journal article·2019-01

Studies on latent heat energy storage (LHES) materials for solar desalination application-focus on material properties, prioritization, selection and future research potential

D. Dsilva Winfred Rufuss, V. Rajkumar, L. Suganthi, S. Iniyan

Publisher page

Abstract

Abstract In recent years latent heat energy storage (LHES) has received a worldwide focus in the area of solar still applications. Among various techniques available to improve the productivity of solar stills, heat storage is one of the proverbial areas in the present scenario. LHES surpasses sensible heat energy storage (SHES) in solar still applications owing to its properties like latent heat, thermal conductivity, etc. Focus has to be given in the selection of suitable LHES material since its properties are very significant during the performance and operation of solar stills. Though previous reviews on LHES in solar stills focus only on the productivity enhancement, this paper presents an up to date comprehensive review exclusively about LHES in solar stills focusing on its productivity, properties of LHES materials and the mechanisms behind the variation in properties of LHES materials. Further, in addition to this, a detailed analysis is also presented in this paper by employing analytical hierarchy process (AHP) which enable the researchers to prioritize the properties during the selection of LHES in solar still applications. Besides AHP analysis, we also evaluate the relative efficiency of the available LHES materials for solar still application by data envelopment analysis (DEA) to find the frontier LHES materials thereby suggesting the methods to augment the properties of the frontier material (identified through DEA analysis). Thus, this paper may be a reference guide in the near future for the academicians, researchers to get an overview about the various LHES materials used in solar stills and significance of their properties for improving the yield in solar still applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Phase Change Materials Research · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Low mass fraction impregnation with graphene oxide (GO) enhances thermo-physical properties of paraffin for heat storage applications10.1016/j.tca.2017.07.005 ↗
2. Solar stills: a comprehensive review of designs, performance and material advances10.1016/j.rser.2016.05.068 ↗
3. Desalination of underground brackish waters using an electrodialysis system powered directly by photovoltaic energy10.1016/j.solmat.2008.07.020 ↗
4. Selection of materials for high temperature latent heat energy storage10.1016/j.solmat.2012.07.020 ↗
5. Factors influencing the productivity of a multiple-effect diffusion-type solar still coupled with a flat plate reflector10.1016/j.desal.2005.07.005 ↗
6. Solar stills: a review of the latest developments in numerical simulations10.1016/j.solener.2016.03.005 ↗
7. Advanced designs of solar desalination systems: a review10.1016/j.rser.2015.04.161 ↗
8. Techno-economic analysis of solar stills using integrated fuzzy analytical hierarchy process and data envelopment analysis10.1016/j.solener.2017.11.050 ↗
9. Solar distillation with single basin solar still using sensible heat storage materials10.1016/j.desal.2017.01.030 ↗
10. An experimental study on single basin double slope simulation solar still with thin layer of water in the basin10.1016/j.desal.2007.01.063 ↗
11. Performance enhancement of a single basin single slope solar still using agitation effect and external condenser10.1016/j.desal.2016.09.006 ↗
12. Performance of single-slope single-basin solar still with sensible heat storage materials10.1080/19443994.2012.664714 ↗
13. Combined effect of heat storage, reflective material, and additional heat source on the productivity of a solar still—techno-economic approach
14. Sustainable fresh water and power production by integrating PV panel in inclined solar still10.1016/j.jclepro.2017.11.140 ↗
15. A review on solar water distillation using sensible and latent heat10.1016/j.proeps.2015.06.072 ↗
16. Nanoparticles enhanced phase change material (NPCM) as heat storage in solar still application for productivity enhancement10.1016/j.egypro.2017.11.009 ↗
17. Solar still with latent heat energy storage: a review10.1016/j.ifset.2017.01.004 ↗
18. Effects of nanoparticle-enhanced phase change material (NPCM) on solar still productivity10.1016/j.jclepro.2018.04.201 ↗
19. Productivity enhancement of solar still by using porous absorber with bubble-wrap insulation10.1016/j.jclepro.2018.05.199 ↗
20. A review of the applications of nanofluids in solar energy10.1016/j.ijheatmasstransfer.2012.10.037 ↗
21. Performance study of solar stills with various absorbing materials and a sensible heat storage medium10.2298/TSCI16S4947P ↗
22. Enhanced heat and mass transfer in solar stills using nanofluids: a review10.1016/j.solener.2018.06.020 ↗
23. A review on solar water distillation using sensible and latent heat10.1016/j.proeps.2015.06.072 ↗
24. Integrated PV/T solar still – a mini-review
