Analysing impact of oxygen and water exposure on roll-coated organic solar cell performance using impedance spectroscopy
Source abstract
Abstract
In this work we study the degradation of roll-coated flexible inverted organic solar cells in different atmospheres. We demonstrate that impedance spectroscopy is a powerful tool for elucidating degradation mechanisms; it is used here to distinguish the different degradation mechanisms due to water and oxygen. Identical cells were exposed to different accelerated degradation environments using water only, oxygen only, and both water and oxygen simultaneously, all of them enhanced with UV light. The photocurrent is dramatically reduced in the oxygen-degraded samples. Impedance measurements indicate that this phenomenon is attributed to defects introduced by absorption of oxygen, which results in an increase of the acceptor impurity (NA) at the cathode interface obtained from a Mott-Schottky analysis. Simultaneously, at the anode interface where PEDOT:PSS is not shielded by the substrate, the nature of degradation differs for the water and oxygen degraded samples. While oxygen + UV light decreases the conductivity of the PEDOT:PSS layer, water + UV light changes the PEDOT:PSS work function inducing a depletion region at the anode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Plastic solar cells
2. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
3. On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells10.1039/b823495g ↗
4. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
5. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. Hybrid graphene-metal oxide solution processed electron transport layers for large area high-performance organic photovoltaics10.1002/adma.201304780 ↗
7. Solar cell efficiency tables (version 49)10.1002/pip.2855 ↗
8. Stability of polymer solar cells10.1002/adma.201104187 ↗
9. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
10. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
11. Comparative indoor and outdoor stability measurements of polymer based solar cells10.1038/s41598-017-01505-w ↗
12. Photoanode/electrolyte interface stability in aqueous dye-sensitized solar cells10.1002/ente.201600285 ↗
13. Effects of electron trapping and protonation on the efficiency of water-splitting dye-sensitized solar cells10.1021/ja5040705 ↗
14. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
15. Advancements in the stability of perovskite solar cells: degradation mechanisms and improvement approaches10.1039/C5RA27424A ↗
16. Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers10.1126/science.aah4046 ↗
17. Luminescent downshifting by photo-induced sol-gel hybrid coatings: accessing multifunctionality on flexible organic photovoltaics via ambient temperature material processing
18. Self-healing polymer sealant for encapsulating flexible solar cells10.1016/j.solmat.2015.11.004 ↗
19. Light-induced degradation of the active layer of polymer based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
20. The mechanism of photo- and thermooxidation of poly(3- hexylthiophene) (p3ht) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
21. Oxygen doping of P3HT:PCBM blends: influence on trap states charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
22. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
23. The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells10.1063/1.2975185 ↗
24. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
25. Con- ductivity degradation study of PEDOT:PSS films under heat treatment in helium and atmospheric air10.4236/ojopm.2012.21002 ↗
26. Investigating electrodes degradation in organic photovoltaics through reverse engineering under accelerated humidity lifetime conditions10.1016/j.solmat.2014.07.051 ↗
27. Influence of water on the work function of conducting poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)10.1063/1.2435350 ↗
28. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques — the ISOS-3 inter- laboratory collaboration10.1039/c2ee03508a ↗
29. TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices – the ISOS-3 inter-laboratory collaboration10.1039/c2cp41787a ↗
30. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
31. On the stability of a variety of organic photovoltaic devices by IPCE and insitu IPCE analyses – the ISOS-inter-laboratory collaboration10.1039/c2cp40821j ↗
32. A comparative study of fluorine substituents for enhanced stability of flexible and ITO-free high-performance polymer solar cells10.1002/polb.23505 ↗
33. Oxygen doping-induced photo-generation loss in P3HT:PCBM solar cells10.1016/j.solmat.2012.01.012 ↗
34. Light-modulated TiOx interlayer dipole and contact activation in organic solar cells cathode10.1002/adfm.201401233 ↗
35. Impedance spectroscopy characterisation of highly efficient silicon solar cells under different light illumination intensities10.1039/b812468j ↗
36. Diffusion-recombination determines collected current and voltage in polymer:fullerene solar cells10.1021/jp305941f ↗
37. Slot-die-coated V2O5 as hole transport layer for flexible organic solar cells and optoelectronic devices10.1002/adem.201600119 ↗
38. G.F. Dibb, J.C. Blakesley, F.A. Castro, Environmental stability of organic semiconductors for use in optoelectronic devices (book chapter), in: Werasak Udomkichdecha, Anchalee Mononukul, Thomas Böllinghaus, Jürgen Lexow (eds.), Materials for Energy Infrastructure, Springer, Singapore, Ch. 8, pp. 73–81. ISBN: 978-981-287-724-6.10.1007/978-981-287-724-6_8 ↗
39. Origin of the S-shaped JV curve and the light-soaking issue in inverted organic solar cells10.1002/aenm.201502265 ↗
40. Understanding S-shaped current-voltage characteristics in organic solar cells containing a TiOx interlayer with impedance spectroscopy and equivalent circuit analysis10.1021/jp305206d ↗
41. Origin of the kink in current-density versus voltage curves and efficiency enhancement of polymer-C60 heterojunction solar cells10.1109/JSTQE.2010.2040807 ↗
42. Trap-assisted and Langevin-type recombination in organic light-emitting diodes10.1103/PhysRevB.83.165204 ↗
43. Recombination via tail states in polythiophene:fullerene solar cells10.1103/PhysRevB.83.115209 ↗
44. Relationship between energetic disorder and open-circuit voltage in bulk heterojunction organic solar cells10.1103/PhysRevB.84.075210 ↗
45. On the differences between dark and light ideality factor in polymer:fullerene solar cells10.1021/jz4012146 ↗
46. Sensitivity of the Mott–Schottky analysis in organic solar cells10.1021/jp300397f ↗
47. Rhoderick · 1988
48. Photoinduced oxygen release and persistent photoconductivity in ZnO nanowires10.1186/1556-276X-6-404 ↗
49. Solution-processed ultraviolet photodetectors based on colloidal ZnO nanoparticles10.1021/nl0803702 ↗
50. Influence of doping on charge carrier collection in normal and inverted geometry polymer:fullerene solar cells10.1038/srep03335 ↗
51. Modeling the influence of doping on the performance of bulk heterojunction organic solar cells: one-dimensional effective semiconductor versus two-dimensional donor/acceptor model10.1103/PhysRevB.86.075315 ↗
52. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
53. Analysis of the degradation mechanism of ITO-free organic solar cells under UV radiation10.1016/j.solmat.2013.10.021 ↗
54. Circuital model validation for S-shaped organic solar cells by means of impedance spectroscopy10.1109/JPHOTOV.2014.2362978 ↗
55. Evolution with annealing of solar cell parameters modeling the S-shape of the current–voltage characteristic10.1016/j.solmat.2012.04.048 ↗
56. An in-depth analysis of the modelling of organic solar cells using multiple-diode circuits10.1016/j.solener.2016.06.033 ↗
57. Charge transport in disordered organic photoconductors a Monte Carlo simulation study10.1002/pssb.2221750102 ↗
58. Simultaneous determination of carrier lifetime and electron density-of-states in P3HT:PCBM organic solar cells under illumination by impedance spectroscopy10.1016/j.solmat.2009.10.015 ↗
59. Wide energy-window view on the density of states and hole mobility in poly(p-phenylene vinylene)10.1103/PhysRevLett.93.166601 ↗
60. Band bending in conjugated polymer layers10.1103/PhysRevLett.106.216402 ↗
61. Low-density band-gap states in pentacene thin films probed with ultrahigh-sensitivity ultraviolet photoelectron spectroscopy10.1063/1.3258351 ↗