Ga homogenization by simultaneous H2Se/H2S reaction of Cu-Ga–In precursor
Source abstract
Abstract
Abstract The compositional distribution of Ga and S in Cu(InGa)(SeS) 2 films fabricated by a simultaneous selenization and sulfization process was systematically investigated. At low H 2 Se/H 2 S reaction temperature (490 °C), most Ga remains at the back of the film adjacent to the Mo back contact. However, the Ga/III ratios at the top and bottom of the Cu(InGa)(SeS) 2 layer monotonically increase and decrease with reaction temperatures, respectively. At T >550 °C, homogeneous distribution of elemental Ga and In through film is achieved. Further increase of the reaction temperature (e.g., T >550 °C) causes phase segregation on the surface of the Cu(InGa)(SeS) 2 film confirmed by XRD, GIXRD and EDS analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. Interface control to enhance the fill factor over 0.70 in a large-area CIS-based thin-film PV technology10.1016/j.tsf.2008.10.125 ↗
2. Role of incorporated sulfur into the surface of Cu(InGa)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
3. Incongruent reaction of Cu-(InGa) intermetallic precursors in H2Se and H2S10.1063/1.2787151 ↗
4. Material and device properties of single-phase Cu(In,Ga)(Se,S)2 alloys prepared by selenization/sulfurization of metallic alloys10.1016/j.tsf.2003.10.092 ↗
5. G.M. Hanket, R. Kamada, W.K. Kim and W.N. Shafarman, Effect of reaction temperature on Cu(InGa)(SeS)2 formation by a sequential H2Se/H2S precursor reaction process, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference, San Diego, May 12–16, 2008.
6. Chemical reaction analysis of copper indium selenization10.1002/(SICI)1099-159X(199609/10)4:5<341::AID-PIP144>3.0.CO;2-C ↗