journal article·2019-09

Nickel doped cobaltite spinel as a solar selective absorber coating for efficient photothermal conversion with a low thermal radiative loss at high operating temperatures

S.R. Atchuta, S. Sakthivel, Harish C. Barshilia

Publisher page

Abstract

Abstract Concentrated Solar Thermal (CST) system efficiency depends mainly on the operating temperature. One of the key components in the CST system is the receiver tube to attain higher temperatures, where the challenge remains on developing a solar absorber coating with high photothermal conversion and thermal stability at high temperatures. Nickel doped cobaltite (NixCo3-xO4; 0 ≤ x ≥ 1) thin film has been developed with spinel oxide phase on top of stainless steel substrates using a simple wet-chemical dip coating method as a base absorber layer (absorptance, α = 0.92; emittance, e = 0.14). On top of the base absorber layer, coating integrated with silica (SiO2) as an optical enhancement layer (OPEL) has been deposited to make the coating more selective (α = 0.94 and e = 0.13). A thorough investigation has been done to characterize the samples through UV–Vis–NIR spectrophotometer, Fourier transform infra-red spectroscopy, X-ray diffraction, transmission electron microscopy and thermogravimetric analyzer for the optical and physiochemical properties. Besides, the optimized spinel coating exhibits a low radiative loss with a minimum thermal emissivity of 0.07 at 100 °C and 0.18 at 500 °C, which indicates that the nickel cobaltite spinels are a very good candidate for high temperature solar selective applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Role of renewable energy sources in environmental protection: a review10.1016/j.rser.2010.11.037 ↗
2. A review on solar energy use in industries10.1016/j.rser.2010.12.018 ↗
3. Proposal and evaluation of subordinate standard solar irradiance spectra for applications in solar energy systems10.1016/j.solener.2018.03.043 ↗
4. Overview of solar technologies for electricity, heating and cooling production10.1016/j.rser.2018.03.112 ↗
5. Concentrated solar power in India : current status , challenges and future outlook10.18520/cs/v115/i2/222-227 ↗
6. A review on the development of photovoltaic/concentrated solar power (PV-CSP) hybrid systems10.1016/j.solmat.2016.12.004 ↗
7. 2018
8. CSP electricity cost evolution and grid parities based on the IEA roadmaps10.1016/j.enpol.2011.10.032 ↗
9. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
10. Advances in solar thermal electricity technology10.1016/S0038-092X(03)00102-6 ↗
11. A high-performance spectrally-selective solar absorber based on a yttria-stabilized zirconia cermet with high-temperature stability10.1039/C5EE02066B ↗
12. Spectrally selective coatings for energy efficiency and solar applications10.1088/0031-8949/32/4/026 ↗
13. Review Materials for photothermal solar energy conversion10.1007/BF00700767 ↗
14. High temperature performance of high-efficiency, multi-layer solar selective coatings for tower applications10.1016/j.egypro.2015.03.046 ↗
15. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power10.1016/j.nanoen.2014.06.016 ↗
16. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
17. Spectrally selective surfaces by chemical vapor deposition10.1016/0165-1633(85)90027-9 ↗
18. Properties of spray-deposited cobalt oxide selective coatings on aluminium and galvanised iron substrates10.1016/0306-2619(82)90055-1 ↗
19. Black cobalt selective coatings by spray pyrolysis for photothermal conversion of solar energy10.1016/0038-092X(82)90220-1 ↗
20. A highly thermally stable Mn-Cu-Fe composite oxide based solar selective absorber layer with low thermal loss at high temperature10.1016/j.jallcom.2015.05.038 ↗
21. Black oxide nanoparticles as durable solar absorbing material for high-temperature concentrating solar power system10.1016/j.solmat.2014.12.004 ↗
22. Sol – gel derived CuCoMnO x spinel coatings for solar absorbers : structural and optical properties10.1016/S0927-0248(01)00024-1 ↗
23. Zirconia nanoparticles embedded spinel selective absorber coating for high performance in open atmospheric condition10.1016/j.solmat.2017.09.032 ↗
24. Transition metal based CuxNiyCoz-x-yO4spinel composite solar selective absorber coatings for concentrated solar thermal applications10.1016/j.solmat.2018.09.033 ↗
25. Spectrally selective solar absorber stable up to 900 °C for 120 h under ambient conditions10.1016/j.solener.2018.09.009 ↗
26. Transition metal (Fe, Co, Ni, and Mn) oxides for oxygen reduction and evolution bifunctional catalysts in alkaline media10.1016/j.nantod.2016.09.001 ↗
27. Transition metal-metal oxide hybrids as versatile materials for hydrogen storage10.1016/j.cjph.2018.09.011 ↗
28. Anomalous magnetic properties of mechanically milled cobalt oxide nanoparticles10.1166/jnn.2005.187 ↗
29. Synthesis and optical properties of two cobalt oxides (CoO and Co3O4) nanofibers produced by electrospinning process10.1021/jp8027353 ↗
30. Effect of the partial replacement of Ni or Co by Cu on the electrocatalytic activity of the NiCo2O4spinel oxide10.1016/S0022-0728(99)00018-2 ↗
31. Catalytic decomposition of N2O over MxCo1-xCo2O4 (M = Ni, Mg) spinel oxides10.1016/S0926-3373(03)00174-7 ↗
32. Excellent catalytic performance of ZnxCo1-xCo2O4 spinel catalysts for the decomposition of nitrous oxide10.1016/S1566-7367(03)00131-6 ↗
33. Thermal evolution of cobalt hydroxides: a comparative study of their various structural phases10.1039/a804767g ↗
34. Effects of antireflection layers on the optical and thermal stability properties of a spectrally selective CrAlN-CrAlON based tandem absorber10.1016/j.solmat.2015.02.010 ↗
35. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
36. Characterization of thin CuCo2O4 films prepared by chemical spray pyrolysis. Study of their electrochemical stability by ex situ spectroscopic analysis10.1016/S0022-0728(96)05072-3 ↗
37. Ivanova · 2017 · vol. 58 · 793
38. nickel-cobalt oxide spinels prepared by thermal decomposition of Nickel(II)-Cobalt(II) hydroxide nitrates10.1016/0168-7336(86)80024-9 ↗
39. Vibrational spectroscopic study of the site occupancy distribution of cations in nickel cobalt oxides10.1063/1.1699505 ↗
40. Characterization of bulk and surface composition of CoxNi1-xOy mixed oxides for electrocatalysis10.1021/la9609128 ↗
41. Preparation of high-dispersity MCo204 (M = Mg, Ni, Zn) spinels by thermal dissociation of coprecipitated oxalates10.1016/0025-5408(89)90005-6 ↗
42. The effect of firing temperature, preparation technique and composition on the electrical properties of the nickel cobalt oxide series NixCo1-xOy10.1023/B:JMSC.0000007751.14703.4b ↗
43. Mesoporous NiCo2O4 spinel: influence of calcination temperature over phase purity and thermal stability10.1021/cg900648q ↗