Studies of the optimization of recombination layers for inverted tandem polymer solar cells
Source abstract
Abstract
Abstract We report on an optimization study of recombination layers in inverted tandem bulk heterojunction polymeric solar cells. Modification of bilayers of MoO x /Ag with a polymeric surface modifier, polyethylenimine ethoxylated (PEIE), is found to significantly improve the performance of these recombination layers. The improvement is assigned to a significant reduction by 1.5 eV of the work function of the Ag with PEIE. An analysis of the electrical, optical, and surface properties of the recombination trilayer is presented. Inverted tandem polymer solar cells, fabricated with two identical active layers comprising a donor polymer poly(3-hexylthiophene) (P3HT), and a fullerene derivative acceptor, [6,6]-phenyl C 61 butyric acid methyl ester (PC 60 BM), provide a proof-of-principle demonstration of the effectiveness of the MoO x /Ag/PEIE trilayer as recombination layer. Such tandem cells yield an open-circuit voltage of 1042 mV and fill factors of 0.62, comparable to those of single cells (0.63) under simulated AM 1.5G, 100 mW/cm 2 illumination. Preliminary shelf lifetime studies suggest that these trilayer recombination layers show good air stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Organic photovoltaics10.1039/b812502n ↗
2. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
3. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
4. The critical role of processing and morphology in determining degradation rates in polymer solar cells10.1002/aenm.201000030 ↗
5. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
6. Electrical and optical properties of ZnO processed by atomic layer deposition in inverted polymer solar cells10.1021/jp106641j ↗
7. Inverted organic solar cells with ITO electrodes modified with an ultrathin Al2O3 buffer layer deposited by atomic layer deposition10.1039/c0jm00662a ↗
8. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
9. A metal-oxide interconnection layer for polymer tandem solar cells with an inverted architecture10.1002/adma.201001033 ↗
10. Optimization of inverted tandem organic solar cells10.1016/j.solmat.2010.11.023 ↗
11. MoO3 films spin-coated from a nanoparticle suspension for efficient hole-injection in organic electronics10.1002/adma.201003065 ↗
12. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
13. Calculation of various physics constants in heterogenous substances I: dielectricity constants and conductivity of mixed bodies from isotropic substances10.1002/andp.19354160705 ↗
14. P-type doping of organic wide band gap materials by transition metal oxides: a case-study on molybdenum trioxide10.1016/j.orgel.2009.05.007 ↗
15. Effect of contamination on the electronic structure and hole-injection properties of MoO3/organic semiconductor interfaces10.1063/1.3374333 ↗
16. Direct determination of the electronic structure of the poly(3-hexylthiophene):phenyl-6,6-C61 butyric acid methyl ester blend10.1016/j.orgel.2010.07.023 ↗
17. A solution process for inverted tandem solar cells10.1016/j.orgel.2010.11.017 ↗
18. Inverted tandem organic solar cells with a MoO3/Ag/Al/Ca intermediate layer10.1063/1.3469928 ↗