A new member of solar heat-reflective pigments: BaTiO3 and its effect on the cooling properties of ASA (acrylonitrile-styrene-acrylate copolymer)
Source abstract
Abstract
Abstract Although barium titanate (BaTiO3, BT) has been extensively used in manufacturing electronic materials, less attention has been paid to the area of cool material. Herein, BT was first used as solar heat-reflective pigment, aiming to be possibly applied in cool roof for cooling purpose. Specifically, four types of BT with different particle size were added into acrylonitrile-styrene-acrylate copolymer (ASA) matrix to fabricate composite cool materials. The solar reflectance and cooling effect were investigated by ultraviolet-visible-near infrared (UV–Vis–NIR) spectral measurement and temperature test, respectively. The results of the solar spectral measurement suggested that the addition of BT particles significantly improved NIR reflectance of ASA by 2–3 times. Besides, the total solar reflectance firstly increased with the increasing average particle size up to 406 nm and then leveled off. Meanwhile, a significant decrease (about 10 °C) was achieved in the indoor temperature test when BT particles were introduced. As for the outdoor temperature test, the final temperature of ASA/BT (406 nm) and ASA/BT (1068 nm) was different though their solar reflectance values were close, indicating that the temperature test was a great complementary instrument of the solar spectral measurement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Heat Island Mitigation · Building Energy and Comfort Optimization · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. A review of solar thermal technologies10.1016/j.rser.2009.07.014 ↗
2. A review on global solar energy policy10.1016/j.rser.2011.01.007 ↗
3. Using a novel and easy-to-use sandwich structure device to evaluate the cooling properties of cool materials10.1080/1023666X.2015.1051406 ↗
4. Air-conditioning energy consumption due to green roofs with different building thermal insulation10.1016/j.apenergy.2014.04.055 ↗
5. Interaction between urban microclimate and electric air-conditioning energy consumption during high temperature season10.1016/j.apenergy.2013.11.057 ↗
6. Experimental research on a novel energy efficiency roof coupled with PCM and cool materials10.1016/j.enbuild.2016.05.080 ↗
7. Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions10.1016/j.solener.2010.12.023 ↗
8. The effects of particle size distribution on the optical properties of titanium dioxide rutile pigments and their applications in cool non-white coatings10.1016/j.solmat.2014.06.035 ↗
9. Near IR reflectance characteristics of PMMA/ZnO nanocomposites for solar thermal control interface films10.1016/j.solmat.2014.02.033 ↗
10. The Role of epoxy matrix occlusions within BaTiO3 nanoparticles on the dielectric properties of functionalized BaTiO3/epoxy nanocomposites10.1016/j.compositesa.2016.08.018 ↗
11. Improving piezoelectric performance of lead-free polymer composites with high aspect ratio BaTiO3 nanowires10.1016/j.polymertesting.2016.05.018 ↗
12. Field enhanced bulk conductivity of BaTiO3: Mg ceramics10.1039/c0jm00677g ↗
13. A facial one-pot route synthesis and characterization of Y-stabilized Sb2O3 solar reflective thermal insulating coatings10.1016/j.matchemphys.2011.07.015 ↗
14. Near-infrared reflective properties of perylene derivatives10.1016/j.dyepig.2011.06.011 ↗
15. Near Infrared Reflectance Properties of Metal Oxide Nanoparticles10.1021/jp066363o ↗
16. Kortuem · 1969
17. TiO2 Nanocrystalline pigmented polyethylene foils for radiative cooling applications: synthesis and characterization10.1021/la010370g ↗
18. Transparent and heat-insulation plasticized polyvinyl chloride (PVC) thin film with solar spectrally selective property10.1016/j.solmat.2016.02.016 ↗
19. Semiconductor surface properties deduced from free carrier absorption and reflection of infrared radiation10.1016/0022-3697(60)90208-0 ↗
20. M. Tobise Light emitting device. US 8097893 B2, 2012.
21. Effect of ferroelectricity on solar-light-driven photocatalytic activity of BaTiO3-Influence on the carrier separation and stern layer formation10.1021/cm402092f ↗
22. Influence of chlorosulfonated polyethylene network structure on poly(acrylonitrile-styrene-acrylate)/poly(α-methylstyrene-acrylonitrile) blends: mechanical properties, morphologies, glass transition behavior and heat resistance
23. Highly toughened poly (acrylonitrile–styrene–acrylic)/chlorinated polyethylene blends: mechanical, rheological and thermal properties10.1016/j.polymertesting.2015.03.017 ↗
24. J.S. Bloom, J.D. Connolly Polymer-based products having improved solar reflectivity and UV protection. US 20110151163 A1, 2011.
