journal article·2019-09

Spray-graphitization as a protection method against corrosion by molten nitrate salts and molten salts based nanofluids for thermal energy storage applications

Julien Piquot, Udayashankar Nithiyanantham, Yaroslav Grosu, Abdessamad Faik

Publisher page

Abstract

Abstract Nanoscale science rapidly enters nearly every field of technology providing perspectives of new advanced applications. In the area of thermal energy storage (TES) doping molten salts with small amounts of nanoparticles represents tremendous interest due to the perspective of pronounced enhancement of their thermophysical properties. This is particularly important for the concentrated solar power (CSP) technology where a considerable decrease of investment costs is required. However, the information about materials degradation in direct contact with molten salts based nanofluids is practically absent. In this work, the compatibility of carbon steel A516.Gr70 with NaNO 3 -KNO 3 -Ca(NO 3 ) 2 (15-43-42 wt%) molten salt known as HitecXL doped with SiO 2 nanoparticles was evaluated under thermal cycling conditions. We demonstrate that the presence of nanoparticles in the salt considerably increases the corrosion rates even for carbon steel protected by spray-graphitization method – the anti-corrosion method capable of reducing the corrosion rates for nanoparticles-free-HitecXL under similar conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Thermal energy storage: recent developments and practical aspects10.1016/j.pecs.2015.10.003 ↗
2. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
3. A review of available methods and development on energy storage; technology update10.1016/j.rser.2014.01.068 ↗
4. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
5. A comparative review on the specific heat of nanofluids for energy perspective10.1016/j.rser.2014.05.081 ↗
6. An investigation into the thermophysical and rheological eproperties of nanofluids for solar thermal applications10.1016/j.rser.2015.10.065 ↗
7. The effect of nanoparticle morphology on the specific heat of nanosalts10.1016/j.ijheatmasstransfer.2015.11.064 ↗
8. Recent progress in solar thermal energy storage using nanomaterials10.1016/j.rser.2016.09.034 ↗
9. Specific heat control of nanofluids: a critical review10.1016/j.ijthermalsci.2016.03.024 ↗
10. Heat capacity of nanofluids for solar energy storage produced by dispersing oxide nanoparticles in nitrate salt mixture directly at high temperature10.1016/j.solmat.2017.04.011 ↗
11. Unexpected effect of nanoparticles doping on the corrosivity of molten nitrate salt for thermal energy storage10.1016/j.solmat.2018.01.002 ↗
12. Schuller · 2012
13. Padmanaban · 2011
14. Corrosion of stainless steels and low-Cr steel in molten Ca (NO3)2–NaNO3–KNO3 eutectic salt for direct energy storage in CSP plants10.1016/j.solmat.2015.05.004 ↗
15. Corrosion testing device for in-situ corrosion characterization in operational molten salts storage tanks: a516 Gr70 carbon steel performance under molten salts exposure10.1016/j.solmat.2016.06.005 ↗
16. The effect of humidity, impurities and initial state on the corrosion of carbon and stainless steels in molten HitecXL salt for CSP application10.1016/j.solmat.2017.08.026 ↗
17. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
18. Corrosion of High Temperature Alloys in Solar Salt at 400, 500 and 680 C. Sandia Report 2013. Sand 2013-8256.
19. High temperature corrosion in molten solar salt: the role of chloride impurities10.1002/maco.201609300 ↗
20. Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems10.1016/j.apenergy.2015.08.131 ↗
21. Corrosion resistance of Hastelloys in molten metal-chloride heat-transfer fluids for concentrating solar power applications10.1016/j.solener.2014.02.002 ↗
22. Slurry aluminizing: a solution for molten nitrate salt corrosion in concentrated solar power plants10.1016/j.solmat.2015.11.024 ↗
23. Evaluation of hot corrosion behavior of plasma sprayed scandia and yttria co-stabilized nanostructured thermal barrier coatings in the presence of molten sulfate and vanadate salt10.1016/j.jeurceramsoc.2014.08.029 ↗
24. A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts10.1016/j.corsci.2014.03.012 ↗
25. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
26. High-temperature corrosion of Cr–Mo steel in molten LiNO3–NaNO3–KNO3 eutectic salt for thermal energy storage10.1016/j.solmat.2014.10.007 ↗
27. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
28. Corrosion monitoring and mitigation techniques on advanced thermal energy storage materials for CSP plants10.1016/j.solmat.2018.12.028 ↗
29. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications10.1038/s41529-018-0055-0 ↗