Chloroboron subphthalocyanine/C60 planar heterojunction organic solar cell with N,N-dicarbazolyl-3,5-benzene blocking layer
Source abstract
Abstract
Abstract A planar heterojunction organic solar cell (OSC) with high internal quantum efficiency (IQE=95.6% at 590 nm) was demonstrated based on boron subphthalocyanine chloride (SubPc) and C 60 as the electron donor and acceptor materials. A thin layer of N,N-dicarbazolyl-3,5-benzene (mCP), acting as an electron and exciton blocking layer, was inserted between the ITO anode and the SubPc layer to prevent leakage current and exciton quenching. In the optimized device, a mCP thickness of 3 nm was thick enough to block the excitons (as suggested by a high IQE and longer-lived photoluminescence), resulting in an open circuit voltage of 1.09 V, a short circuit current of 7.87 mA/cm 2 , a fill factor of 59, and a power conversion efficiency of 5.08%. Increasing the mCP thickness resulted in increased serial resistance and SubPc crystallization that reduced the fill factor, V OC , and J SC . Due to the narrow absorption band of SubPC (71 nm at the full-width-at-half-maximum), this high performance (both in peak IQE and V OC ) device has the potential to be used as a subcell in a spectral splitting solar cell module.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
2. Influence of D/A ratio on photovoltaic performance of a highly efficient polymer solar cell system10.1002/adma.201202719 ↗
3. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
4. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
5. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
6. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
7. Enhancing the photocurrent in diketopyrrolopyrrole-based polymer solar cells via energy level control10.1021/ja305358z ↗
8. Fused dithienogermolodithiophene low band gap polymers for high-performance organic solar cells without processing additives10.1021/ja311700u ↗
9. High-mobility low-bandgap conjugated copolymers based on indacenodithiophene and thiadiazolo[3,4-c]pyridine units for thin film transistor and photovoltaic applications10.1039/c1jm11564b ↗
10. Strong internal and external luminescence as solar cells approach the Shockley–Queisser limit10.1109/JPHOTOV.2012.2198434 ↗
11. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
12. Photonic design principles for ultrahigh-efficiency photovoltaics10.1038/nmat3263 ↗
13. Lateral spectrum splitting concentrator photovoltaics: direct measurement of component and submodule efficiency10.1002/pip.1194 ↗
14. Comparison of short and long wavelength absorption electron donor materials in C60-based planar heterojunction organic photovoltaics10.1016/j.orgel.2012.06.006 ↗
15. High open-circuit voltage planar heterojunction organic photovoltaics exhibiting red electroluminescence10.1149/2.071202jes ↗
16. Investigation of interface properties for ClAlPc/C60 heterojunction-based inverted organic solar cell10.1021/jp210533n ↗
17. Tin naphthalocyanine complexes for infrared absorption in organic photovoltaic cells10.1016/j.orgel.2012.12.032 ↗
18. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
19. Can morphology tailoring improve the open circuit voltage of organic solar cells?10.1063/1.3672221 ↗
20. Random vs regularized OPV: Limits of performance gain of organic bulk heterojunction solar cells by morphology engineering10.1016/j.solmat.2011.11.042 ↗
21. Charge separation at molecular donor-acceptor interfaces: correlation between morphology and solar cell performance10.1109/JSTQE.2010.2048096 ↗
22. Measurements of efficiency losses in blend and bilayer-type zinc phthalocyanine/C60 high-vacuum-processed organic solar cells10.1021/jp3054422 ↗
23. Graded donor-acceptor heterojunctions for efficient organic photovoltaic cells10.1002/adma.201002454 ↗
24. Efficient organic photovoltaic cells based on nanocrystalline mixtures of boron subphthalocyanine chloride and C6010.1002/adfm.201101948 ↗
25. Influence of surface morphology evolution of SubPc layers on the performance of SubPc/C60 organic photovoltaic cells10.1063/1.3660710 ↗
26. Highly flexible inverted organic solar cells with improved performance by using an ultrasmooth Ag cathode10.1063/1.4755774 ↗
27. Broad spectral sensitivity and improved efficiency in CuPc/Sub-Pc organic photovoltaic devices10.1088/0022-3727/42/1/015103 ↗
