High performance aperiodic metal-dielectric multilayer stacks for solar energy thermal conversion
Source abstract
Abstract
Abstract A novel spectrally selective Cr/AlCrN/AlCrNO/AlCrN/AlCrNO/AlCrO multilayer coating was deposited on stainless steel substrates using cathodic arc ion plating. In this tandem absorber coating, Cr, AlCrN, AlCrNO and AlCrO act as the reflector layer, semi-absorbing layer, the main absorbing layer and the antireflection layer, respectively. The spectral properties of this multilayer coating during long-term annealing in air have been investigated with the aim of evaluating the thermal stability of this aperiodic metal-dielectric multilayer stacks. An average absorptance of 0.90 and emittance of 0.15 are achieved in this multilayer coatings fabricated with optimized parameters. More importantly, the coating exhibits an outstanding thermal stability with a selectivity of 0.94/0.11 even after annealed at 500 °C for 1000 h in air. The microstructure analysis indicate that the multilayer coating consists of aperiodic AlCrN and AlCrON layers in addition to the Cr and AlCrO layers. After the long-term annealing, small amounts of AlN, CrN and Cr2N nanocrystallites are observed to be homogeneously embedded in the AlCrN and AlCrON amorphous matrices. The nanoparticles in the AlCrN and AlCrON layers can effectively scatter the incident light into a broadband wavelength range, increasing the optical path length in the absorbing layers and thus resulting in a pronounced enhancement in the absorptivity. A handful of Cr2O3 and Al2O3 nanograins are observed to embedd in the amorphous AlCrO antireflection layer, which can efficitively reflect the solar infrared radiation and the thermal emittance from the substrate and thus result in pretty low infrared emissivity. The good thermal stability is attributed to the excellent thermal stability of the cermet-based amorphous matrices and the sluggish atomic diffusion in the nanoparticles, which could effectively slow down the inward diffusion of oxygen and avoid agglomeration of naonparticles. These results suggest that the AlCrON-based selective absorbing coating is a good candidate for photo-thermal conversion at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Multi-layer solar selective absorber coatings based on W/WSiAlNx /WSiAlOyNx/SiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
2. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
3. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
4. Large-scale nanophotonic solar selective absorbers for high-efficiency solar thermal energy conversion10.1002/adma.201501686 ↗
5. Coatings for concentrating solar systems – a review10.1016/j.rser.2015.01.015 ↗
6. High performance solar-selective absorbers using coated sub-wavelength gratings10.1364/OE.18.005525 ↗
7. Design of high-temperature solar-selective coatings for application in solar collectors10.1016/j.solmat.2017.05.056 ↗
8. Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks10.1364/OE.17.022800 ↗
9. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
10. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power10.1016/j.nanoen.2014.06.016 ↗
11. Optimizing analysis of W-AlN cermet solar absorbing coatings10.1088/0022-3727/34/21/303 ↗
12. Effects of environmental and operational variability on the spectrally selective properties of W/WAlN/WAlON/Al2O3-based solar absorber coating10.1016/j.solmat.2018.04.020 ↗
13. Novel Mo-Si3N4 based selective coating for high temperature concentrating solar power applications10.1016/j.solmat.2013.12.005 ↗
14. MoSi2-Si3N4 absorber for high temperature solar selective coating10.1016/j.solmat.2016.04.001 ↗
15. Aqueous solution-chemical derived Ni-Al2O3 solar selective absorbing coatings10.1016/j.solmat.2012.05.030 ↗
16. Enhanced optical properties of TiN-based spectrally selective solar absorbers deposited at a high substrate temperature10.1016/j.solmat.2017.01.023 ↗
17. The influence of oxygen in TiAlOxNy on the optical properties of colored solar-absorbing coatings10.1016/j.solmat.2011.11.001 ↗
18. Microstructure, oxidation and H2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique10.1016/j.surfcoat.2003.10.021 ↗
19. Corrosion behavior of TiN, TiAlN, TiAlSiN thin films deposited on tool steel in the 3.5 wt% NaCl solution10.1016/j.tsf.2007.08.069 ↗
20. Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3- Based nanostructured multilayer absorber coating through graded optical constants10.1016/j.solmat.2017.11.013 ↗
21. Spectral properties and thermal stability of CrN/CrON/Al2O3 spectrally selective coating10.1016/j.tsf.2016.06.055 ↗
22. Functional multi-layer solar spectral selective absorbing coatings of AlCrSiN/AlCrSiON/AlCrO for high temperature applications10.1016/j.solmat.2016.04.007 ↗
23. A new solar spectral selective absorbing coating of SS-(Fe3O4)/Mo/TiZrN/TiZrON/SiON for high temperature application10.1016/j.solmat.2014.04.014 ↗
24. Structure and thermal stability of spectrally selective absorber based on AlCrON coating for solar-thermal conversion applications10.1016/j.solmat.2016.05.035 ↗
25. , Long-term thermal stability of CrAlO-based solar selective absorbing coating in elevated temperature air10.1016/j.solmat.2014.12.009 ↗
26. A novel design in composities of various materials for solar selective coatings10.1016/S0927-0248(01)00108-8 ↗
27. Fabrication, spectral properties and thermal stability of AlCrON solar selective absorbing coating10.1179/1432891714Z.000000000665 ↗
28. Spectrally selective CrMoN/CrON tandem absorber for mid-temperature solar thermal applications10.1016/j.solmat.2012.10.003 ↗
29. Sputtered Cr and reactively sputtered CrNx serving as barrier layers against copper diffusion10.1149/1.1838953 ↗
30. A study of the oxidation behavior of CrN and CrAlN thin films in air using DSC and TGA analyses10.1016/j.surfcoat.2007.11.037 ↗
31. Oxidation studies of CrAlON nanolayered coatings on steel plates10.1016/j.surfcoat.2006.02.053 ↗
32. Structural and mechanical properties of Cr-Al-O-N thin films grown by cathodic arc deposition10.1016/j.actamat.2012.08.010 ↗
33. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
34. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
35. Thermal aging test of AlCrNO-based solar selective absorbing coatings prepared by cathodic arc plating10.1016/j.solmat.2015.01.015 ↗
36. Accelerated life testing of solar absorber coatings: testing procedure and results10.1016/S0038-092X(00)00034-7 ↗
37. Quantitative local profile analysis of nanomaterials by electron diffraction10.1016/j.scriptamat.2010.04.019 ↗
38. 〈http://www.univie.ac.at/pasad〉, in.
39. Enhanced thermal stability and spectral selectivity of SS/TiC-Y/Al2O3 spectrally selective solar absorber by thermal annealing10.1016/j.solener.2016.10.046 ↗