journal article·2022-03

Design and preparation of salt hydrate/ graphene oxide@SiO2/ SiC composites for efficient solar thermal utilization

Hongzhi Cui, Pizhuang Wang, Haibin Yang, Tao Xu

Publisher page

Abstract

Efficient solar thermal utilization has attracted extensive attention because it effectively alleviates carbon dioxide emissions and environmental pollution. Phase-change material (PCM) energy storage technology has been regarded as the most promising in improving its efficiency. Toward higher energy utilization efficiency, how to realize conversion and storage of solar energy into PCM is becoming progressively important. Herein, we developed low-cost and stable sodium acetate trihydrate (SAT, salt hydrate PCM) with ultra-fast solar energy charging efficiency by integrating photothermal and thermal conductivity materials. Specifically, a graphene oxide@SiO 2 (GS) nanocomposite fabricated by a novel modified Stober method was employed as the nucleating agent and photothermal conversion enhancers for SAT. The supercooling degree of SAT can be reduced to 0.5 °C from 32.0 °C with the addition of 1.0 wt% GS, while the solar energy charging efficiency of SAT was increased by 92.5% when it is synergistically augmented by integrating GS and silicon carbide (SiC) foam. This study results indicate that the prepared SAT-GS-SiC composite with an enthalpy of 193.2 J/g can be potentially used to efficiently utilize solar energy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Andre · 2020
2. Potassium-ion batteries: outlook on present and future technologies10.1039/D0EE02917C ↗
3. A review of mechanical energy storage systems combined with wind and solar applications10.1016/j.enconman.2020.112670 ↗
4. A textile-based SnO2 ultra-flexible electrode for lithium-ion batteries
5. Development of an extremely concentrated solar energy delivery system using silica optical fiber bundle for deployment of solar energy: daylighting to photocatalytic wastewater treatment10.1016/j.solener.2020.11.061 ↗
6. Solar photovoltaic and thermal technology and applications in China10.1016/j.rser.2013.03.010 ↗
7. Phase change materials integrated into building walls: an updated review10.1016/j.rser.2021.110751 ↗
8. Preparation and characterizations of a novel temperature-tuned phase change material based on sodium acetate trihydrate for improved performance of heat pump systems10.1016/j.renene.2020.05.061 ↗
9. Hybrid thermal energy storage with phase change materials for solar domestic hot water applications: direct versus indirect heat exchange systems10.1016/j.renene.2019.08.121 ↗
10. Experimental investigations on heat content of supercooled sodium acetate trihydrate by a simple heat loss method10.1016/j.solener.2016.09.045 ↗
11. Porosity and density measurements of sodium acetate trihydrate for thermal energy storage10.1016/j.applthermaleng.2017.12.052 ↗
12. The shape-stabilized light-to-thermal conversion phase change material based on CH3COONa·3H2O as thermal energy storage media10.1016/j.applthermaleng.2018.03.053 ↗
13. Polyurethane macro-encapsulation for CH3COONa·3H2O-Na2S2O3·5H2O/Melamine sponge to fabricate form-stable composite phase change material10.1016/j.cej.2020.128308 ↗
14. Thermal property and latent heat energy storage behavior of sodium acetate trihydrate composites containing expanded graphite and carboxymethyl cellulose for phase change materials10.1016/j.applthermaleng.2014.10.035 ↗
15. Phase change performance of sodium acetate trihydrate with AlN nanoparticles and CMC10.1016/j.solmat.2011.05.025 ↗
16. Preparation research of novel composite phase change materials based on sodium acetate trihydrate10.1016/j.applthermaleng.2017.02.102 ↗
17. Storing solar energy in sodium acetate-based hand warmers using light-absorbing particles10.1021/acsaem.0c01933 ↗
18. Thermal performance of sodium acetate trihydrate based composite phase change material for thermal energy storage10.1016/j.applthermaleng.2018.07.094 ↗
19. Thermal conductivity enhancement of hydrated salt phase change materials employing copper foam as the supporting material10.1016/j.solmat.2019.04.020 ↗
20. Preparation of modified sodium acetate trihydrate and the thermodynamic analysis10.1007/s10973-018-7745-2 ↗
21. Preparation and performance analysis of modified sodium acetate trihydrate10.3390/ma11061016 ↗
22. Preparation and thermal properties of sodium acetate trihydrate as a novel phase change material for energy storage10.1016/j.energy.2018.10.164 ↗
23. Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material10.1016/S1359-4311(03)00107-8 ↗
24. Experimental studies on the supercooling and melting/freezing characteristics of nano-copper/sodium acetate trihydrate composite phase change materials10.1016/j.renene.2016.08.001 ↗
25. Supercooling of phase-change materials and the techniques used to mitigate the phenomenon10.1016/j.apenergy.2019.02.045 ↗
26. Progress on use of nanoparticles in salt hydrates as phase change materials10.1016/j.rser.2020.109727 ↗
27. Development of novel composite PCM for thermal energy storage using CaCl2·6H2O with graphene oxide and SrCl2·6H2O10.1016/j.enbuild.2017.09.081 ↗
28. Removal and reutilization of metal ions on ZIF-67/GO membrane via synergistic photocatalytic-photothermal route
