Structure-property correlation of poly(ethylene glycol) based form stable phase change materials with different crosslinking structure
Source abstract
Abstract
Abstract Chemical crosslinking is an important strategy for preparation of form stable phase change materials (FSPCMs). However, the influence of different crosslinking structure on the properties of FSPCMs is not very clear currently. In this work, PEG-based FSPCMs are synthesized by free-radical polymerization. They possess different crosslinking densities, and the location of PEG moieties include two different sites (backbone or side chain). The chemical structure, phase change property, crystal structure, mechanical performance, and thermal reliability of the FSPCMs are studied and compared with respect to their different crosslinking structure. It is found that the phase change enthalpy and degree of crystallinity increase with decreasing crosslinking density, and PEG moieties locating in side chain is preferable. With decreasing crosslinking density, the spherulites of the FSPCMs become larger, but always smaller than that of pristine PEG. The results can be explained by the restriction on movement/assembly of PEG moieties by the crosslinking network. The mechanical performance of FSPCMs with PEG moieties located in backbone is preferable than that in side chain. Tensile strength is maximized with poly(ethylene glycol) acrylate (Mn = 12000) as monomer, and elongation at break increases monotonically with decreasing crosslinking density. The findings of this work will contribute to the future design of FSPCMs with optimized overall thermal energy storage and mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Heat transfer enhancement of phase change materials for thermal energy storage applications: a critical review10.1016/j.rser.2017.01.169 ↗
2. Improving thermal conductivity phase change materials—a study of paraffin nanomagnetite composites10.1016/j.solmat.2015.01.027 ↗
3. Colossal barocaloric effects in plastic crystals10.1038/s41586-019-1042-5 ↗
4. Experimental study on the performance of a novel solar water heating system with and without PCM10.1016/j.solener.2018.07.005 ↗
5. Micro encapsulated & form-stable phase change materials for high temperature thermal energy storage10.1016/j.apenergy.2018.02.064 ↗
6. Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage10.1016/j.apenergy.2018.10.036 ↗
7. Imine-linked micron-network polymers with high polyethylene glycol uptake for shaped-stabilized phase change materials10.1039/C6RA05283E ↗
8. Versatility of polyethylene glycol (PEG) in designing solid-solid phase change materials (PCMs) for thermal management and their application to innovative technologies10.1039/C7TA04968D ↗
9. Nanoconfinement effects on thermal properties of nanoporous shape-stabilized composite PCMs: a review10.1016/j.nanoen.2018.09.007 ↗
10. Thermal conductivity enhancement of polyethylene glycol/expanded vermiculite shape-stabilized composite phase change materials with silver nanowire for thermal energy storage10.1016/j.cej.2016.03.068 ↗
11. The form-stable phase change materials based on polyethylene glycol and functionalized carbon nanotubes for heat storage10.1016/j.applthermaleng.2015.07.080 ↗
12. Polyethylene glycol/graphene oxide aerogel shape-stabilized phase change materials for photo-to-thermal energy conversion and storage via tuning the oxidation degree of graphene oxide10.1016/j.enconman.2017.05.037 ↗
13. Thermal and electrical conductivity enhancement of graphite nanoplatelets on form-stable polyethylene glycol/polymethyl methacrylate composite phase change materials10.1016/j.energy.2012.01.011 ↗
14. Polyethylene glycol-enwrapped silicon carbide nanowires network/expanded vermiculite composite phase change materials: form-stabilization, thermal energy storage behavior and thermal conductivity enhancement10.1016/j.solmat.2017.09.013 ↗
15. Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability10.1016/j.solmat.2017.08.025 ↗
16. Shape-stabilized poly(ethylene glycol) (PEG)-cellulose acetate blend preparation with superior PEG loading via microwave-assisted blending10.1016/j.solener.2016.12.056 ↗
17. Fe3O4-functionalized graphene nanosheet embedded phase change material composites: efficient magnetic- and sunlight-driven energy conversion and storage10.1039/C6TA07144A ↗
18. The influence of chain extender on properties of polyurethane-based phase change materials modified with graphene10.1016/j.apenergy.2015.10.174 ↗
19. Thermal energy storage characteristics of poly(styrene-co-maleic anhydride)-graft-PEG as polymeric solid-solid phase change materials10.1016/j.solmat.2016.12.001 ↗
20. Synthesis and characterization of poly(ethylene glycol) acrylate (PEGA) copolymers for application as polymeric phase change materials (PCMs)10.1016/j.reactfunctpolym.2018.05.012 ↗
21. Shape-stabilized phase change materials with high phase change enthalpy based on synthetic comb-like poly(acrylonitrile-co-ethylene glycol) for thermal management10.1007/s11426-017-9119-2 ↗
22. Fabrication and properties of poly(polyethylene glycol octadecylether methacrylate)10.1016/j.tca.2013.10.011 ↗
23. Hyperbranched polyurethane as novel solid-solid phase change material for thermal energy storage10.1016/j.eurpolymj.2006.07.020 ↗
24. Study on the influence of thermal characteristics of hyperbranched polyurethane phase change materials for energy storage10.1002/app.31311 ↗
25. Solid-solid phase-change materials based on hyperbranched polyurethane for thermal energy storage
26. Thermal energy storage using poly(ethylene glycol) incorporated hyperbranched polyurethane as solid-solid phase change10.1021/acs.iecr.7b03330 ↗
27. Two components based polyethylene glycol/thermosetting solid-solid phase change material composites as novel form stable phase change materials for flexible thermal energy storage application10.1016/j.solmat.2017.04.012 ↗
28. Interpenetrating phase change polymer networks based on crosslinked polyethylene glycol and poly(hydroxyethyl methacrylate)10.1016/j.solmat.2015.12.040 ↗
29. Synthesis and characterization of novel solid-solid phase change materials with a polyurethaneurea copolymer structure for thermal energy storage10.1039/C6RA23141A ↗
30. Synthesis and properties of crosslinking halloysite nanotubes/polyurethane-based solid-solid phase change materials10.1016/j.solmat.2017.08.031 ↗
31. Preparation and properties of β-cyclodextrin/4,4′-diphenylmethane diisocyanate/polyethylene glycol (β-CD/MDI/PEG) crosslinking copolymers as polymeric solid-solid phase change materials10.1016/j.solmat.2015.10.031 ↗
32. End group modification of polyethylene glycol (PEG): a novel method to mitigate the supercooling of PEG as phase change material10.1002/er.4356 ↗
33. Polyurea spray coatings: tailoring material properties through chemical crosslinking10.1016/j.porgcoat.2018.07.005 ↗
34. Novel form stable phase change materials based on the composites of polyethylene glycol/polymeric solid-solid phase change material10.1016/j.solmat.2014.11.039 ↗
35. Thermosetting solid-solid phase change materials composed of poly(ethylene glycol)-based two components: flexible application for thermal energy storage10.1016/j.cej.2016.01.096 ↗