journal article·2014-01

Hierarchical porous titania/carbon nanotube nanocomposite photoanode synthesized by controlled phase separation for dye sensitized solar cell

Mohammad Reza Golobostanfard, Hossein Abdizadeh

Publisher page

Abstract

Abstract Incorporation of carbon nanotubes (CNT) in titania photoanode of dye sensitized solar cell (DSC) with hierarchical porous structure synthesized by controlled phase separation was studied. The hierarchical porous composite photoanode contained mesopores of 15 nm and macropores of 280 nm with surface roughness of about 15.4 nm. The Raman spectroscopy confirmed the presence of CNTs beside titania anatase phase. Also, the transmission electron microscopy revealed that a very thin titania layer was formed on CNTs after impregnation with titania sol. The I – V characteristics of the DSCs with and without CNTs showed that incorporation of CNTs in photoanode led to an increase in current density and efficiency, which was due to the increase in surface area and hence dye adsorption, increase in density of states in titania and charge injection, and increase in charge collection and electron lifetime. The electrochemical impedance spectroscopy exhibited lower series resistance, lower charge injection resistance, and higher electron lifetime in DSCs containing CNTs. Addition of CNTs in photoanode also affected the critical thickness of porous layer with which the maximum efficiency could be obtained. Furthermore, the open circuit voltage and fill factor of the DSCs was independent of thickness when TiO 2 /CNT composite was used. The optimum amount of CNTs was found to be 0.32 wt%, which led to the short circuit current density of 10.12 mA/cm 2 , open circuit voltage of 680 mV, fill factor of 56%, and efficiency of 3.85%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Dye-sensitized solar cells10.1021/cr900356p ↗
3. Dye-sensitized solar cells10.1016/S1389-5567(03)00026-1 ↗
4. Electron transfer dynamics in dye-sensitized solar cells10.1021/cm200651e ↗
5. Kinetic and energetic paradigms for dye-sensitized solar cells: moving from the ideal to the real10.1021/ar900145z ↗
6. Highly efficient dye-sensitized solar cells: progress and future challenges10.1039/c3ee24453a ↗
7. Nanostructured photoelectrodes for dye-sensitized solar cells10.1016/j.nantod.2010.12.007 ↗
8. Porphyrin-sensitized solar cells with cobalt (ii/iii)-based redox electrolyte exceed 12 percent efficiency10.1126/science.1209688 ↗
9. All-solid-state dye-sensitized solar cells with high efficiency10.1038/nature11067 ↗
10. Molecular engineering of organic sensitizers for solar cell applications10.1021/ja066376f ↗
11. Controlled electron injection and transport at materials interfaces in dye sensitized solar cells10.1016/j.mser.2008.09.001 ↗
12. Single walled carbon nanotube network electrodes for dye solar cells10.1016/j.solmat.2010.05.026 ↗
13. Transferred vertically aligned N-doped carbon nanotube arrays: use in dye-sensitized solar cells as counter electrodes10.1039/c1cc10471c ↗
14. Improved efficiency of dye-sensitized solar cells using a vertically aligned carbon nanotube counter electrode10.1115/1.4001148 ↗
15. Vertically-aligned carbon nanotube counter electrodes for dye-sensitized solar cells10.1016/j.solener.2012.11.013 ↗
16. Improved dye-sensitized solar cells using ionic nanocomposite gel electrolytes10.1016/j.jphotochem.2003.12.020 ↗
17. Single-walled carbon nanotube scaffolds for dye-sensitized solar cells10.1021/jp7107472 ↗
18. Two-dimensional graphene bridges enhanced photoinduced charge transport in dye-sensitized solar cells10.1021/nn901660v ↗
19. Dye-sensitized solar cells based on multiwalled carbon nanotube–titania/titania bilayer structure photoelectrode10.1016/j.jcis.2011.03.031 ↗
20. Dye-sensitized solar cells based on TiO2–MWCNTs composite electrodes: performance improvement and their mechanisms10.1016/j.diamond.2008.10.052 ↗
21. Effect of multi-walled carbon nanotubes on the stability of dye sensitized solar cells10.1016/j.jpowsour.2013.01.075 ↗
22. Incorporating carbon nanotube in a low-temperature fabrication process for dye-sensitized TiO2 solar cells10.1016/j.solmat.2008.07.012 ↗
23. Enhanced conversion efficiency in dye-sensitized solar cells with nanocomposite photoanodes10.1088/0022-3727/44/25/255103 ↗
24. Optimization of the cutting process of multi-wall carbon nanotubes for enhanced dye-sensitized solar cells10.1016/j.tsf.2010.11.008 ↗
25. Virus-templated self-assembled single-walled carbon nanotubes for highly efficient electron collection in photovoltaic devices10.1038/nnano.2011.50 ↗
26. Hierarchically structured photoelectrodes for dye-sensitized solar cells10.1039/c0jm04345a ↗
27. Recent progress in dye-sensitized solar cells using nanocrystallite aggregates10.1002/aenm.201100352 ↗
28. Dye-sensitized solar cells employing a single film of mesoporous TiO2 beads achieve power conversion efficiencies over 10%10.1021/nn1010396 ↗
29. Nanoforest of hydrothermally grown hierarchical ZnO nanowires for a high efficiency dye-sensitized solar cell10.1021/nl1037962 ↗
30. High-efficiency dye-sensitized solar cell with three-dimensional photoanode10.1021/nl201792r ↗
31. Hierarchical TiO2 photoanode for dye-sensitized solar cells10.1021/nl101198b ↗
32. Hierarchical mesoporous films: from self-assembly to porosity with different length scales10.1021/cm200050r ↗
33. Effect of mixed solvent on structural, morphological, and optoelectrical properties of spin-coated TiO2 thin films10.1016/j.ceramint.2012.04.034 ↗
34. Hierarchical sol–gel derived porous titania/carbon nanotube films prepared by controlled phase separation10.1016/j.micromeso.2013.09.011 ↗
35. Effects of acid catalyst type on structural, morphological, and optoelectrical properties of spin-coated TiO2 thin film10.1016/j.physb.2012.12.040 ↗
36. Raman spectroscopy of carbon nanotubes10.1016/j.physrep.2004.10.006 ↗
37. Spectral characteristics of light harvesting, electron injection, and steady-state charge collection in pressed TiO2 dye solar cells10.1021/jp711245f ↗
38. Anisotropic TiO2 nanomaterials in dye-sensitized solar cells10.1039/c1cp23085a ↗
39. Electrospun TiO2 nanorods with carbon nanotubes for efficient electron collection in dye-sensitized solar cells10.1002/adma.201204256 ↗
40. Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells10.1021/jp052768h ↗
41. Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy10.1039/c0cp02249g ↗