25. Fuzzy model reference learning control of multi-stage flash desalination plants10.1016/S0011-9164(98)00192-1 ↗
26. Novel metal coated nanoencapsulated phase change materials with high thermal conductivity for thermal energy storage10.1016/j.solmat.2017.12.006 ↗
27. Solar desalination using solar still enhanced by external solar collector and PCM10.1016/j.applthermaleng.2017.09.073 ↗
28. Comparative study on the solar still performance utilizing different PCM10.1016/j.desal.2018.01.016 ↗
29. Non-conventional solar stills. Part 1. Non-conventional solar stills with charcoal particles as absorber medium10.1016/S0011-9164(02)01093-7 ↗
30. non-conventional solar stills. Part 2. non-conventional solar stills with energy storage element10.1016/S0011-9164(02)01095-0 ↗
31. Transient performance of a stepped solar still withbuilt-in latent heat thermal energy storage10.1016/j.desa1.2003.12.010 ↗
32. Experimental and theoretical study of a single-basin solar sill in Jordan10.1016/j.icheatmasstransfer.2004.06.006 ↗
33. Thermal performance of a single basin solar still with PCM as a storage medium10.1016/j.apenergy.2008.10.014 ↗
34. Experimental investigation of a weir-type cascade solar still with built-in latent heat thermal energy storage system10.1016/j.desal.2010.03.033 ↗
35. Concentrated parabolic solar distiller integrated with latent heat storage material and mini solar pond
36. WateR Distillation Using Solar Energy System With Lauric Acid As Storage Medium10.5923/j.ijee.20110101.01 ↗
37. Desalination of the brackish water using a passive solar still with a heat energy storage system10.1016/j.desal.2013.05.017 ↗
38. The augmentation of distillate yield by using concentrator coupled solar still with phase change material10.1016/j.desal.2013.01.018 ↗
39. Phase change material on augmentation of fresh water production using pyramid solar still10.14710/ijred.2.3.115-120 ↗
40. Enhancement of fresh water production on triangular pyramid solar still using phase change material as storage material10.5098/hmt.5.3 ↗
41. Effect of water mass on triangular pyramid solar still using phase change material as storage Medium10.1016/j.egypro.2014.12.114 ↗
42. Water solar distiller productivity enhancement using concentrating solar water heater and phase change material (PCM)10.1016/j.csite.2015.03.009 ↗
43. Experimental investigation of a passive solar still with paraffin wax as latent heat storage
44. Exergy analysis of solar desalination still combined with heat storage system using phase change material (PCM)10.1016/j.desal.2015.11.031 ↗
45. Experimental performance analysis of a solar distillation system with PCM storage
46. Improving the performance of solar still by using PCM as a thermal storage medium under Egyptian conditions10.1016/j.desal.2016.01.006 ↗
47. The performance of a modified solar still using hot air injection and PCM10.1016/j.desal.2015.11.007 ↗
48. Experimental investigation of thermal performance of flat and v-corrugated plate solar air heaters with and without PCM as thermal energy storage10.1016/j.enconman.2016.01.068 ↗
49. An experimental investigation of a v-corrugated absorber single-basin solar still using PCM10.1016/j.desal.2016.07.042 ↗
50. Performance assessment and productivity of a simple-type solar still integrated with nanocomposite energy storage system10.1016/j.apenergy.2016.09.002 ↗
51. D. Dsilva Winfred Rufuss, S. Iniyan, L. Suganthi, P.A. Davies, T. Akinaga, Analysis of solar still with nanoparticle incorporated phase change material for solar desalination application, in: Proceedings of ISES Sol. World Congr. 2015, International Solar Energy Society, Daegu; South Korea, 2015: pp. 1271–1280 〈http://dx.doi.org/10.18086/swc.2015.10.44〉.10.18086/swc.2015.10.44 ↗
52. Modeling and analysis the productivity of solar desalination units with phase change materials10.1016/j.renene.2016.04.013 ↗
53. Comparative study of two weir type cascade solar stills with and without PCM storage using energy and exergy analysis10.1016/j.enconman.2016.11.044 ↗
54. Effect of phase change material on concentric circular tubular solar still-Integration meets enhancement10.1016/j.desal.2017.03.035 ↗
55. The effects of flake graphite nanoparticles, phase change material, and film cooling on the solar still performance10.1016/j.apenergy.2017.01.067 ↗
56. Observational study of modified solar still coupled with oil serpentine loop from cylindrical parabolic concentrator and phase changing material under basin10.1016/j.solener.2017.01.007 ↗
57. Experimental investigation of a solar still equipped with an external heat storage system using phase change materials and heat pipes10.1016/j.desal.2017.01.023 ↗
58. Application of the analytical hierarchy process in the selection of desalination plants10.1016/j.desal.2004.09.005 ↗
59. Measuring the efficiency of decision making units10.1016/0377-2217(78)90138-8 ↗
60. Measuring the relative efficiency of hydrogen energy technologies for implementing the hydrogen economy: an integrated fuzzy AHP/DEA approach10.1016/j.ijhydene.2011.06.135 ↗
61. A fuzzy analytic hierarchy process (AHP)/data envelopment analysis (DEA) hybrid model for efficiently allocating energy R&D resources: in the case of energy technologies against high oil prices10.1016/j.rser.2012.12.067 ↗
