Effect of incidence angle and polarization on the optimized layer structure of organic solar cells
Source abstract
Abstract
Abstract We theoretically and experimentally investigate the effect of the incidence angle and polarization of sunlight on the optimized layer structure of organic solar cells (OSCs) to obtain the best absorption efficiency in a realistic deployment situation. We use the generalized transfer matrix method with respect to the incidence angle and polarization, which can calculate the spatial distribution of the optical power dissipation in both the incoherent glass substrate and the coherent multilayer without using any indirect correction factor. The angular dependence of the short-circuit current, the open-circuit voltage, and the output electric power is calculated and compared with the experimental results. Using the simulation parameters matched with the experimental results, we calculate the generation energy density per day by considering the variation of the incidence angle during daytime and determine the optimized thickness of the active region for maximum absorption efficiency. We show that the optimized active-region thickness based on the generation energy density per day is different from that determined from the variation of the short-circuit current density in only normal incidence, which is generally used for optimizing device structure of OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
2. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
3. Quantum efficiency of exciton-to-charge generation in organic photovoltaic devices10.1063/1.1359425 ↗
4. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
5. Optical optimization of polyfluorene-fullerene blend photodiodes10.1063/1.1836005 ↗
6. Investigation of optical spacer layers from solution based precursors for polymer solar cells using X-ray reflectometry10.1016/j.optmat.2008.11.014 ↗
7. Optical modeling and analysis of organic solar cells with coherent multilayers and incoherent glass substrate using generalized transfer matrix method10.1143/JJAP.50.122301 ↗
8. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
9. Angular dependence of external and internal quantum efficiencies in bulk-heterojunction organic solar cells10.1063/1.2777724 ↗
10. The angular response of ultrathin film organic solar cells10.1063/1.2949745 ↗
11. The effect of angle of incidence on the optical field distribution within thin film organic solar cells10.1063/1.3253718 ↗
12. Optical modeling for polarization-dependent optical power dissipation of thin-film organic solar cells at oblique incidence10.3807/JOSK.2012.16.1.006 ↗
13. Full day modelling of V-shaped organic solar cell10.1016/j.solener.2010.10.017 ↗
14. The coherence length of black-body radiation10.1088/0143-0807/19/3/006 ↗
15. Generalized matrix method for analysis of coherent and incoherent reflectance and transmittance of multilayer structures with rough surfaces, interfaces, and finite substrates10.1364/AO.34.001678 ↗
16. General transfer-matrix method for optical multilayer systems with coherent, partially coherent, and incoherent interference10.1364/AO.41.003978 ↗
17. Determination of the degradation constant of bulk heterojunction solar cells by accelerated lifetime measurements10.1007/s00339-003-2499-4 ↗
18. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
19. Device model for the operation of polymer/fullerene bulk heterojunction solar cells10.1103/PhysRevB.72.085205 ↗
20. Cesium carbonate as a functional interlayer for polymer photovoltaic devices10.1063/1.2937202 ↗
21. Electrical properties of inverted poly(3-hexylthiophene):methano-fullerene [6,6]-phenyl C71-butyric acid methyl ester bulk hetero-junction solar cell with Cs2CO3 and MoO3 layers10.1016/j.solmat.2011.07.008 ↗
22. Design of organic tandem solar cells using PCPDTBT:PC61BM and P3HT:PC71BM10.1063/1.3448271 ↗
23. Non-Langevin bimolecular recombination in low-mobility materials10.1016/j.jnoncrysol.2005.11.099 ↗
24. Polaron recombination in pristine and annealed bulk heterojunction solar cells10.1063/1.3005593 ↗
25. Coupled optoelectronic simulation of organic bulk-heterojunction solar cells: parameter extraction and sensitivity analysis10.1063/1.3259367 ↗
26. A computational study on optimal design for organic tandem solar cells10.1016/j.solmat.2010.12.018 ↗
27. Depth profile characterization of spin-coated poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS) films by spectroscopic ellipsometry10.1002/pssc.201001218 ↗
28. Highly efficient polycarbazole-based organic photovoltaic devices10.1063/1.3182797 ↗
29. Spectroscopic ellipsometry characterization of polymer–fullerene blend films10.1016/j.tsf.2008.05.038 ↗
30. Optical properties of conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites10.1063/1.2799049 ↗
31. Accounting for interference, scattering, and electrode absorption to make accurate internal quantum efficiency measurements in organic and other thin solar cells10.1002/adma.201000883 ↗
32. Degradation of poly(3-hexylthiophene):methano-fullerene [6,6]-phenyl-C71 butyric acid methyl ester bulk heterojunction solar cells and annealing effect on the degraded devices
33. Improving optical performance of inverted organic solar cells by microcavity effect10.1063/1.3262967 ↗
34. Effects of metal electrode reflection and layer thicknesses on the performance of inverted organic solar cells10.1016/j.solmat.2009.12.017 ↗