Na2FePO4F/multi-walled carbon nanotubes for lithium-ion batteries: Operando Mössbauer study of spray-dried composites
Source abstract
Abstract
Abstract In order to favor electronic conductivity in sodium iron fluorophosphate electrodes for lithium- or sodium-ion batteries, composites of Na2FePO4F with multi-walled carbon nanotubes (CNTs) were prepared by pilot-scale spray drying. Addition of multi-walled CNTs in the solution results in an excellent dispersion of the CNTs within the volume of Na2FePO4F and not only at the surface of the particles. Following a heat treatment at 600 °C in argon in order to reach crystallization, X-ray diffraction and ex situ Mossbauer spectroscopy revealed the presence of significant amounts of Fe(III) and maghemite (γ-Fe2O3) in the powder. However, Na2FePO4F/CNTs composites exhibit good electrochemical performance when cycling against lithium, with a discharge capacity of 104 mA h g−1 at C/10 rate and 90 mA h g−1 at 1C rate. Therefore, operando 57Fe transmission Mossbauer spectroscopy analyses were carried out in order to investigate the evolution of the iron oxidation state during cycling. During the first discharge, all the Fe(III) is reduced to Fe(II), explaining the good electrochemical performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
2. Particle shapes and surface structures of olivine NaFePO4 in comparison to LiFePO410.1039/C4CP02356K ↗
3. A multifunctional 3.5V iron-based phosphate cathode for rechargeable batteries10.1038/nmat2007 ↗
4. Na2FePO4F cathode utilized in hybrid-ion batteries: a mechanistic exploration of ion migration and diffusion capability10.1039/c3ta14472k ↗
5. Synthesis of Na2FePO4F/C and its electrochemical performance10.1016/j.ceramint.2012.12.044 ↗
6. Sol–gel synthesis and electrochemical properties of fluorophosphates Na2Fe1−xMnxPO4F/C (x=0,0.1,0.3,0.7,1) composite as cathode materials for lithium ion battery10.1039/c1jm13578c ↗
7. crystal structure and electrochemical properties of A2MPO4F fluorophosphates (A=Na,Li; M=Fe,Mn,Co,Ni)10.1021/cm902023h ↗
8. Ionothermal synthesis of sodium-based fluorophosphate cathode materials10.1149/1.3236480 ↗
9. L.F. Nazar, M. Makahnouk, B. Ellis, K. Toghill, Y. Makimura, Mixed lithium/sodium iron fluorophosphate cathode materials for lithium-ion batteries, (2008) 31 pp., http://eprints.lancs.ac.uk/71774/.
10. Structure and electrochemistry of NaFePO4 and Na2FePO4F cathode materials prepared via mechanochemical route10.1016/j.materresbull.2014.09.081 ↗
11. Carbon coated hollow Na2FePO4F spheres for Na-ion battery cathodes10.1016/j.jpowsour.2012.09.059 ↗
12. A comparison of crystal structures and electrode performance between Na2FePO4F and Na2Fe0.5Mn0.5PO4F synthesized by solid-state method for rechargeable Na-ion batteries10.5796/electrochemistry.80.80 ↗
13. Lithium and sodium battery cathode materials: computational insights into voltage, diffusion and nanostructural properties10.1039/C3CS60199D ↗
14. Magnetic structure and properties of the rechargeable battery insertion compound Na2FePO4F10.1021/ic402513d ↗
15. Ab initio study of lithium and sodium iron fluorophosphate cathodes for rechargeable batteries10.1063/1.3119704 ↗
16. Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO410.1039/c3ee40914g ↗
17. Spray-drying synthesis of Na2FePO4F/carbon powders for lithium-ion batteries10.1016/j.matlet.2014.05.121 ↗
18. Phase transition studies of sodium deintercalated Na2−xFePO4F (0≤x≤1) by Moessbauer spectroscopy10.1063/1.3561798 ↗
19. A new route for synthesizing C/LiFePO4/multi-walled carbon nanotube secondary particles for lithium ion batteries10.1016/j.ssi.2013.11.023 ↗
20. Carbon nanotube-embedding LiFePO4 as a cathode material for high rate lithium ion batteries10.1016/j.jpowsour.2013.06.090 ↗
21. Facile low-temperature polyol process for LiFePO4 nanoplate and carbon nanotube composite10.1016/j.solidstatesciences.2013.06.015 ↗
22. High-performance LiFePO4 cathode material from FePO4 microspheres with carbon nanotube networks embedded for lithium ion batteries10.1016/j.jpowsour.2012.09.040 ↗
23. In situ growth of coiled carbon nanotubes on LiFePO4 as high performance lithium storage material10.1016/j.jelechem.2014.05.018 ↗
24. Mesoporous LiFePO4 microspheres embedded homogeneously with 3D CNT conductive networks for enhanced electrochemical performance10.1016/j.electacta.2014.06.015 ↗
25. An electrochemical cell for operando study of lithium batteries using synchrotron radiation10.1149/1.3355977 ↗
26. Masters · 1972
27. 1987 · 2
28. Defects in hydrothermally synthesized LiFePO4 and LiFe1−xMnxPO4 cathode materials10.1021/cm4008393 ↗
29. Ball-milling in liquid media: applications to the preparation of anodic materials for lithium-ion batteries10.1016/S0079-6425(03)00050-1 ↗
30. Synthesis and electrochemical performance of reduced graphene oxide/maghemite composite anode for lithium ion batteries10.1016/j.carbon.2012.09.004 ↗
31. Nonstoichiometric LiFePO4: defects and related properties10.1021/cm803408y ↗
32. Defect chemistry of LiFePO410.1149/1.2839626 ↗
33. Improving the cyclability of sodium-ion cathodes by selection of electrolyte solvent10.1016/j.jpowsour.2011.09.008 ↗