62. Photovoltaic power stations in Germany and the United States: a comparative study by data envelopment analysis10.1016/j.eneco.2014.01.004 ↗
63. DEA (Data Envelopment Analysis) assessment of operational and environmental efficiencies on Japanese regional industries10.1016/j.energy.2013.12.020 ↗
64. On the feasibility of using emergy analysis as a source of benchmarking criteria through data envelopment analysis: a case study for wind energy10.1016/j.energy.2014.01.109 ↗
65. Optimization of energy required and greenhouse gas emissions analysis for orange producers using data envelopment analysis approach10.1016/j.jclepro.2013.08.019 ↗
66. A quantitative discussion on the assessment of power supply technologies: DEA (data envelopment analysis) and SAW (simple additive weighting) as complementary methods for the “Grammar”10.1016/j.energy.2013.10.022 ↗
67. Which is the best solar thermal collection technology for electricity generation in north-west India? Evaluation of options using the analytical hierarchy process10.1016/j.energy.2010.07.042 ↗
68. Enhanced phase change material (NPCM) as heat storage in solar still application for productivity enhancement10.1016/j.egypro.2017.11.009 ↗
69. Experimental investigation of solar desalination system with roof heating
70. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review10.1016/j.rser.2010.08.007 ↗
71. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
72. Performance of a double condensing multiple wick solar still10.1016/0196-8904(84)90028-1 ↗
73. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
74. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
75. Thermal conductivity enhancement of recycled high density polyethylene as a storage media for latent heat thermal energy storage10.1016/j.solmat.2016.02.022 ↗
76. Natural Magnetite for thermal energy storage: excellent thermophysical properties, reversible latent heat transition and controlled thermal conductivity10.1016/j.solmat.2016.12.006 ↗
77. Modeling and experimental study of a corrugated wick type solar still: comparative study with a simple basin type10.1016/j.enconman.2015.09.006 ↗
78. Experimental and numerical studies of thermal performance enhancement in the receiver part of solar parabolic trough collectors10.1016/j.rser.2017.01.171 ↗
79. A review on phase change energy storage: materials and applications10.1016/j.enconman.2003.09.015 ↗
80. Synthesis and characterization of multifunctional energy composite: solar absorber and latent heat storage material of high thermal conductivity10.1016/j.solmat.2016.12.010 ↗
81. Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability10.1016/j.solmat.2017.08.025 ↗
82. Effect of graphene aerogel on thermal behavior of phase change materials for thermal management10.1016/j.solmat.2013.01.046 ↗
83. Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes10.1016/j.enconman.2016.12.053 ↗
84. Thermal conductivity enhancement of paraffin by adding boron nitride nanostructures: a molecular dynamics study10.1016/j.applthermaleng.2016.09.065 ↗
85. Thermal conductivity enhancement in a latent heat storage system10.1016/j.solener.2006.11.009 ↗
86. Heat transfer enhancement in a latent heat storage system10.1016/S0038-092X(98)00128-5 ↗
87. Performance enhancement in latent heat thermal storage system: a review10.1016/j.rser.2009.06.024 ↗
88. A review on thermal conductivity enhancement of paraffinwax as latent heat energy storage material10.1016/j.rser.2016.06.071 ↗
89. Influence of additives on thermal conductivity of shape-stabilized phase change material10.1016/j.solmat.2005.09.007 ↗
90. Properties of form-stable paraffin/silicon dioxide/expanded graphite phase change composites prepared by sol-gel method10.1016/j.apenergy.2011.11.018 ↗
91. High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets10.1016/j.solmat.2008.09.010 ↗
92. Investigation of exfoliated graphite nanoplatelets (xGnP) in improving thermal conductivity of paraffin wax-based phase change material10.1016/j.solmat.2011.01.048 ↗
93. Evaluation of PCM/diatomite composites using exfoliated graphite nanoplatelets (xGnP) to improve thermal properties10.1007/s10973-013-3008-4 ↗
94. Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite10.1016/j.solmat.2010.09.032 ↗
95. Energy efficient thermal storage montmorillonite with phase change material containing exfoliated graphite nanoplatelets10.1016/j.solmat.2015.03.010 ↗
96. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material10.1016/j.applthermaleng.2006.11.004 ↗
97. Heat transfer characteristics of phase change nanocomposite materials for thermal energy storage application10.1016/j.ijheatmasstransfer.2014.03.054 ↗
98. Thermal performance of a high conductive shape-stabilized thermal storage material10.1016/S0927-0248(01)00056-3 ↗
99. Silicon nanoparticles-graphene paper composites for Li ion battery anodes10.1039/b919738a ↗
100. Improving thermal conductivity phase change materials - A study of paraffin nanomagnetite composites10.1016/j.solmat.2015.01.027 ↗