Loss of wire tension in the wire web during the slurry based multi wire sawing process
Source abstract
Abstract
Abstract In the multi wire sawing process the wire tension is an important parameter for reliability and wafer quality. Changes of wire quality and wire tension from one end of a wire web in a multi wire saw to the other are investigated by several methods: wire tension measurements in the wire saw, wire elongation during an industrial process and material testing of representative wires. Two mechanisms for the loss of wire tension are identified. Firstly, the decrease of wire diameter due to abrasion causes a slow loss of wire tension along the whole wire web. Secondly, plastic deformation of the wire due to random overloading leads to a fast decrease of the wire tension within the first few centimeters of the wire web. Both effects are confirmed by modeling and calculations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Mechanical stress and fatigue analysis · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. F. Henley, S. Kang, A. Brailove, A. Fujisaka, Kerf-free wafering for high-volume, high-efficiency c-Si cell, in: Proceedings of the 26th PVSEC, Hamburg, 2011.
2. New crystalline silicon ribbon materials for photovoltacis
3. Basic mechanisms and models of multiwire sawing10.1002/adem.200400578 ↗
4. O. Anspach, B. Hurka, J. Zeh, F.-W. Schulze, Influence of abrasive shape and size distribution on the wire sawing process, in: Proceedings of the 24th PVSEC, Hamburg, 2009.
5. The solar cell wafering process
6. D. Meißner, B. Hurka, R. Rietzschel, H.J. Möller, O. Anspach, Ideal combination of wire diameter and SiC-grain size in the multi wire sawing process, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 2012.
7. STANDARD DIN EN 10002-1, Metallische Werkstoffe - Zugversuch, Teil 1: Prüfverfahren bei Raumtemperatur; 2001.
8. W. Schatt, Einführung in die Werkstoffwissenschaft, 7. Auflage, 1991, S, 394–399.
9. E. Bocharova, Mechanisch legierte hochfeste nanokristalline Cu-Nb-Leitermaterialien, Dissertation, 2005, S. 18.
10. Clarebrough · Philosophical Magazine · 1961 · 6 · 80710.1080/14786436108238374 ↗
11. Dmitriev · Low Temperature Physics · 2005 · 31 · 7310.1063/1.1820371 ↗
12. J. Nieburg, G. Lindner, Physikalische Meßtechnik mit Sensoren, 5, Auflage, 2002, S. 155.
13. M., Koster, D. Eifler, Ultraschallermüdung und Wechselverformungsverhalten von Stahl im VHCF-Bereich, DVM-Bericht, Konstruktion, Werkstoffentwicklung und Schadensanalyse, Werkstoffprüfung, 28, 2010.
14. H. Schumann, Metallographie, 13, Auflage, 1991.
15. O. Anspach, M. Berg, F.-W. Schulze, Experimental setup for investigations on the wire sawing process, in: Proceedings of the 10th Scientific and Business Conference SILICON, Rožnov pad Radhoštěm, Czech Republic, 2006.
16. T. Wagner, T. Behm, R. Rietzschel, S. Kaminski, C. Funke, H.J. Möller, Spatial distribution of wafer subsurface damage induced by wire sawing, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 2010.
17. The importance of temperature control during crystallization and wafering in silicon solar cell production
18. J. Solyom, Fundamentals of the Physics of Solids, vol. 2 — Electronic Properties, S. 8.
19. G.R. Taylor, Acar Isin, R.V. Coleman, Physical Review, 165 (2) (1968) 621.10.1103/PhysRev.165.621 ↗
20. D.R. Lide, CRC Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical, Physical Data, 90 Auflage, 2009.
21. Tanaka, T. Watanabe, Japanese Journal of Applied Physics 11 (1972) 1429--1439.10.1143/JJAP.11.1429 ↗
22. R.A. Brown, Journal of Physics F: Metal Physics 7 (1977) 1283.10.1088/0305-4608/7/7/026 ↗