Reel-to-reel wet coating by variation of solvents and compounds of photoactive inks for polymer solar cell production
Source abstract
Abstract
Abstract In this paper we report about some aspects and the progress reached in the reel-to-reel (R2R) solvent-based production of polymer solar cells. In awareness of the huge advantages in energy and material savings the hole-injection and the photoactive layer were successfully prepared by continuous slot-die wet coating of low viscosity inks. The objective was to obtain higher values of light power conversion efficiencies for reducing the gap between production under optimal laboratory conditions via spin-coating on rigid substrates in comparison to the more robust and practically significant large-scale coating of flexible substrates. For this purpose, solvent systems were varied and a new fullerene used as electron–acceptor, leading to the highest light power conversion efficiencies ( η =4.55%) described for polymer solar cells (PSCs) on flexible substrates up to now. PSCs manufactured from continuously coated foils by using a small-scale laboratory R2R-coating machine yield a maximum value of η =3.2%. With respect to environmental, safety and technological demands, reel-to-reel wet coating with a change to non-halogenated inks was also successfully carried out in order to learn more about its technological suitability and to allow the transfer of the results afterwards to other, more efficient material systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · solar cell performance optimization · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
2. Polymer–fullerene bulk heterojunction solar cells
3. Polymer-based solar cells: state-of-the-art principles for the design of active layer components10.1515/green.2011.002 ↗
4. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
5. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
6. New conjugated polymers for plastic solar cells10.1039/c1ee01072g ↗
7. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
8. Synthesis and characterization of a novel fullerene derivative containing carbazole group for use in organic solar cells10.1016/j.synthmet.2011.04.031 ↗
9. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
10. Endohedral fullerenes for organic photovoltaic devices10.1038/nmat2379 ↗
11. Material solubility-photovoltaic performance relationship in the design of novel fullerene derivatives for bulk heterojunction solar cells10.1002/adfm.200801189 ↗
12. Preparation, characterization, functionalization and application of dimeric fullerene oxides10.1080/15363830802672187 ↗
13. Solar cell efficiency tables (Version 38)10.1002/pip.1088 ↗
14. Solar cell efficiency tables (Version 39)10.1002/pip.2163 ↗
15. Low band gap donor–acceptor conjugated polymers toward organic solar cells applications10.1021/ma061760i ↗
16. A high-mobility low-bandgap poly(2,7-carbazole) derivative for photovoltaic applications10.1021/ma900364c ↗
17. Polymer photovoltaics with alternating copolymer/fullerene blends and novel device architectures10.1002/adma.200904407 ↗
18. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
19. Low bandgap polymers for roll-to-roll coated organic photovoltaics–design, synthesis and characterization10.1515/green.2011.005 ↗
20. Synthesis and photovoltaic performance of a series of small band gap polymers10.1039/b821979f ↗
21. Synthesis of new indolocarbazole-acceptor alternating conjugated copolymers and their applications to thin film transistors and photovoltaic cells10.1021/ma802720n ↗
22. Polymer Photovoltaics—A Practical Approach
23. Large area plastic solar cells10.1016/j.mseb.2006.06.008 ↗
24. Thienopyrazine-based low-bandgap polymers for flexible polymer solar cells
25. A new encapsulation solution for flexible organic solar cells10.1016/j.tsf.2005.12.091 ↗
26. High efficiency flexible polymer solar cells based on PET substrates with a nonannealing active layer10.1149/1.3184341 ↗
27. All-solution-processed inverted polymer solar cells on granular surface-nickelized polyimide10.1016/j.orgel.2009.01.012 ↗
28. ITO-free large-area organic solar cells10.1364/OE.18.00A458 ↗
29. Highly conductive PEDOT/silicate hybrid anode for ITO-free polymer solar cells10.1016/j.solmat.2009.11.009 ↗
30. Louwet · 2010
31. Silver nanowire-based transparent, flexible, and conductive thin film
32. Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality10.1364/OE.18.00A272 ↗
33. Ultra-fast and parsimonious materials screening for polymer solar cells using slot-die coating10.1021/am100505e ↗
34. H. Zervos, Barrier films for flexible electronics: needs players and opportunities 2010–2020, 〈http://www.salisonline.org/Reports/id-techex/〉, April 2011.
35. 〈http://www.nanomarkets.net/index.php/news/article/market_for_opv_dsc_substrate_and_encapsulation_materials_to_reach_1.3_billion_by_2017/〉.
36. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
37. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
38. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
39. Up-scaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
40. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
41. Theme article-solution-processed organic solar cells10.1557/mrs2008.138 ↗
42. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
43. Highly flexible printed ITO-free organic photovoltaics
44. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
45. Annealing-free fabrication of P3HT:PCBM solar cells via simple brush painting10.1016/j.solmat.2009.08.017 ↗
46. Gravure printing for three subsequent solar cell layers of inverted structures on flexible substrates10.1016/j.solmat.2010.10.013 ↗
47. High efficient plastic solar cells fabricated with a high-throughput gravure printing method10.1016/j.solmat.2010.05.027 ↗
48. Slot Coating
49. P.M. Schweizer, Verfahren zur gleichzeitigen Mehrfachbeschichtung, in: Proceedings of Fundamentals and Methods in Coating, LSTM Erlangen 2005.
50. Slot Die Coating For Low Viscosity Fluids
51. Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions10.1063/1.359792 ↗
52. Polymer photovoltaic cells: Enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
53. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
54. Three-dimensional nanoscale organization of polymer solar cells10.1039/b900901a ↗
55. Nanostructure and morphology engineering in polymer solar cells
56. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
57. Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells10.1016/j.solmat.2011.09.059 ↗
58. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
59. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
60. Funktionalisierung von Oberflächen mittels Beschichtung aus dem fluiden Zustand10.1002/1521-4052(200110)32:10<795::AID-MAWE795>3.0.CO;2-Q ↗
61. Photovoltaic characteristics of polymer solar cells fabricated by pre-metered coating process10.1364/OE.17.013830 ↗
62. Mechanisms controlling the efficiency of polymer solar cells10.1007/s00339-003-2496-7 ↗
63. Controlling the morphology of nanofiber-P3HT:PCBM blends for organic bulk heterojunction solar cells10.1016/j.orgel.2009.06.018 ↗
64. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
65. The role of conformational transitions on the performance of poly(3-hexylthiophene)/fullerene solar cells10.1016/j.solmat.2008.11.016 ↗
66. Longterm stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
67. High photovoltaic performance of inkjet printed polymer: fullerene blends10.1002/adma.200700911 ↗
68. The fate of thin liquid films after coating
69. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
70. Morphologies of self-organizing regioregular conjugated polymer/fullerene aggregates in thin film solar cells10.1021/ma901895d ↗
71. A review of charge transport and recombination in polymer/fullerene organic solar cells10.1002/pip.791 ↗
72. 〈http://www.kruss.de/en/theory/measurements/contact-angle/wetting-envelope.html〉.
73. Polymeric solar cells based on P3HT:PCBM: role of the casting solvent10.1016/j.solmat.2011.07.039 ↗
74. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
75. Stability of polymer solar cells10.1002/adma.201104187 ↗
76. Definition of encapsulation barrier requirements: a method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
77. 〈http://www.energy-sunbags.de〉.
78. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
79. Strategies for incorporation of polymer photovoltaics into garments and textiles10.1016/j.solmat.2005.06.003 ↗
80. Patent WO002004074401A1, Textile surface structure comprising an arrangement of a plurality of conductive threads or threads exhibiting conductive properties and method for the production thereof.
81. How far can polymer solar cells go? In need of a synergistic approach10.1021/jz201479b ↗