25. E. Santi, Multilayer coextruded plastics roofing sheets with an upper layer of poly(acrylonitrile-styrene-acrylate). EP 1886808 A1, 2008.
26. Optical properties across the solar spectrum and indoor thermal performance of cool white coatings for building energy efficiency10.1016/j.enbuild.2013.03.051 ↗
27. Effect of titanium dioxide (TiO2) on largely improving solar reflectance and cooling property of high density polyethylene (HDPE) by influencing its crystallization behavior10.1016/j.jallcom.2014.07.191 ↗
28. Effects of content and surface hydrophobic modification of BaTiO3 on the cooling properties of ASA (acrylonitrile-styrene-acrylate copolymer)10.1016/j.apsusc.2017.08.080 ↗
29. Effect of titanium dioxide (TiO2) with different crystal forms and surface modifications on cooling property and surface wettability of cool roofing materials10.1016/j.solmat.2017.07.017 ↗
30. Prediction of Soil TN and TC at a Farm-Scale Using VIS-NIR Spectroscopy
31. Methods of creating solar-reflective nonwhite surfaces and their application to residential roofing materials10.1016/j.solmat.2006.06.062 ↗
32. In situ synthesis of ternary BaTiO3/MWNT/PBO electromagnetic microwave absorption composites with excellent mechanical properties and thermostabilities10.1039/C5TA01410G ↗
33. Induced magnetism and magnetoelectric coupling in ferroelectric BaTiO3 by Cr-doping synthesized by a facile chemical route10.1039/c3ta11845b ↗
34. UV-irradiation-enhanced ferromagnetism in BaTiO310.1021/jz900131x ↗
35. Surface modification of cellulose nanofibers with alkenyl succinic anhydride for high-density polyethylene reinforcement10.1016/j.compositesa.2015.11.009 ↗
36. Efficient preparation of hybrid nanocomposite coatings based on poly(vinyl alcohol) and silane coupling agent modified TiO2 nanoparticles10.1016/j.porgcoat.2011.04.010 ↗
37. Solar radiation properties of common membrane roofs used in building structures10.1016/j.matdes.2016.05.068 ↗
38. Effect of butadiene/styrene ratio, block structure and carbon nanotube content on the mechanical and electrical properties of thermoplastic elastomers after UV ageing10.1016/j.polymertesting.2015.02.002 ↗
39. Solvothermal synthesis of Sb: SnO2 nanoparticles and IR shielding coating for smart window10.1016/j.matdes.2015.09.013 ↗
40. Development of paints with infrared radiation reflective properties10.1590/0104-1428.1869 ↗
41. Application of rutile and anatase onto cotton fabric and their effect on the NIR reflection/surface temperature of the fabric10.1016/j.solmat.2014.12.011 ↗
42. Parameterization of cloud droplet activation using a simplified treatment of the aerosol number size distribution10.1029/2007JD009485 ↗
43. Homocomposites of Polylactide (PLA) with induced interfacial stereocomplex crystallites10.1021/acssuschemeng.5b00498 ↗
44. Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region10.1002/pen.760110305 ↗
45. P. Törmälä, T. Välimaa, H. Niiranen, T. Pohjonen, P. Rokkanen, Bioactive, bioabsorbable surgical composite material. US6406498, 2002.
46. Toughening effects of titanium dioxide nanoparticles on TiO2/epoxy resin nanocomposites10.1002/pc.20911 ↗
47. Thermal and mechanical properties of single-walled carbon nanotubes–polypropylene composites prepared by melt processing10.1016/j.carbon.2005.01.031 ↗
48. Significant and concurrent enhancement of stiffness, strength, and toughness for paraffin wax through organoclay addition10.1002/adma.200502615 ↗