journal article·2016-02

Contact formation of front side metallization in p-type, single crystalline Si solar cells: Microstructure, temperature dependent series resistance and percolation model

Praveen Kumar, Michael Pfeffer, Benjamin Willsch, Oliver Eibl

Publisher page

Abstract

Abstract Screen printed front side contacts were investigated in single-crystalline (planar and textured) Si solar cells with n-type emitters, yielding maximum efficiencies of 18.0%. The crystallographic orientation of the Si surface and the paste strongly affect the contact formation as well as the contact resistance of the cells. For textured cells a continuous glass layer together with the formation of Ag colloids yielded a small contact resistance. Planar 〈111〉oriented Si yielded specifically lower contact resistance (〈5 mΩ cm 2 ) as compared to planar 〈100〉 orientation (〉10–40 mΩ cm 2 ) for different pastes. Pyramidal Ag crystals are formed only on 〈100〉 oriented Si, whereas lens shaped Ag crystals are grown on 〈111〉surfaces. From this it was concluded that the shape of the Ag nanocrystals determines the contact resistance, pyramidal Ag crystals formed on 〈100〉 planar surfaces yielded cells with large contact resistance and are, therefore, not considered to be necessary for a low contact resistance. Temperature dependent series resistance measurements yielded metallic behavior for cells with the lowest contact resistance bound to a certain paste. For other pastes and processing conditions a semiconducting behavior of the series resistance was found. However, cells with significant density of colloids in the glass layer yielded a small series and contact resistance. By considering the above arguments, a percolation model has been introduced in which metallic Ag colloids generate current filaments across the glass layer. This reduces the resistivity of the glass layer and thereby introduces a percolative nature of the current via Ag nanocolloids. The percolation limit for the 2d case was calculated for periodically arranged colloids with equal size and yields a minimum volume fraction of 15% for the Ag colloids in the glass layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. High-temperature contact formation on n-type silicon: basic reactions and contact model for seed-layer contacts10.1002/adfm.200901305 ↗
2. A. Mette, New Concepts for Front Side Metallization of Industrial Silicon Solar Cells, Production, 2007.
3. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
4. G. Schubert, Thick Film Metallisation of Crystalline Silicon Solar Cells, 2006.
5. Surface states and rectification at a metal semi-conductor contact10.1103/PhysRev.71.717 ↗
6. Solar cell contact resistance-a review10.1109/T-ED.1984.21583 ↗
7. Surface states and barrier height of metal-semiconductor systems10.1063/1.1702952 ↗
8. A model for specific contact resistance applicable for titanium silicide-silicon contacts10.1016/0038-1101(96)00091-3 ↗
9. Schottky barrier height—do we really understand what we measure?10.1116/1.586967 ↗
10. Recent advances in Schottky barrier concepts10.1016/S0927-796X(01)00037-7 ↗
11. Electronic properties of nanoscale silver crystals at the interface of silver thick film contacts on n-type silicon10.1063/1.3508950 ↗
12. Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating10.1002/pip.855 ↗
13. C. Khadilkar, S. Sridharan, D. Gnizak, T. Pham, S. Kim, A. Shaikh, Effect of glass chemistry and silicon orientation on the front contact microstructure formation in a silicon solar cell, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference and Exhibition, 2005, p. 1291.
14. Electron microscopy study of front-side Ag contact in crystalline Si solar cells
15. Microstructural comparison of silicon solar cells’ front-side Ag contact and the evolution of current conduction mechanisms10.1063/1.3642956 ↗
16. Investigation of Ag-bulk/glassy-phase/Si heterostructures of printed Ag contacts on crystalline Si solar cells10.1016/j.solmat.2008.02.032 ↗
17. Simulating the interface morphology of silver thick film contacts on n-type Si-(100) and Si-(111)10.1063/1.4752228 ↗
18. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
19. Effect of surface morphology on screen printed solar cells10.1016/j.cap.2009.05.005 ↗
20. Effect of oxygen environment on formation of modulated Ag nanostructures along the interface of a Ag–Si heterostructure10.1063/1.4803872 ↗
21. Series and contact resistance measurements between 80K and room temperature for industrial solar cells10.1016/j.egypro.2015.03.287 ↗
22. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
23. Mechanism underlying the beneficial effect of forming gas annealing on screen-printed Ag contacts of crystalline Si solar cells10.1016/j.actamat.2014.02.023 ↗
24. Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells10.1007/s11664-006-0311-x ↗
25. Development of screen-printed silicon solar cells with high fill factors on 100Ω/sq emitters10.1109/TED.2004.828280 ↗
26. Understanding the formation and temperature dependence of thick-film Ag contacts on high-sheet-resistance Si emitters for solar cells10.1149/1.2001507 ↗
27. Combined microstructural and electrical characterization of metallization layers in industrial solar cells10.1016/j.egypro.2015.03.285 ↗
28. Thick-film metallization for solar cell applications10.1109/T-ED.1984.21575 ↗
29. The nature of screen printed front side silver contacts−Results of the project mikrosol10.1016/j.egypro.2013.11.085 ↗
30. Impact of screen printing silver paste components on the space charge region recombination losses of industrial silicon solar cells10.1016/j.solmat.2012.06.040 ↗
31. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
32. Calculating the specific contact resistance from the nanostructure at the interface of silver thick film contacts on n-type silicon10.1063/1.3635383 ↗
33. A. Ebong, D. Hankey, L. Yang, Developing the next generation low-cost inks for high efficiency multi crystalline silicon solar cells, 0001, 2013, pp. 66–71.10.1109/HONET.2013.6729759 ↗