28. The energy of charge-transfer states in electron donor–acceptor blends: insight into the energy losses in organic solar cells10.1002/adfm.200900090 ↗
29. Photovoltaic efficiency limits and material disorder10.1039/c2ee03178g ↗
30. Competition between the charge transfer state and the singlet states of donor or acceptor limiting the efficiency in polymer:fullerene solar cells10.1021/ja210029w ↗
31. Open-circuit voltage in organic solar cells10.1039/c2jm33719c ↗
32. Thermodynamic efficiency limit of excitonic solar cells10.1103/PhysRevB.83.195326 ↗
33. Optimal energy offsets for organic solar cells containing a donor/acceptor pair10.1016/j.solmat.2004.05.005 ↗
34. Boron subphthalocyanine chloride as an electron acceptor for high-voltage fullerene-free organic photovoltaics10.1002/adfm.201101782 ↗
35. Enhanced photocurrent and open-circuit voltage in a 3-layer cascade organic solar cell10.1063/1.4757575 ↗
36. Halogenated boron subphthalocyanines as light harvesting electron acceptors in organic photovoltaics10.1002/aenm.201100036 ↗
37. Perfluorinated subphthalocyanine as a new acceptor material in a small-molecule bilayer organic solar cell10.1002/adfm.200900524 ↗
38. Boron subphthalocyanines as organic electronic materials10.1021/am3015197 ↗
39. A 4% efficient organic solar cell using a fluorinated fused subphthalocyanine dimer as an electron acceptor10.1002/aenm.201100137 ↗
40. Enhancement in open circuit voltage through a cascade-type energyband structure10.1063/1.2817935 ↗
41. Influence of the highest occupied molecular orbital energy level of the donor material on the effectiveness of the anode buffer layer in organic solar cells10.1002/pssa.201127047 ↗
42. Improved the efficiency of small molecule organic solar cell by double anode buffer layers10.1016/j.solmat.2011.08.006 ↗
43. Cascade organic solar cells10.1021/cm200525h ↗
44. Organic solar cells employing electrodeposited nickel oxide nanostructures as the anode buffer layer10.1016/j.solmat.2012.01.041 ↗
45. , Effect of MoO3 as an interlayer on the performance of organic solar cells based on ZnPc and C6010.1016/j.synthmet.2011.10.014 ↗
46. Small molecular organic photovoltaic cells with exciton blocking layer at anode interface for improved device performance10.1063/1.3650472 ↗
47. Short circuit current improvement in planar heterojunction organic solar cells by multijunction charge transfer
48. Efficiency improvements in single-heterojunction organic photovoltaic cells by insertion of wide-bandgap electron-blocking layers10.1016/j.sse.2012.04.025 ↗
49. Open-circuit voltage and efficiency improvement of subphthalocyanine-based organic photovoltaic device through deposition rate control10.1016/j.solmat.2012.04.005 ↗
50. Molecular and morphological influences on the open circuit voltages of organic photovoltaic devices10.1021/ja9007722 ↗
51. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
52. Exciton diffusion length and lifetime in subphthalocyanine films10.1021/jp809802q ↗
53. Synthesis and nonlinear optical, photophysical, and electrochemical properties of subphthalocyanines10.1021/ja980508q ↗
54. Enhanced open-circuit voltage in subphthalocyanine/C60 organic photovoltaic cells10.1021/ja061655o ↗
55. Electro-optical study of subphthalocyanine in a bilayer organic solar cell10.1002/adfm.200700398 ↗
56. Influence of a MoOx interlayer on the open-circuit voltage in organic photovoltaic cells10.1063/1.4817075 ↗
57. Increased efficiency in small molecule organic photovoltaic cells through electrode modification with self-assembled monolayers10.1039/c1ee00005e ↗
58. Utilizing n-type vanadium oxide films as hole-extracting layers for small molecule organic photovoltaics10.1063/1.3607478 ↗
59. The effect of a MoOx hole-extracting layer on the performance of organic photovoltaic cells based on small molecule planar heterojunctions10.1016/j.orgel.2010.09.014 ↗
60. Efficient, bulk heterojunction organic photovoltaic cells based on boron subphthalocyanine chloride-C7010.1063/1.4737902 ↗
61. Strategies for increasing the efficiency of heterojunction organic solar cells: material selection and device architecture10.1021/ar9000923 ↗
62. Absorbing visible light materials of subphthalocyanine and C70 for efficient planar-mixed organic photovoltaic devices10.1149/2.041301jes ↗
63. Tailored exciton diffusion in organic photovoltaic cells for enhanced power conversion efficiency10.1038/nmat3467 ↗