A photoelectrochromic device based on gel electrolyte with a fast switching rate
Source abstract
Abstract
Abstract A photoelectrochromic device (PECD), with no need for an external power source, is studied under open and short-circuit conditions with light illumination. In this report, the conductive polymer, poly(3,3-diethyl-3,4-dihydro-2H-thieno-[3,4-b][1,4]dioxepine) (PProDOT-Et2), plays two roles, namely, as the electrochromic thin layer for electrochrome and the counter electrode for dye-sensitized solar cell (DSSC). An organic photosensitive dye, FL dye1, is adsorbed on a TiO2 electrode for providing the photocurrent. The electrolyte containing LiClO4, Br−/Br3− redox couple, succinonitrile, and poly-(vinylidenefluoride-hexafluoropropylene) (PVDF-HFP) dissolved in propylene carbonate (PC) is proposed as the gel electrolyte for the PECD. When the volume ratio of PVDF-HFP to succinonitrile is 6:2, the DSSC part provides a photocurrent density of 0.164 mA cm−2, a photovoltage of 0.75 V, a fill factor of 0.48, with a solar-to-electric conversion efficiency of 0.059% to drive the electrochromic reaction. This solar-to-electric power is sufficient for observing the electrochromism of PProDOT-Et2, due to its high coloration efficiency. Moreover, when succinonitrile is added to the PVDF-HFP/PC electrolyte, the nucleus size of PVDF-HFP in the composite was reduced. This is because the effective space available for the primary nucleation in the composite was reduced, thus suppressing the crystallization and increasing the ionic conductivity and the diffusivity of the electrolyte. This results in a shorter bleaching time (20–35 s) of the PECD compared with the devices using succinonitrile (177 s) or PVDF-HFP (126 s) alone. In this case, the transmittance can be changed reversibly from 46% (bleached) to 15% (darkened) at 590 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Photoelectrochromic behavior of prussian blue-modified tio2 electrodes10.1149/1.2119674 ↗
2. Photoelectrochromic windows and displays10.1038/383608a0 ↗
3. Fast-switching photovoltachromic cells with tunable transmittance10.1021/nn900428s ↗
4. A polyaniline nanofibre electrode and its application in a self-powered photoelectrochromic cell10.1088/0957-4484/18/1/015201 ↗
5. A photoelectrochromic device using a PEDOT thin film
6. Poly(ProDOT-Et2): a high-contrast, high-coloration efficiency electrochromic polymer10.1002/1521-3927(20021001)23:15<885::AID-MARC885>3.0.CO;2-X ↗
7. A novel photoelectrochromic device with dual application based on poly(3,4-alkylenedioxythiophene) thin film and an organic dye10.1016/j.jpowsour.2008.09.031 ↗
8. Performance of a solid-state photoelectrochromic device10.1016/j.solmat.2004.01.043 ↗
9. Flexible solid-state photoelectrochromic windows10.1149/1.1392635 ↗
10. All-solid-state electrochromic device based on poly(butyl viologen), Prussian blue, and succinonitrile10.1016/j.solmat.2009.06.003 ↗
11. Ambient temperature plastic crystal electrolyte for efficient, all-solid-state dye-sensitized solar cell10.1021/ja045013h ↗
12. Investigation of Li salt doped succinonitrile as potential solid electrolytes for lithium batteries10.1016/j.jpowsour.2007.06.103 ↗
13. Suppression of crystallization in a plastic crystal electrolyte (SN/LiClO4) by a polymeric additive (polyethylene oxide) for battery applications10.1016/j.polymer.2009.01.022 ↗
14. Plastic-polymer composite electrolytes: novel soft matter electrolytes for rechargeable lithium batteries10.1016/j.elecom.2008.10.009 ↗
15. Increasing ionic conductivity and mechanical strength of a plastic electrolyte by inclusion of a polymer10.1016/j.electacta.2008.08.010 ↗
16. High efficiency quasi-solid-state dye-sensitized solar cell based on polyvinyidene fluoride-co-hexafluoro propylene containing propylene carbonateand acetonitrile as plasticizers10.1016/j.jphotochem.2009.07.014 ↗
17. Organic dyes containing thienylfluorene conjugation for solar cells10.1039/b506732d ↗
18. Sol–gel processed TiO2 films for photovoltaic applications10.1023/A:1011273700573 ↗
19. Bard · 2001
20. The plastic-crystalline phase of succinonitrile as a universal matrix for solid-state ionic conductors10.1038/nmat1158 ↗
21. Preparation and characterisation of nano-structured WO3–TiO2 layers for photoelectrochromic devices10.1007/s10971-005-4794-3 ↗