journal article·2020-08

A laser texturing study on multi-crystalline silicon solar cells

Jianming Ding, Shuai Zou, Jonghyung Choi, Junhu Cui, Dichun Yuan, Hua Sun, Chengkun Wu, Jingyan Zhu, Xiaoya Ye, Xiaodong Su

Publisher page

Abstract

Abstract A laser texturing process including laser ablation and post-etching has been developed to form a unique microstructure of pits in craters (PIC) on the front surface of the diamond wire sawn multi-crystalline silicon (DWS mc-Si) wafer. A laser ablation is applied to produce craters with size of tens of microns distributed at the front surface of the wafer, followed by a post-etching process to remove silicon slags produced in the laser process and to form the pits of size in few microns embedded in each crater. The structural, optical and electrical characteristics of the PIC structure are investigated and optimized to achieve a good trade-off between light trapping and recombination. Finally, an applicative laser texturing process is demonstrated for the industrial-grade DWS mc-Si solar cells with an increased efficiency of 19.26% compared with the standard acid textured ones (19.10%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Laser Material Processing Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 18.88%-efficient multi-crystalline silicon solar cells by combining Cu-catalyzed chemical etching and post-treatment process10.1016/j.solener.2018.04.049 ↗
2. Broadband spectral response of diamond wire sawn mc-Si solar cell with omnidirectional performance and improved appearance10.1016/j.solmat.2017.12.039 ↗
3. 18.45%-efficient multi-crystalline silicon solar cells with novel nanoscale pseudo-pyramid texture10.1002/adfm.201401589 ↗
4. Rating and sorting of mc-Si as-cut wafers in solar cell production using PL imaging10.1016/j.solmat.2012.05.027 ↗
5. Large-area multicrystalline silicon solar cell fabrication using reactive ion etching (RIE)10.1016/j.solmat.2010.03.029 ↗
6. Black nonreflecting silicon surfaces for solar cells10.1063/1.2204573 ↗
7. Texturing of polycrystalline silicon10.1016/0927-0248(95)00077-1 ↗
8. Mechanically V-textured low cost muticrystalline silicon solar cells with a novel printing metallization
9. Epitaxially grown emitters for thinfilm silicon solar cells result in 16% efficiency10.1016/j.tsf.2009.10.061 ↗
10. MACE nano-texture process applicable for both single and multi-crystalline diamond-wire sawn Si solar cells10.1016/j.solmat.2018.10.015 ↗
11. Post-texturing multi-crystalline silicon wafer via a two-step alkali etching method to achieve efficient nanostructured solar cells10.1016/j.solmat.2016.08.032 ↗
12. Complementary etching behavior of alkali, metal-catalyzed chemical, and post-etching of multicrystalline silicon wafers10.1002/pip.3125 ↗
13. 16.7% efficient laser textured, buried contact polycrystalline silicon solar cell10.1063/1.102019 ↗
14. Direct laser texturing for high-efficiency silicon solar cells10.1109/JPHOTOV.2012.2228302 ↗
15. Microstructuring of silicon with femtosecond laser pulses10.1063/1.122241 ↗
16. Femtosecond laser-induced formation of spikes on silicon10.1007/s003390051052 ↗
17. Near-unity below-band-gap absorption by microstructured silicon10.1063/1.1358846 ↗
18. Comparison of structure and properties of femtosecond and nanosecond laser-structured silicon10.1063/1.1667004 ↗
19. Modeling laser-induced periodic surface structures: finite-difference time-domain feedback simulations10.1063/1.4867759 ↗
20. Optical and electrical properties of laser texturing for high-efficiency solar cells10.1002/pip.667 ↗
21. Surface texturing of multicrystalline silicon solar cells
22. Effects of different laser modified surface morphologies and post-texturing cleanings on c-Si solar cell performance10.1016/j.renene.2019.08.031 ↗
23. Influencing factors on the formation of the low minority carrier lifetime zone at the bottom of seed-assisted cast ingots10.1016/j.jcrysgro.2014.05.015 ↗
24. About the origin of low wafer performance and crystal defect generation on seed-cast growth of industrial mono-like silicon ingots10.1002/pip.2344 ↗
25. Distribution and propagation of dislocation defects in quasi-single crystalline silicon ingots cast by the directional solidification method10.1016/j.solmat.2014.08.022 ↗
26. HF/HNO3 etching of the saw damage10.1016/j.egypro.2013.07.271 ↗
27. Formation of porous silicon by metal particle enhanced chemical etching in HF solution and its application for efficient solar cells, Electrochem
28. Direct laser texturing for high efficiency silicon solar cells10.1109/JPHOTOV.2012.2228302 ↗
29. Dark I–V–T measurements and characteristics of (n)a-Si/(p)c-Si hetero junction solar cells10.1016/S0927-0248(00)00385-8 ↗
30. An18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
31. Texturization of multicrystalline silicon by wet chemical etching for silicon solar cells10.1007/s10853-005-0583-1 ↗
32. OPAL 2: rapid optical simulation of silicon solar cells