29. Fabrication of GO/NH4NO3 composite films by vacuum filtration as laser converter for enhanced photothermal performance
30. Graphene nanosheets synthesis via chemical reduction of graphene oxide using sodium acetate trihydrate solution10.1016/j.synthmet.2014.04.007 ↗
31. Sodium acetate trihydrate-based composite phase change material with enhanced thermal performance for energy storage
32. Middle term immersion corrosion tests on metal-salt hydrate pairs used for latent heat storage in the 32 to 36°C temperature range10.1002/1521-4176(200110)52:10<748::AID-MACO748>3.0.CO;2-S ↗
33. Immersion corrosion tests on metal-salt hydrate pairs used for latent heat storage in the 32 to 36°C temperature range10.1002/1521-4176(200102)52:2<140::AID-MACO140>3.0.CO;2-R ↗
34. SiO2/SiC supports with tailored thermal conductivity to reveal the effect of surface temperature on Ru-catalyzed CO2 methanation
35. Theoretical modelling for interface design and thermal conductivity prediction in diamond/Cu composites10.1016/j.diamond.2017.11.010 ↗
36. Preparation of modified sodium acetate trihydrate and the thermodynamic analysis10.1007/s10973-018-7745-2 ↗
37. Xanthan gum production under several operational conditions: molecular structure and rheological properties10.1016/S0141-0229(99)00160-X ↗
38. Experimental investigation on micro-scale phase change material based on sodium acetate trihydrate for thermal storage10.1016/j.solener.2019.09.050 ↗
39. Ag-graphene/PEG composite phase change materials for enhancing solar-thermal energy conversion and storage capacity10.1016/j.apenergy.2018.12.075 ↗
40. Development of graphitic domains in carbon foams for high efficient electro/photo-to-thermal energy conversion phase change composites10.1016/j.cej.2019.01.032 ↗
41. Novel photodriven composite phase change materials with bioinspired modification of BN for solar-thermal energy conversion and storage10.1039/C6TA03733J ↗
42. An ice-templated assembly strategy to construct graphene oxide/boron nitride hybrid porous scaffolds in phase change materials with enhanced thermal conductivity and shape stability for light–thermal–electric energy conversion10.1039/C6TA08454K ↗
43. A facile route of making silica nanoparticles-covered graphene oxide nanohybrids (SiO2-GO); fabrication of SiO2-GO/epoxy composite coating with superior barrier and corrosion protection performance10.1016/j.cej.2016.06.028 ↗
44. Silica-graphene oxide nanohybrids as reinforcing filler for natural rubber10.1007/s10965-020-02209-y ↗
45. Fabrication and characterization of CaCl2·6H2O composite phase change material in the presence of CsxWO3 nanoparticles
46. Preparation, characterization, and modification of sodium acetate trihydrate-urea binary eutectic mixtures as phase change material10.1021/acs.energyfuels.0c00382 ↗
47. Thermal properties and thermal conductivity enhancement of composite phase change material using sodium acetate trihydrate–urea/expanded graphite for radiant floor heating system10.1016/j.applthermaleng.2018.04.102 ↗
48. Granular phase changing composites for thermal energy storage10.1016/j.solener.2004.04.022 ↗
49. Development of poly (vinyl alcohol)(PVA)-based sodium ion conductors for electric double-layer capacitors application10.1016/j.mseb.2020.114804 ↗
50. In-situ synthesis of FexSiy phases and their effects on the properties of SiC porous ceramics10.1016/j.jallcom.2019.01.031 ↗
51. Honeycomb-like structured biological porous carbon encapsulating PEG: a shape-stable phase change material with enhanced thermal conductivity for thermal energy storage10.1016/j.enbuild.2017.10.078 ↗
52. Improvement of supercooling and thermal conductivity of the sodium acetate trihydrate for thermal energy storage with α-Fe2O3 as addictive10.1007/s10973-018-7166-2 ↗
53. Preparation and thermal properties of SAT-CMC-DSP/EG composite as phase change material10.1016/j.applthermaleng.2017.03.097 ↗
54. A promising form-stable phase change material composed of C/SiO2 aerogel and palmitic acid with large latent heat as short-term thermal insulation
55. Boron nitride microsheets bridged with reduced graphene oxide as scaffolds for multifunctional shape stabilized phase change materials
56. Comparative study of carbon nanoparticles and single-walled carbon nanotube for light-heat conversion and thermal conductivity enhancement of the multifunctional PEG/diatomite composite phase change material10.1021/acsami.9b04349 ↗
57. Novel light–driven CF/PEG/SiO2 composite phase change materials with high thermal conductivity10.1016/j.solmat.2017.09.045 ↗
58. Synthesis and light-heat conversion performance of hybrid particles decorated MWCNTs/paraffin phase change materials10.1016/j.tca.2017.03.003 ↗
59. Preparation and characterization of GO/PEG photo-thermal conversion form-stable composite phase change materials10.1016/j.renene.2019.03.141 ↗
60. Developing a heat-insulating composite phase change material with light-to-thermal conversion performance from graphene oxide/silica hybrid aerogel10.1016/j.applthermaleng.2020.115303 ↗
61. Boron nitride microsheets bridged with reduced graphene oxide as scaffolds for multifunctional shape stabilized phase change materials10.1016/j.solmat.2020.110441 ↗
62. 3D reduced graphene oxide aerogel supported TiO2-x for shape-stable phase change composites with high photothermal efficiency and thermal conductivity10.1016/j.solmat.2021.111068 ↗